Active Topics

 


Reply
Thread Tools
Posts: 110 | Thanked: 362 times | Joined on May 2014
#1
Hi
My N900 is no phone anymore and im searching a shop to reflow/reball my gsm driver.

I tried the spring epoxy fix in multiple variations and got an improvement, but calls are dropping still sometimes.

A "new" n900 is no option cause it seems it is just a question of time till it breaks.

If you know a repair shop or someone who is willing to fix this in Europe please post.
(Otherwise i will put my hot iron to work on that RAPUYAMA and you cant want that)

(Im on a S2 CM11 at the Moment and it feels like a toy compared to n900)
 

The Following 2 Users Say Thank You to pythoneye2 For This Useful Post:
Estel's Avatar
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#2
If you can find a place that reflow things for PS portable (or other, similarly sized pieces of electronic), they should be able to do it for N900. you must be able to tell them which chip exactly have broken solder joints.

Other than that, roaster oven reflow in home is only solution. I have one N90 0with exactly this problem, that is used by my son (almost 6 years old, he doesn't need SIM functionality yet, but broken modem breaks GPS, too...), and I'll try to do this repair as soon as I get a fully working replacement for him. Just for the sake of curiosity, baking N900 in home oven sounds like lot of fun for whole geeky family

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following 3 Users Say Thank You to Estel For This Useful Post:
pichlo's Avatar
Posts: 6,445 | Thanked: 20,981 times | Joined on Sep 2012 @ UK
#3
Originally Posted by pythoneye2 View Post
A "new" n900 is no option cause it seems it is just a question of time till it breaks.
Out of the four N900s that have passed through my hands, ONE has suffered the problem. And I got it that way from the previous owner. What are you people doing to your phones?
 

The Following 4 Users Say Thank You to pichlo For This Useful Post:
Posts: 110 | Thanked: 362 times | Joined on May 2014
#4
I dont like the Oven:
n900 is mounted on both sides, (how do you fix gravity?)
i did epoxy usb fix and dont want to burn it down.

DIY could be fun, some ideas:
1. http://www.youtube.com/watch?v=LIaZ8I7TxDM (i would try it with flux)
2. http://www.youtube.com/watch?v=6eNKsm5BiIk You just need the right temperature and duration
3. get a hot air soldering station, and doing the spring fix anyway (http://talk.maemo.org/showthread.php?t=36447&page=20)

but it "sometimes" doesnt work.

What would be the Temperatur for N900 lead free solder and how long should it be applied, any flux recommendations, pro tipps (except dont do it ).

@pichlo I dont know. Its my first n900 and im not doing Parkour.. (http://talk.maemo.org/showthread.php...&postcount=234)

PS: A pro would still be nice.
 

The Following User Says Thank You to pythoneye2 For This Useful Post:
Posts: 124 | Thanked: 105 times | Joined on Jul 2010
#5
Originally Posted by pichlo View Post
Out of the four N900s that have passed through my hands, ONE has suffered the problem. And I got it that way from the previous owner. What are you people doing to your phones?
I've had 3 out of 5 die of this problem within 2 years, (one used, two new).
OTOH never had any problem with USB port, so I'd ask what ppl are doing there??

I suspect it's to do with humidity; all 3 died in the summer where we get 80-90% humidity normally. Luckily this summer was unusually cool and dry so hopefully my current unit will last longer
 

The Following User Says Thank You to nman For This Useful Post:
Estel's Avatar
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#6
Originally Posted by pythoneye2 View Post
i did epoxy usb fix and dont want to burn it down.
Epoxy for USB port isn't a fix, it's placebo. OTOH, indeed, it could cause problems with roaster oven.

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following 3 Users Say Thank You to Estel For This Useful Post:
Posts: 330 | Thanked: 556 times | Joined on Oct 2012
#7
Originally Posted by nman View Post
I've had 3 out of 5 die of this problem within 2 years, (one used, two new).
OTOH never had any problem with USB port, so I'd ask what ppl are doing there??

I suspect it's to do with humidity; all 3 died in the summer where we get 80-90% humidity normally. Luckily this summer was unusually cool and dry so hopefully my current unit will last longer
Two summers ago I had this problem 2 or 3 times, but it went away on its own. I suppose it could have been software related though.

Or maybe the long commute in high temperatures inside my car "reflowed" the modem chip connections, much as it reflowed my brain.
 

The Following User Says Thank You to malfunctioning For This Useful Post:
Posts: 110 | Thanked: 362 times | Joined on May 2014
#8
Status update:
Good news and bad news.
Good news:
found a "pro" console (no mobile shop could be found) shop (thanks to Estels hint) who did a reball on gazoo and rapuyama and it seems to be working.
Bad news:
The keyboard mate/white foil didnt survive.
HeatMap.jpg
The Camera module dont like heat.
heat.jpg

seems shop only "pro" in taking money, i guess i should not have joked about how to (not) do it.

I should have done it myself, would have been much more fun..

Is there a n900 hardware test script to find all defective parts?

i guess i can replace the camera module and the foil, but havent found a place where to get the white foil.

I guess i have to get another n900 and merge.

Damn: I'll miss the mighty week!
 

The Following 2 Users Say Thank You to pythoneye2 For This Useful Post:
Posts: 110 | Thanked: 362 times | Joined on May 2014
#9
I finally made it: It seems i succesfully reflowed a n900 with loose gsm chips. (My disastrous current ratio 1 of 3) I even filmed it. But I used a n900 and sadly i learned that the max film record length did not suffice to capture the beauty of the procedure. Even worse even the first parts seems to be not ok.Thats kind of sad, cause the prices of n900 seems on the rise again, and cause im missing polling i like to start a new poll -> New thread.
 

The Following 2 Users Say Thank You to pythoneye2 For This Useful Post:
endsormeans's Avatar
Posts: 3,139 | Thanked: 8,156 times | Joined on Feb 2013 @ From my Gabriola Island hermitage, near the Edge of the World
#10
I have one that is a "All telephony functions.." marvel...
Bought it way back when from a guy who told me it had the issue..
Haven't bothered attempting to fix it since it could roast the n900 ....
an oven baked meal I can't even eat!


I have been using it for the wifi and as a home computing station...
hubbed with mouse, keyboard and plugged into a 40 inch flat screen....
Been thinking of selling it lately...

Anyway....

Bring on the Poll!!!

Will there be pop and chips ? Hope so
__________________
Lurker since 2007, Member since 2013, Certifiable since 1972

Owner of :
1-n770 (in retirement), 3-n800's / 3-n810's (still in daily use), 5-n900's ((3 are flawless, 1 loose usb ( parts), 1 has no telephony (parts))
3-nexus 5's : 1 w/ Floko Pie 9.1 (running beautifully) waiting for Stable Droid 10 rom, 1 w/ ̶Ubuntu Touch, 1 with Maru OS (intend maemo leste when ready)

1/2 - neo900 pre- "purchased" in 2013. N̶o̶w̶ ̶A̶w̶a̶i̶t̶i̶n̶g̶ ̶r̶e̶f̶u̶n̶d̶ ̶p̶r̶o̶c̶e̶s̶s̶ ̶l̶a̶s̶t̶ ̶f̶e̶w̶ ̶y̶e̶a̶r̶s̶ - neo900 start up declared officially dead -
Lost invested funds.


PIMP MY N8X0 (Idiot's Guide and a video walkthrough)http://talk.maemo.org/showthread.php?t=94294
THE LOST GRONMAYER CATALOGShttp://talk.maemo.org/showthread.php...ight=gronmayer
N8X0 VIDEO ENCODING THE EASY WAYhttp://talk.maemo.org/showthread.php...ght=mediacoder
242gb ON N800http://talk.maemo.org/showthread.php?t=90634
THE PAIN-FREE MAEMO DEVELOPMENT LIVE DISTRO-ISO FOR THE NOOB TO THE PROhttp://talk.maemo.org/showthread.php?t=95567
AFFORDABLE MASS PRODUCTION FOR MAEMO PARTShttp://talk.maemo.org/showthread.php?t=93325

Meateo balloons now available @ Dave999's Meateo Emporium
 

The Following 2 Users Say Thank You to endsormeans For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 05:28.