Active Topics

 


Reply
Thread Tools
Posts: 14 | Thanked: 5 times | Joined on Mar 2013
#621
Originally Posted by starkwiz View Post
I found a fix.
install u-boot-tools package from shell.
After installation.
Run u-boot-update-menu that should fix the issue.
great but how

can you describe step by step please

Last edited by bogdanov_s; 2013-04-11 at 11:39.
 
Posts: 39 | Thanked: 32 times | Joined on Jan 2010 @ Sha Tin, Hong Kong
#622
I'm running CSSU-Thumb and backupmenu/bootmenu and am trying to boot Nemo from an SD card. In the past, i've used the flasher with -k and -l switches and it's booted fine. That's not bringing me any joy (doesn't get past upgrade mode screen, maybe not even receiving the kernel?) and I like the idea of actually being able to reboot into Nemo without having a machine and the flasher with me so am wanting to install U-boot. Currently getting errors from HAM about the correct version of kernel-modules being installed.

Am I correct in thinking that it can't be done this way around, that I'd have to reflash, install U-boot then do the upgrades?

Last edited by andyr0ck; 2013-04-11 at 13:20.
 
Posts: 17 | Thanked: 9 times | Joined on Apr 2012 @ India
#623
Originally Posted by bogdanov_s View Post
great but how

can you describe step by step please
If you are using faster application manager.
Open X Terminal, gain root access.
and type "fapt-get install u-boot-tools"
This will prompt you to upgrade the package, confirm with yes.
If not using FAM then replace fapt-get with apt-get.

Hope this helps.
 
Posts: 14 | Thanked: 5 times | Joined on Mar 2013
#624
Originally Posted by starkwiz View Post
If you are using faster application manager.
Open X Terminal, gain root access.
and type "fapt-get install u-boot-tools"
This will prompt you to upgrade the package, confirm with yes.
If not using FAM then replace fapt-get with apt-get.

Hope this helps.
i understand and the first time the problem is that i can't start maemo ... every time i'm in reboot loop
if i start maemo OS with x term i know what to do , but i can't force phone to start OS
 
Posts: 17 | Thanked: 9 times | Joined on Apr 2012 @ India
#625
Originally Posted by bogdanov_s View Post
i understand and the first time the problem is that i can't start maemo ... every time i'm in reboot loop
if i start maemo OS with x term i know what to do , but i can't force phone to start OS
I was able to boot into maemo default kernel but wasn't able to boot into power kernel.

I am not sure how this can be fixed without booting into the os.
Check with Pali.
Maybe you'll need to reflash.
 
Posts: 14 | Thanked: 5 times | Joined on Mar 2013
#626
Originally Posted by starkwiz View Post
I was able to boot into maemo default kernel but wasn't able to boot into power kernel.

I am not sure how this can be fixed without booting into the os.
Check with Pali.
Maybe you'll need to reflash.
yes i know but i cant reflsh i just don't know how
device go in flash mode (breath light is constant orangre) and in a few seconds start u-boot i go in reboot loop ..
 
Posts: 2,153 | Thanked: 8,462 times | Joined on May 2010
#627
In Friday will be released new version of uboot with upstreamed all n900 patches :-)

So in the weekend I will compile official release and push to extras-devel.

You can expect ext2/3/4 support for bootmenu and booting 3.x kernels too.

Mission completed.
 

The Following 18 Users Say Thank You to pali For This Useful Post:
Estel's Avatar
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#628
Out of curiosity - will there be (again) some differences between practical functionality of version from -devel and one hosted on your site?

IIRC, last time, such thing were due to old compiler used by repos. Also, I don't think that anything changed re compiler use by Maemo infra.

You're aware, that only version from -devel wasn't able to boot 3.* kernels, while same version from your site, booted them well... Right?

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following User Says Thank You to Estel For This Useful Post:
Posts: 2,153 | Thanked: 8,462 times | Joined on May 2010
#629
@Estel: I will push u-boot binary (compiled with my working compiler) to extras-devel, so this problem will be fixed. So we will have only one version of uboot which will work for anything.
 

The Following 7 Users Say Thank You to pali For This Useful Post:
Sohil876's Avatar
Posts: 130 | Thanked: 132 times | Joined on Jan 2013 @ India
#630
Originally Posted by pali View Post
@Estel: I will push u-boot binary (compiled with my working compiler) to extras-devel, so this problem will be fixed. So we will have only one version of uboot which will work for anything.
Thanks for your awesome work . But this time can you please upload a uboot + power kernel 52 package too, like uboot-power, if not in repo then upload as attachment here for cssu thumb and power kernel users? , latest uboot and kp52 will be great since i and all cssu thumb users cant boot stock kernel and many use kernel power even if theyre not using cssu thumb.

Last edited by Sohil876; 2013-04-18 at 06:40.
 

The Following 3 Users Say Thank You to Sohil876 For This Useful Post:
Reply

Tags
bootmenu, u-boot


 
Forum Jump


All times are GMT. The time now is 01:18.