Notices


Reply
Thread Tools
kick's Avatar
Posts: 61 | Thanked: 88 times | Joined on Jan 2017 @ India
#21
i was wondering is it possible to write the cmt partition completely as in /dev/cmt with the files in the 003 variant dumped from another n9 by using aegis and inception in conjugation to delete the cmt completely and paste the new files there

EDIT-probably a recipie for brick but still is it possible and if it is can some link the dumped files
 

The Following User Says Thank You to kick For This Useful Post:
Posts: 1,132 | Thanked: 1,794 times | Joined on Feb 2011 @ The Netherlands
#22
C:\Program Files\Nokia\Flasher>flasher -f -F china.bin --flash-only=cmt --no-preserve

You did only flash CMT, what happens if you flash full 003 with --no-preserve or erase?

Probably you can extract it from the image.

Does the flasher have unpack option?
I know that 0xFFFF has for N900 but not for N9 yet.
__________________
N900 loaded with:
CSSU-T (Thumb)
720p recording,
Pierogi, Lanterne, Cooktimer, Frogatto
N9 16GB loaded with:
Kernel-Plus
--
[TCPdump & libpcap | ngrep]
--
donate

Last edited by mr_pingu; 2017-08-09 at 14:32.
 

The Following User Says Thank You to mr_pingu For This Useful Post:
kick's Avatar
Posts: 61 | Thanked: 88 times | Joined on Jan 2017 @ India
#23
trying a zeroise with --no-preserve as you suggested now will report in a little while(as soon as its done)

EDIT- nope no progress on zeroise with --no-preserve(tough i guess that was to be expectedwell heres the log anyways
Code:
C:\Windows\system32>cd C:\Program Files\Nokia\Flasher

C:\Program Files\Nokia\Flasher>flasher -f -F china.bin --no-preserve --erase-user-data=secure
flasher 3.12.1 (Oct  6 2011) Harmattan
Warning: --no-preserve is not recommended, instead use erase commands
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 16427 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8

Battery level 85 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 89 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[_] cmt-mcusw    [finishing   75 %    6050 /    6050 kB    3304 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    3244 kB/s]
[_] rootfs       [writing     10 %  143360 / 1188233 kB    6400 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[f] cmt-mcusw    [finishing    0 %    6050 /    6050 kB    3304 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    3244 kB/s]
[x] rootfs       [finished   100 % 1188233 / 1188233 kB    8822 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_POWER_OFF not received
CMT RFS failed
[Pipe   7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>flasher -f -F china.bin -F emmc.bin --flash-only=mmc
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 90 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] mmc          [finished   100 %  261587 /  261587 kB   10922 kB/s]
Success

C:\Program Files\Nokia\Flasher>

Last edited by kick; 2017-08-09 at 14:55.
 

The Following User Says Thank You to kick For This Useful Post:
kick's Avatar
Posts: 61 | Thanked: 88 times | Joined on Jan 2017 @ India
#24
the only problem im having now is whenever i insert the sim card the imei goes away therefore i am unable to connect to the network i reboot the device and the imei is fine and present
 

The Following User Says Thank You to kick For This Useful Post:
Posts: 1,132 | Thanked: 1,794 times | Joined on Feb 2011 @ The Netherlands
#25
Originally Posted by kick View Post
trying a zeroise with --no-preserve as you suggested now will report in a little while(as soon as its done)

EDIT- nope no progress on zeroise with --no-preserve(tough i guess that was to be expectedwell heres the log anyways
Code:
C:\Windows\system32>cd C:\Program Files\Nokia\Flasher

C:\Program Files\Nokia\Flasher>flasher -f -F china.bin --no-preserve --erase-user-data=secure
flasher 3.12.1 (Oct  6 2011) Harmattan
Warning: --no-preserve is not recommended, instead use erase commands
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 16427 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8

Battery level 85 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 89 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[_] cmt-mcusw    [finishing   75 %    6050 /    6050 kB    3304 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    3244 kB/s]
[_] rootfs       [writing     10 %  143360 / 1188233 kB    6400 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[f] cmt-mcusw    [finishing    0 %    6050 /    6050 kB    3304 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    3244 kB/s]
[x] rootfs       [finished   100 % 1188233 / 1188233 kB    8822 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_POWER_OFF not received
CMT RFS failed
[Pipe   7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>flasher -f -F china.bin -F emmc.bin --flash-only=mmc
flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 90 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] mmc          [finished   100 %  261587 /  261587 kB   10922 kB/s]
Success

C:\Program Files\Nokia\Flasher>
I'm giving up. Would gladly upload my CMT but it's no 003 CMT if that matters. But I guess it will change you're N9 into a brick like you said.

You could try to force flash / downgrade using JAF or any of the other Baseband 5 flashing tools I suggested. But again no guarantees.

Edit: Did you try cold-flash. Probably won't work but you can try
__________________
N900 loaded with:
CSSU-T (Thumb)
720p recording,
Pierogi, Lanterne, Cooktimer, Frogatto
N9 16GB loaded with:
Kernel-Plus
--
[TCPdump & libpcap | ngrep]
--
donate
 

The Following 2 Users Say Thank You to mr_pingu For This Useful Post:
kick's Avatar
Posts: 61 | Thanked: 88 times | Joined on Jan 2017 @ India
#26
i would gladly try anything at this point in time to fix the cmt so if anyone reading the thread has any clear ideas please tell me and please explain the steps required briefly(just dont tell me to do anything that has a brick possibility of 50% or more)
 

The Following User Says Thank You to kick For This Useful Post:
kick's Avatar
Posts: 61 | Thanked: 88 times | Joined on Jan 2017 @ India
#27
for now ill just start uploading the firmware files to my mega account as its really hard these days finding fixed firmware files
 

The Following User Says Thank You to kick For This Useful Post:
Posts: 392 | Thanked: 707 times | Joined on Aug 2014
#28
Originally Posted by mr_pingu View Post
It seems that you can create RPL from PM backup. Making a PM backup and then make RPL from it and write RPL might fix it too.
Maybe Cyclone Box software can be hacked to work over USB too.Or maybe it works out of the box over USB.
It is Cyclone Box/Cyclone Key Reloaded which achieves the function you mentioned:
http://forum.gsmhosting.com/vbb/f528...added-1483437/

Surprisingly although software has not been updated for years, support server moved to new address in January 2017. consequently was able to update my Cyclone Key Reloaded and Read PM upon N9 via USB connection without any modification.

Last edited by aspergerguy; 2017-08-11 at 13:12. Reason: Addition
 

The Following 2 Users Say Thank You to aspergerguy For This Useful Post:
kick's Avatar
Posts: 61 | Thanked: 88 times | Joined on Jan 2017 @ India
#29
so how does it work gimme some steps and ill do em(as ive never used something like this before so what i need is the link to it and what to do to get a rpl backup ill try and figure the rest out from there)
__________________
Hello There!

Mobile Phone's ownned at the moment
INTEX aqua fish , Micromax Canvas A1, nokia n9 , nokia e63, nokia 5233 , nokia 6200, Yu Yunicorn

Phones Bricked Till Date=4(dont worry i did fix each one eventually (well...almost(except the cmt issue in the n9)))
 

The Following User Says Thank You to kick For This Useful Post:
Posts: 392 | Thanked: 707 times | Joined on Aug 2014
#30
Sorry for not getting back sooner, beginning to think that Cyclone can only only backup PM or write factory BB5 RPL but not backup RPL upon N9. Any attempt fails with attempting to put device in RAW mode. There is a backup RPL feature within Flashing function although have never used Cyclone for this feature but always Harmattan flasher, so can't confirm validity of what is saved.
 

The Following User Says Thank You to aspergerguy For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 22:08.