Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (0)
to General by Kalatti - 2 days, 23 hrs ago -
Extra softwares in Sailfish using CLI, repositories, etc (117)
to SailfishOS by nieldk - 4 days, 20 hrs ago -
Firefox with Leste (6)
to Maemo 7 / Leste by teroyk - 5 days, 17 hrs ago - more...
|
2010-01-16
, 12:36
|
|
Posts: 27 |
Thanked: 59 times |
Joined on Jan 2010
@ Munich, Germany
|
#2
|
gconftool-2 is your friend ;-)
Output USB disconnected:
Output USB connected with mass-storage-mode:
Now you only have to find out, where these entries exactly are and how to modify them consistently. But I suppose this wont be difficult anymore ;-)
Output USB disconnected:
Code:
Nokia-N900-51-1:~# gconftool-2 -R / | grep usb
sync-usb-mode = false
statusbar_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_dimmed_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_dimmed_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_dimmed_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
mmc-used-over-usb = Schema (type: `bool' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
usb-mode = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
internal-mmc-used-over-usb = Schema (type: `bool' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
usb-device-name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
usb-cable-attached = Schema (type: `bool' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_icon_name = general_adhocwlan
statusbar_dimmed_icon_name = statusarea_internetconnection_no
statusbar_icon_name = general_packetdata
statusbar_dimmed_icon_name = statusarea_internetconn_packetdata_dimmed
statusbar_icon_name = general_wlan
statusbar_dimmed_icon_name = statusarea_internetconnection_no
mmc-used-over-usb = false
usb-mode = idle
internal-mmc-used-over-usb = false
usb-device-name = unknown
usb-cable-attached = false
Output USB connected with mass-storage-mode:
Code:
Nokia-N900-51-1:~# gconftool-2 -R / | grep usb
sync-usb-mode = false
statusbar_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_dimmed_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_dimmed_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_dimmed_icon_name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
mmc-used-over-usb = Schema (type: `bool' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
usb-mode = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
internal-mmc-used-over-usb = Schema (type: `bool' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
usb-device-name = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
usb-cable-attached = Schema (type: `bool' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C')
statusbar_icon_name = general_adhocwlan
statusbar_dimmed_icon_name = statusarea_internetconnection_no
statusbar_icon_name = general_packetdata
statusbar_dimmed_icon_name = statusarea_internetconn_packetdata_dimmed
statusbar_icon_name = general_wlan
statusbar_dimmed_icon_name = statusarea_internetconnection_no
mmc-used-over-usb = false
usb-mode = peripheral
internal-mmc-used-over-usb = true
usb-device-name = USB-Gerät
usb-cable-attached = true
| The Following User Says Thank You to BlueGene For This Useful Post: | ||
 |
|
2010-01-16
, 13:56
|
|
Posts: 664 |
Thanked: 160 times |
Joined on Jul 2008
@ Australia
|
#3
|
Originally Posted by BlueGene
Thanks for this BlueGene. How can I use this with my code. Hopefully I can make use of it.
gconftool-2 is your friend ;-)
Now you only have to find out, where these entries exactly are and how to modify them consistently. But I suppose this wont be difficult anymore ;-)
 |
|
2010-01-18
, 07:24
|
|
Posts: 138 |
Thanked: 375 times |
Joined on Aug 2009
@ Berlin
|
#4
|
Check out http://maemo.org/development/, you can find a link to the GConf Reference Manual right on the front page. There's also a link to the Code samples right there. maemo-examples contains two example GConf programs (one for just setting/reading a GConf key, and one for listening to changes).
| The Following User Says Thank You to pH5 For This Useful Post: | ||
|
|
2010-01-18
, 09:24
|
|
Posts: 664 |
Thanked: 160 times |
Joined on Jul 2008
@ Australia
|
#5
|
Thanks for the tips guys. However, I came across lshal and here's my effort so far without any luck so plz help me if I'm not on the right track. I would be very grateful. Thanks.
Code:
#include <hal/libhal.h>
#include <stdio.h>
#include <string.h>
//void set_up(LibHalContext*);
void _device_added(LibHalContext*, const char*);
void _device_removed(LibHalContext*, const char*);
void _property_modified(LibHalContext*, const char*, const char*, dbus_bool_t, dbus_bool_t);
int main(int argc, char *argv[]){
printf("Starting hal\n");
LibHalContext *ctx = libhal_ctx_new();
DBusConnection *dbus;
dbus = dbus_bus_get(DBUS_BUS_SYSTEM, NULL);
if (dbus == NULL)
printf("ERROR CONNECTION DBUS.\n");
else
printf("Successfully connected to DBus.\n");
printf("connecting hal to dbus.\n");
libhal_ctx_set_dbus_connection(ctx, dbus);
libhal_ctx_set_device_added(ctx, _device_added);
libhal_ctx_set_device_removed(ctx, _device_removed);
libhal_ctx_init(ctx, NULL);
printf("Watching devices...\n");
libhal_device_property_watch_all(ctx, NULL);
return 0;
}
void _device_added(LibHalContext *ctx, const char *udi){
printf("UDI: %s\n", udi);
if (strcmp(udi, "/org/freedesktop/Hal/devices/usb_device_1d6b_2_musb_hdrc") == 0){
printf("Usb added.\n");
}else
printf("Unidentified device added.\n");
}
void _device_removed(LibHalContext *ctx, const char *udi){
printf("UDI: %s\n", udi);
if (strcmp(udi, "/org/freedesktop/Hal/devices/usb_device_1d6b_2_musb_hdrc") == 0){
printf("Usb removed.\n");
}else
printf("Unidentified device removed.\n");
}
I was wondering if anyone can help me as to how I can check if the device is in usb or pc suite mode. I checked libosso but couldn't get any clue and also checked the mce-dev but couldn't see usb/pc modes anywhere. Also I tried going through dbus api but couldn't figure out where to look. So, I would be very grateful for any hints/help coz I'm completely noob when it comes to these api. Thanks