Poll: How much would you be willing to pay for a Neo900 (complete device) with TI DM3730 1GHz/512M-RAM/1GB
Poll Options
How much would you be willing to pay for a Neo900 (complete device) with TI DM3730 1GHz/512M-RAM/1GB

Reply
Thread Tools
Community Council | Posts: 4,920 | Thanked: 12,867 times | Joined on May 2012 @ Southerrn Finland
#2841
Originally Posted by pichlo View Post
What is worse? You "wasting" 10 minutes answering a valid concern or us wasting two years waiting for a product that was supposed to be delivered in Q4 2015?
Hey @pichlo, schedules do change and I am satisfied that changes and delays are explained.
And think of it this way; as it is a small design team actually working on the product, the longer it takes the more complete and error-free the end product will be when it finally emerges.
It's not like SW you know; when the boards are ordered it is a bit late to correct bugs! (well, barring simple changes that can be done on the top layer)
 

The Following 6 Users Say Thank You to juiceme For This Useful Post:
pichlo's Avatar
Posts: 6,445 | Thanked: 20,981 times | Joined on Sep 2012 @ UK
#2842
@juiceme, one man's "explained delay" is another man's "excuse".
I am not arguing one way or another, just pleading with joerg_rw to try to see things in a perspective. I hope you understand that the language in the post #2840 sounds rather belligerent given the circumstances. People have asked a valid question. All that @enso did was to try to lighten it up a bit.
__________________
Русский военный корабль, иди нахуй!
 

The Following 6 Users Say Thank You to pichlo For This Useful Post:
joerg_rw's Avatar
Posts: 2,222 | Thanked: 12,651 times | Joined on Mar 2010 @ SOL 3
#2843
@pichlo: one man's "lighten it up" is another man's "antagonizing annoyance" particularly when the content isn't exactly improving the mood of anybody or providing any info, and 3 posts from same author in sequence (with several deleted onces in between) is not exactly considered good style either particularly when you're moderator of a thread where that happens.
Please note that my post referred to the gif posts only and NOT to any concern - others gave a perfect answer already, many thanks for that. I can assure you threre's nobody more angry and unhappy about the long time this whole project takes than me, I'd for sure prefer to do a nice stressless job in industry and earn 5 to 10 times as much as I do with this project that I never meant to run as the only responsible person.

BR
jOERG

edit: on a mini sidenote: our git has been inproved and fixed again, and now Ahycka and Ceene can push too - sorry for the 6 days "downtime": https://neo900.org/git/ee/

Last edited by joerg_rw; 2016-12-20 at 12:24.
 

The Following 11 Users Say Thank You to joerg_rw For This Useful Post:
Posts: 107 | Thanked: 173 times | Joined on Feb 2011
#2844
Since I can't invest what is required to get one, I'm just following the advances of Neo900 from very far. Nonetheless, I've stumbled on this thread about soldering issues during the GTA04 manufacturing process and possible consequences for the Neo900.

Could someone tell us what those consequences would be ?

thanks
 

The Following 16 Users Say Thank You to pierrem For This Useful Post:
fw190's Avatar
Posts: 584 | Thanked: 700 times | Joined on Jan 2010
#2845
The silence from the neo900 team means that the project is probably in deep trouble. Either they are working on a solution or a way to wrap things up.
__________________
per ardua ad astra
 

The Following 3 Users Say Thank You to fw190 For This Useful Post:
Posts: 368 | Thanked: 975 times | Joined on Aug 2013
#2846
It has been mentioned a few times already that most communication regarding the Neo900 is done on their IRC channel. See irc log for the discussion regarding this topic.

https://irclog.whitequark.org/neo900/2017-02-22
 

The Following 18 Users Say Thank You to t-b For This Useful Post:
fw190's Avatar
Posts: 584 | Thanked: 700 times | Joined on Jan 2010
#2847
Great. So everyone should each and every day seat in front of IRC just to be updated? Or each day read the logs from botom to top?

Or they have something like this:
http://neo900.org/ <-- it states "NEWS"
or this:
http://talk.maemo.org/showthread.php?t=93498 <-- it states there "Announcements related to Neo900"

or even this:
https://twitter.com/neo900ug

or what ever.

3 years ago I have donated my N900 for this project believing in it. Today I have more doubts than faith. Situations like this do not bring confidence. No news no nothing. Just RTF IRC ?
__________________
per ardua ad astra
 

The Following 11 Users Say Thank You to fw190 For This Useful Post:
Posts: 368 | Thanked: 975 times | Joined on Aug 2013
#2848
I think the IRC channel is quite informative and the team seems to be responsive there. The people that are most involved in this project are usually logged in and available. It takes a few minutes to read weeks of discussions and I don't think anything is hidden from the public.

After reading the IRC messages and compared to similar projects I have followed I assume that it can still take a while before a Neo900 prototype will be built.
Some messages from IRC I thought were quite telling:

Current status - still working on designing the pcb

11:35 <Joerg-Neo900> (tool development) we're switching from eagle to kicad plus tools wpwrak (and me) developed
11:36 <enyc> whats' eagle still doing? any specific blockers to not needing it at all?
11:37 <Joerg-Neo900> we have the exact position of some mechanical components like card holders and switches defined in eagle. We need to port this to the layout now and make sure it's correct to the <0.1mm while we use a new refined PCB shape
11:38 <Joerg-Neo900> http://neo900.linenoise.info/spread_out.png http://wstaw.org/m/2017/02/23/plasma-desktopD17764.png http://wstaw.org/m/2017/02/23/plasma-desktopC17764.png http://wstaw.org/m/2017/02/23/plasma-desktopV17764.png http://neo900.linenoise.info/outlines.png
The soldering issue:

00:33 <Joerg-Neo900> ravelo: the problems Nikoluas sees are yield problems and are specific to the PCB and process he uses. And he attributes the problems on lower side pf OMAP to a RAM chip on upper side. Which test could I possibly do before I have a PCB specific for Neo900 to make anything sure?
00:34 <Joerg-Neo900> I mused about it already and I couldn't come up with anything reasonable so far
00:35 <Joerg-Neo900> am I worried? Of course. Could I change anything? Only by keeping the issue in mind and keeping an eye on it in all further negotiations and plans
01:07 <Joerg-Neo900> I possibly could get more micron chips like the ones Nikolaus said did work for his GTA04. But that wouldn't help compensate for the financial loss he most likely already suffered from the poor yield and low safety margin he used for his calculations
01:09 <Joerg-Neo900> Neo900 OTOH has 1GB RAM as a much asked for key feature, and we use *exactly* same chips Nokia used in N9, so I don't see any immutable immanent problems here. after all Nokia manufactured a few millions of N9 and I guess they didn't accept such poor yield
01:10 <Joerg-Neo900> Bottom line: I am less worried than Nikolaus seems to be, but his worries just add to my already unbearbly high stress level
To end on a more positive note...

18:45 <DocScrutinizer05> on an unrelated note: first day of this year where I try to crank up my productivity to nominal, after flu and other health issues
TBH I haven't pre-ordered because of exactly this: delays and uncertainties. I do wish the Neo900 team the best though. I am not saying they cannot do a better job communicating, but they are surely carrying most of the burden this community effort takes.
 

The Following 24 Users Say Thank You to t-b For This Useful Post:
joerg_rw's Avatar
Posts: 2,222 | Thanked: 12,651 times | Joined on Mar 2010 @ SOL 3
#2849
[on behalf of atk/Arch-TK (Tomasz Kramkowski) who has no account - yet. Many thanks for this fine summary!]

Today on IRC me (atk) and Joerg discussed an issue which has recently surfaced
on the tinkerphones mailing list [1] regarding the yields Nikolaus Schaller of
goldelico reported with the production of the GTA04A5.

The yields reported by Nikolaus are at 30% which is obviously not financially
viable for production; the issue has been identified as warping during the
soldering of the Samsung PoP [2] memory and DM3730 to the PCB.

The reason this issue has not appeared on prior devices (OpenPandora and
GTA04A4) is because those devices have used Micron PoP memory instead of
Samsung PoP memory which unfortunately is no longer in production.

Since the Neo900 project is also based around the DM3730 it will also need to
use very similar memory and there is a high risk that the issues which arose
during the production of the GTA04A5 will arise during the production of the
Neo900.

There are however some methods that Joerg described which could be used to
mitigate the issue and bring yields to acceptable figures:

Pre-stacking [3] is a method where the PoP memory chip is first soldered to the
DM3730 before being placed on the PCB and reflowed; this method should reduce
the warping and stresses caused by the usual method of soldering such stacked
chips which simply involves soldering them all in one go.

Another option that Joerg has suggested is filling the gap between the
pre-stacked chips with underfill before the chips are soldered to the PCB. This
should make the combined package considerably more rigid and prevent the issues
caused by warping.

Joerg believes that there is a good chance that the sum of these two methods
should solve the yield problems of these "unsolderable" chips. Joerg feels
testing the approach should not cost too much and that the costs incurred would
be in production, as most assembly lines do not have the equipment for
pre-stacking. To add to this, the new idea of adding underfill to the
pre-stacked chips before they are soldered has never been done before.

Joerg estimates the additional production costs may be around $10 to $20 per
device however I personally feel this is an acceptable cost if it means
increased durability of the device.

The full details of the conversation can be found in the logs here:
https://irclog.whitequark.org/neo900...03-14#19041338

[1]: http://lists.goldelico.com/pipermail...ry/001571.html
[2]: https://en.wikipedia.org/wiki/Package_on_package
[3]: http://www.ti.com/lit/an/swpa182c/swpa182c.pdf#19

Last edited by joerg_rw; 2017-03-14 at 22:38.
 

The Following 21 Users Say Thank You to joerg_rw For This Useful Post:
Posts: 457 | Thanked: 599 times | Joined on Feb 2012
#2850
Is project going on? neo900.org has last update last year.
 

The Following 3 Users Say Thank You to teroyk For This Useful Post:
Reply

Tags
neo900, thank you!

Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:30.