Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (6)
to General by Kalatti - 5 days, 21 hrs ago - more...
geohsia |
2010-06-03
, 06:56
|
|
Posts: 515 |
Thanked: 259 times |
Joined on Jan 2010
|
#1031
|
Originally Posted by titan
I have a HDD that has its own internal power. If someone needs to test host mode with no power I am happy to give it a shot.
|
|
2010-06-03
, 07:15
|
|
Posts: 946 |
Thanked: 1,650 times |
Joined on Oct 2009
@ Germany
|
#1032
|
this my HOWNOTTO get USB hostmode working.
I hope someone can replicate MohammadAG's success or at least find out what I did wrong.
Warning: This is only for experts! i2cset may damage your device.
0. you need a USB F/F adapter, the N900 USB cable and a USB device with < 200mA power consumption (verify on your PC)
1. install MohammadAG's kernel (with sarahn's patches + power ignore patch + appropriate configuration), i2ctools (i2cset in PATH) and sysklogd
I have PR1.2 installed, wifi on, bluetooth off, 2.5G, autodisconnect on. egoshin's method works (set to host while connected to PC)
2. boot device with USB cable but without USB device connected
3.
optional:
and
4. run the attached script ("sh host.txt -d" shows the state after every step)
5. immediately plug in the USB device
6. check dmesg and /proc/driver/musb_hdrc
7. to retry, unplug USB device,
after about 30sec you should see:
then go to 4.
my results: (with -d flag)
start: Mode=Peripheral (Power=20, DevCtl=80)
echo H: Mode=Peripheral (Power=20, DevCtl=82)
echo e: Mode=Peripheral (Power=20, DevCtl=82)
echo F: Mode=Peripheral (Power=60, DevCtl=83)
bme stopped: Mode=Peripheral (Power=60, DevCtl=83)
slept 3sec: Mode=Peripheral (Power=20, DevCtl=80)
i2cset: Mode=Peripheral (Power=f1, DevCtl=99)
later: Mode=Peripheral (Power=e1, DevCtl=99)
for the description of the power+devctl flags see drivers/usb/musb/musb_regs.h
with egoshin's method:
Status: MHDRC, Mode=Host (Power=f0, DevCtl=dd)
OTG state: b_peripheral:3; active
dmesg:
what MohammadAG got with the same commands (his device is in R&D mode, but it didn't make a difference for me):
Status: MHDRC, Mode=Host (Power=f0, DevCtl=dd)
OTG state: a_host:9; active
with flash plugged in (not powered on)
Status: MHDRC, Mode=Host (Power=e0, DevCtl=99)
with bme:
Status: MHDRC, Mode=Host (Power=20, DevCtl=80)
MohammadAG: OTG state: b_idle:1; inactive
If I first apply egoshin's method I get
Status: MHDRC, Mode=Host (Power=e1, DevCtl=99)
OTG state: b_idle:1; inactive
but again no device is detected.
Last edited by titan; 2010-06-03 at 08:16.
I hope someone can replicate MohammadAG's success or at least find out what I did wrong.
Warning: This is only for experts! i2cset may damage your device.
0. you need a USB F/F adapter, the N900 USB cable and a USB device with < 200mA power consumption (verify on your PC)
1. install MohammadAG's kernel (with sarahn's patches + power ignore patch + appropriate configuration), i2ctools (i2cset in PATH) and sysklogd
I have PR1.2 installed, wifi on, bluetooth off, 2.5G, autodisconnect on. egoshin's method works (set to host while connected to PC)
2. boot device with USB cable but without USB device connected
3.
Code:
pcsuite-enable.sh
Code:
echo USB debug start > /var/log/syslog
Code:
echo 10 > /sys/module/musb_hdrc/parameters/debug
5. immediately plug in the USB device
6. check dmesg and /proc/driver/musb_hdrc
7. to retry, unplug USB device,
Code:
killall sh; start bme; sleep 2; cat /proc/driver/musb_hdrc
Code:
Status: MHDRC, Mode=Peripheral (Power=20, DevCtl=80)
my results: (with -d flag)
start: Mode=Peripheral (Power=20, DevCtl=80)
echo H: Mode=Peripheral (Power=20, DevCtl=82)
echo e: Mode=Peripheral (Power=20, DevCtl=82)
echo F: Mode=Peripheral (Power=60, DevCtl=83)
bme stopped: Mode=Peripheral (Power=60, DevCtl=83)
slept 3sec: Mode=Peripheral (Power=20, DevCtl=80)
i2cset: Mode=Peripheral (Power=f1, DevCtl=99)
later: Mode=Peripheral (Power=e1, DevCtl=99)
for the description of the power+devctl flags see drivers/usb/musb/musb_regs.h
with egoshin's method:
Status: MHDRC, Mode=Host (Power=f0, DevCtl=dd)
OTG state: b_peripheral:3; active
dmesg:
Code:
[ 1863.465087] musb_restore_ctx_and_resume 435: restoring register context for musb_restore_ctx_and_resume [ 1863.465087] rx51_xceiv_power 1 [ 1863.465698] rx51_xceiv_reset [ 1863.850799] musb_interrupt 1948: ** IRQ peripheral usb0001 tx0000 rx0000 [ 1863.850830] musb_stage0_irq 643: <== Power=e5, DevCtl=99, int_usb=0x1 [ 1863.850860] musb_stage0_irq 829: SUSPEND (b_idle) devctl 99 power e5 [ 1863.874389] musb_interrupt 1948: ** IRQ peripheral usb0001 tx0000 rx0000 [ 1863.874420] musb_stage0_irq 643: <== Power=e1, DevCtl=99, int_usb=0x1 [ 1863.874420] musb_stage0_irq 829: SUSPEND (b_idle) devctl 99 power e1 [ 1871.680358] musb_platform_try_idle 160: b_idle inactive, for idle timer for 7 ms
Status: MHDRC, Mode=Host (Power=f0, DevCtl=dd)
OTG state: a_host:9; active
with flash plugged in (not powered on)
Status: MHDRC, Mode=Host (Power=e0, DevCtl=99)
with bme:
Status: MHDRC, Mode=Host (Power=20, DevCtl=80)
MohammadAG: OTG state: b_idle:1; inactive
If I first apply egoshin's method I get
Status: MHDRC, Mode=Host (Power=e1, DevCtl=99)
OTG state: b_idle:1; inactive
but again no device is detected.
Last edited by titan; 2010-06-03 at 08:16.
| The Following 12 Users Say Thank You to titan For This Useful Post: | ||
 |
|
2010-06-03
, 07:35
|
|
Posts: 876 |
Thanked: 396 times |
Joined on Dec 2009
|
#1033
|
Thanks a bunch, please keep this post up to date as new info becomes available 
I'll bookmark it.
Edit: is it possible that different versions of the firmwares may affect this?
Last edited by Bec; 2010-06-03 at 07:39.
I'll bookmark it.
Edit: is it possible that different versions of the firmwares may affect this?
__________________
- RATE SOME OF THE BEST USER EXPERIENCE BRAINSTORMS: PLUGIN TO LAUNCH EMBEDDED VIDEOS IN MEDIA PLAYER |
Last edited by Bec; 2010-06-03 at 07:39.
 |
|
2010-06-03
, 09:05
|
|
Posts: 2,473 |
Thanked: 12,265 times |
Joined on Oct 2009
@ Jerusalem, PS/IL
|
#1034
|
titan, just a note, according to lsusb -v my flash drive also uses 200mA.
Doing some tsts after you left I can see what you experience. I'm afraid at the time being you'll have to time it right after running the script.
Anyways, I can still reproduce it
Doing some tsts after you left I can see what you experience. I'm afraid at the time being you'll have to time it right after running the script.
Anyways, I can still reproduce it
| The Following User Says Thank You to MohammadAG For This Useful Post: | ||
|
|
2010-06-03
, 09:13
|
|
Posts: 36 |
Thanked: 2 times |
Joined on Jan 2010
|
#1035
|
Originally Posted by titan
Where I can download MohammadAG's kernel?
...1. install MohammadAG's kernel (with sarahn's patches + power ignore patch + appropriate configuration), i2ctools (i2cset in PATH) and sysklogd...
|
|
2010-06-03
, 09:16
|
|
Posts: 2,473 |
Thanked: 12,265 times |
Joined on Oct 2009
@ Jerusalem, PS/IL
|
#1036
|
Originally Posted by KOJAN
Apply the patches and build a kernel.
Where I can download MohammadAG's kernel?
A binary won't be provided till the app is released
| The Following 4 Users Say Thank You to MohammadAG For This Useful Post: | ||
|
|
2010-06-03
, 09:19
|
|
Posts: 876 |
Thanked: 396 times |
Joined on Dec 2009
|
#1037
|
Isn't it possible to stop any event from happening with the stick connected so that we could use two scripts, one to let the device recognize the connection only when we want it and then "host.txt"?
This could solve our synchronization issue.
Can't the 200mA limit be overridden with kernel patching?
This could solve our synchronization issue.
Can't the 200mA limit be overridden with kernel patching?
__________________
- RATE SOME OF THE BEST USER EXPERIENCE BRAINSTORMS: PLUGIN TO LAUNCH EMBEDDED VIDEOS IN MEDIA PLAYER |
|
|
2010-06-03
, 09:20
|
|
Posts: 2,473 |
Thanked: 12,265 times |
Joined on Oct 2009
@ Jerusalem, PS/IL
|
#1038
|
The 200mA limit is a hardware one.
| The Following 4 Users Say Thank You to MohammadAG For This Useful Post: | ||
|
|
2010-06-03
, 09:24
|
|
Posts: 876 |
Thanked: 396 times |
Joined on Dec 2009
|
#1039
|
Also since the sate of an USB device being connected becomes a state defined in the ram memory of the device, would it be possible to simply patch (some of) the code in the ram to skip some of the steps?
__________________
- RATE SOME OF THE BEST USER EXPERIENCE BRAINSTORMS: PLUGIN TO LAUNCH EMBEDDED VIDEOS IN MEDIA PLAYER |
 |
|
2010-06-04
, 09:11
|
|
Posts: 466 |
Thanked: 180 times |
Joined on Feb 2010
|
#1040
|
@Bec no offense, but this has been requested already, please keep this thread for development only.
use this thread instead for petitions and questions. developers comment there too
http://talk.maemo.org/showthread.php...ight=host+mode
use this thread instead for petitions and questions. developers comment there too
http://talk.maemo.org/showthread.php...ight=host+mode
| The Following User Says Thank You to clasificado For This Useful Post: | ||
 |
| Tags |
| awesomeness in the works, boulevard of broken deals, host, i am the dealbreaker, inspector gadget lies, mobidapter is a scam, nokia fanbois, otg, over 9000, usb, usbcontrol |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 01:06.