Active Topics
-
Firefox with Leste (5)
to Maemo 7 / Leste by teroyk - 4 days, 3 hrs ago -
Handbook (2)
to Maemo 7 / Leste by teroyk - 5 days, 3 hrs ago - more...
|
2014-04-11
, 19:30
|
|
Posts: 290 |
Thanked: 385 times |
Joined on Jan 2012
@ Madrid, Spain
|
#1122
|
Hi.
The vietnam version is the only one which is being accepted by the device without problems.
Now I'm testing the next command:
And this was the result:
I don't know why, after returning success, the device is stuck with the Nokia logo.
I have also tried with the '--erase-user-data', '-c' and flashing EMMC image: it works in the same way.
Regards.
Last edited by pasko; 2014-04-15 at 07:06.
The vietnam version is the only one which is being accepted by the device without problems.
Now I'm testing the next command:
Code:
LAPTOP2:~$ sudo flasher -f -F /home/fernando/Descargas/43AD05DD_DFL61_HARMATTAN_40.2012.21-3.454.6_PR_LEGACY_454_ARM_RM-696_PRD_signed.bin -c
Code:
Got HWID: RM-696:1507
Suitable USB interface (bootrom) not found, waiting...
USB device found at bus 001, device address 040.
Device identifier: (null) (SN: N/A)
Waiting for ASIC id...
Got 69 bytes.
ASIC ID:
05 01 05 01 36 30 07 07 13 02 01 00 12 15 01 bf
fb 62 c1 3b f4 d7 12 52 f2 7b 1c 0b 23 9c c3 43
5c 25 0b 14 15 01 12 dd 2f 66 d4 55 fe 19 2c 62
b9 b8 e2 65 0a fc 1d 9f 3f 90 15 09 01 13 bf 3e
ef 15 52 e7 03
Sending 2nd image (26112 bytes)... done.
Sending ping... pong.
Sending ape-algo (7273728 bytes)... done.
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 041.
Device identifier: 357923XXXXXXXXX (SN: N/A)
Error claiming USB interface: Device or resource busy
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.454.6_PR_454
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Battery level 88 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3377 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1907 kB/s]
[x] rootfs [finished 100 % 1193453 / 1193453 kB 10822 kB/s]
Updating SW release
Success
I have also tried with the '--erase-user-data', '-c' and flashing EMMC image: it works in the same way.
Regards.
Last edited by pasko; 2014-04-15 at 07:06.
 |
|
2014-04-11
, 20:56
|
|
Posts: 4,117 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#1123
|
To me it looks like you "managed" to downgrade from 480 (Switzerland, the absolutely highest FW version). but the device does not "honor" it. 
Under normal circumstances a downgrade is prohibited, so please elaborate how you "managed" to do so.
If I were you I would try once more with 480 variant (works fine in Europe), but ...
Under normal circumstances a downgrade is prohibited, so please elaborate how you "managed" to do so.
If I were you I would try once more with 480 variant (works fine in Europe), but ...
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
|
|
2014-04-12
, 00:15
|
|
Posts: 290 |
Thanked: 385 times |
Joined on Jan 2012
@ Madrid, Spain
|
#1124
|
Hi.
For some reason the device is refusing to flash anything different from the Vietnamesse version.
However, I'm now checking the posibility of a broken partition table, since I don't know the exact origin of the device.
Regards.
For some reason the device is refusing to flash anything different from the Vietnamesse version.
However, I'm now checking the posibility of a broken partition table, since I don't know the exact origin of the device.
Regards.
|
|
2014-04-12
, 10:11
|
|
Posts: 4,117 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#1125
|
With this information I would guess yes your partition layout is broken.
Please search a 16GB Vanilla image matching your needs (it does not matter if same code, just you will have different maps on it. IIRC there should be a 'global' vanilla image out that even does not have any maps on it. Flash it with the option --no-preserve. This will wipe the full device andthe flash again the firmware (or better do it in one step).
Please search a 16GB Vanilla image matching your needs (it does not matter if same code, just you will have different maps on it. IIRC there should be a 'global' vanilla image out that even does not have any maps on it. Flash it with the option --no-preserve. This will wipe the full device andthe flash again the firmware (or better do it in one step).
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
|
|
2014-04-12
, 10:39
|
|
Posts: 290 |
Thanked: 385 times |
Joined on Jan 2012
@ Madrid, Spain
|
#1126
|
OK.
I've been tinkering for a while with no success.
However, I managed to flash a ubiboot kernel (as stated in the thread to install sailfish on N9) and the device booted the ubiboot kernel.
That way I have been able to reconstruct the partition table, according to my still-working N9, then reflashed again to no avail....
Now I'm trying to go back to the Switzerland version to see if I can go ahead.....nothing, still says the Switzerland version is a downgrade ¿?
I'm starting to think I just got a brick instead of an N9
Regards.
I've been tinkering for a while with no success.
However, I managed to flash a ubiboot kernel (as stated in the thread to install sailfish on N9) and the device booted the ubiboot kernel.
That way I have been able to reconstruct the partition table, according to my still-working N9, then reflashed again to no avail....
Now I'm trying to go back to the Switzerland version to see if I can go ahead.....nothing, still says the Switzerland version is a downgrade ¿?
I'm starting to think I just got a brick instead of an N9
Regards.
|
|
2014-04-12
, 10:44
|
|
Posts: 290 |
Thanked: 385 times |
Joined on Jan 2012
@ Madrid, Spain
|
#1127
|
Originally Posted by peterleinchen
Thank you.
With this information I would guess yes your partition layout is broken.
Please search a 16GB Vanilla image matching your needs (it does not matter if same code, just you will have different maps on it. IIRC there should be a 'global' vanilla image out that even does not have any maps on it. Flash it with the option --no-preserve. This will wipe the full device and the flash again the firmware (or better do it in one step).
However I've been trying with the --no-preserve option and it didn't work either.
Will try it again to see what happens with the Vanilla Image.
|
|
2014-04-12
, 10:46
|
|
Posts: 4,117 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#1128
|
Originally Posted by pasko
This is impossible!???
Now I'm trying to go back to the Switzerland version to see if I can go ahead.....nothing, still says the Switzerland version is a downgrade ¿?
(unless you have a PR1.2 image of course. what is the name of image?)And what does flasher -i tell you now?
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
|
|
2014-04-12
, 14:51
|
|
Posts: 290 |
Thanked: 385 times |
Joined on Jan 2012
@ Madrid, Spain
|
#1129
|
To tell you the truth, I don't know.
This is what I'm getting from 'flasher -i':
This is the only image that flashes without problems, but upon reboot, the screen show the logo and stays there forever....
The name of the files I'm flashing are:
Being the first one the Vietnam rootfs (it is a country variant according to mrcrab.net, BTW) and the EMMC file for Switzerland the second.
Now I'm reading the thread about ubiboot for N9, since I have been able to boot the MOSLO and Ubiboot kernel sometimes, but I'm stuck....none of them is able to boot the actual OS.
Regards.
This is what I'm getting from 'flasher -i':
Code:
LAPTOP2:~$ sudo flasher -i flasher 3.12.1 (Oct 5 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... USB device found at bus 001, device address 040. Device identifier: 357923042601874 (SN: N/A) Found device RM-696, hardware revision 1507 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.454.6_PR_454 Success
The name of the files I'm flashing are:
Code:
43AD05DD_DFL61_HARMATTAN_40.2012.21-3.454.6_PR_LEGACY_454_ARM_RM-696_PRD_signed.bin 09F33F15_DFL61_HARMATTAN_40.2012.21-3.ALPS.15_EMMC_ALPS.bin
Now I'm reading the thread about ubiboot for N9, since I have been able to boot the MOSLO and Ubiboot kernel sometimes, but I'm stuck....none of them is able to boot the actual OS.
Regards.
|
|
2014-04-12
, 19:19
|
|
Posts: 4,117 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#1130
|
That is weird.
You do have 456 installed but 480 is claimed to be a downgrade? But you had that Switzerland (480) once installed, right?
BUT the eMMC image is the one for a device with 64GB and should not be used for a 16GB afaik. This could explain the 'missing' partition.
So as I wrote earlier search a vanilla image for a 16GB device and flash it as said:
flasher -F emmc.bin -F firmware.bin -f -R --no-preserve
You do have 456 installed but 480 is claimed to be a downgrade?
But you had that Switzerland (480) once installed, right?BUT the eMMC image is the one for a device with 64GB and should not be used for a 16GB afaik. This could explain the 'missing' partition.
So as I wrote earlier search a vanilla image for a 16GB device and flash it as said:
flasher -F emmc.bin -F firmware.bin -f -R --no-preserve
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
| The Following User Says Thank You to peterleinchen For This Useful Post: | ||
That is the Vietnam variant (059L9X6, 059L9K0, 059M024, 059L9J9, 059N151)
Second, as your flasher says "success" it should indeed be so. How does the device behave?
What flasher commands did you try, did you try to flash it clean? From your output I see you probably only flashed the OS.