Notices


Reply
Thread Tools
Posts: 323 | Thanked: 1,709 times | Joined on Jul 2014
#41
Originally Posted by persmule View Post
Hi all.
I just installed the sfos build on a scorpion_windy device, But I have noticed that it hangs when booting with a MicroSD card inserted (The LED will die out after going white), and boots successfully without one.
Yes Ive noticed this as well with my latest build, can I get some details about your sd card?

What size and File system is it?
__________________
SirenSong v0.5
Like my work? buy me a beer
 

The Following User Says Thank You to r0kk3rz For This Useful Post:
Posts: 9 | Thanked: 11 times | Joined on Jun 2012
#42
Originally Posted by r0kk3rz View Post
Yes Ive noticed this as well with my latest build, can I get some details about your sd card?

What size and File system is it?
# fdisk -l /dev/mmcblk1
Disk /dev/mmcblk1: 119.1 GiB, 127865454592 bytes, 249737216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x5a420b21

Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 32768 249737215 249704448 119.1G 83 Linux

The FS type of /dev/mmcblk1p1 is ext4, and the whole content of the card was cloned (via dd-ing the mbr and e2mage-ing the partition) from a nearly identical card inserted on my Sailfish X phone.

Besides, I frequently see the following complaints in the system journal:
Code:
kernel: mmc1: mmc_set_auto_bkops: error in setting auto bkops to 1 (-74)
kernel: mmc1: mmc_init_card: Failed to enable auto-bkops: err: -74

Last edited by persmule; 2018-04-29 at 16:47. Reason: Add FS type
 

The Following 2 Users Say Thank You to persmule For This Useful Post:
Posts: 9 | Thanked: 11 times | Joined on Jun 2012
#43
If another card with the following content in installed, the system can boot successfully:

# fdisk -l /dev/mmcblk1
Disk /dev/mmcblk1: 59.5 GiB, 63864569856 bytes, 124735488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x72b82eac

Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 2048 124735487 124733440 59.5G 83 Linux

The FS type of /dev/mmcblk1p1 is also ext4.

Last edited by persmule; 2018-05-01 at 18:41. Reason: Add FS type
 

The Following 2 Users Say Thank You to persmule For This Useful Post:
Posts: 323 | Thanked: 1,709 times | Joined on Jul 2014
#44
New images are available for Wifi and LTE versions, no real difference to the previous ones just now with Sailfish OS 2.2.0.29 Mouhjoki
__________________
SirenSong v0.5
Like my work? buy me a beer
 

The Following 3 Users Say Thank You to r0kk3rz For This Useful Post:
Posts: 323 | Thanked: 1,709 times | Joined on Jul 2014
#45
And we also got the modem running on the LTE version yesterday

https://twitter.com/Nokius/status/1005534268444078081
__________________
SirenSong v0.5
Like my work? buy me a beer
 

The Following 6 Users Say Thank You to r0kk3rz For This Useful Post:
Posts: 9 | Thanked: 11 times | Joined on Jun 2012
#46
Originally Posted by r0kk3rz View Post
New images are available for Wifi and LTE versions, no real difference to the previous ones just now with Sailfish OS 2.2.0.29 Mouhjoki
Is it possible to upgrade from previous installation to this version via OTA upgrade?
 

The Following User Says Thank You to persmule For This Useful Post:
Posts: 323 | Thanked: 1,709 times | Joined on Jul 2014
#47
Originally Posted by persmule View Post
Is it possible to upgrade from previous installation to this version via OTA upgrade?
Yes OTA should be fine, but I've not really tested it myself.

Make sure you have the OBS repo enabled under `ssu lr`
http://repo.merproject.org/obs/nemo:...atest_armv7hl/

then do:
ssu release 2.2.0.29
zypper ref -f
version --dup
sync
reboot
__________________
SirenSong v0.5
Like my work? buy me a beer
 

The Following 4 Users Say Thank You to r0kk3rz For This Useful Post:
Posts: 9 | Thanked: 11 times | Joined on Jun 2012
#48
Thanks, and it is recommended to replace the url on the wiki page ( https://wiki.merproject.org/wiki/Ada...S_for_scorpion ) pointed to this thread with an "https" one.
 

The Following 2 Users Say Thank You to persmule For This Useful Post:
Posts: 9 | Thanked: 11 times | Joined on Jun 2012
#49
Currently I seem unable to use GPS (e.g. to get basic gps info via GPSInfo) on my scorpion_windy with sfos 2.2.0.29 installed. Does GPS-related functionalities implement in the hal, or some packages are absent? If the latter is my case, which packages are needed to get the GPS working?
 

The Following User Says Thank You to persmule For This Useful Post:
Posts: 323 | Thanked: 1,709 times | Joined on Jul 2014
#50
Originally Posted by persmule View Post
Currently I seem unable to use GPS (e.g. to get basic gps info via GPSInfo) on my scorpion_windy with sfos 2.2.0.29 installed. Does GPS-related functionalities implement in the hal, or some packages are absent? If the latter is my case, which packages are needed to get the GPS working?
I did notice this the other day, but GPS also wasn't working on the AOSP base either for me.

feel free to join #sailfishos-porters if you want some help debugging it
__________________
SirenSong v0.5
Like my work? buy me a beer
 

The Following User Says Thank You to r0kk3rz For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 10:56.