Notices


Reply
Thread Tools
stickymick's Avatar
Posts: 999 | Thanked: 797 times | Joined on Mar 2010
#11
I've been toying with the idea of modding my TOHKBD so it does slide.
I've got a couple of ideas in mind. It's just a case of finding time and the fact that TOHKBDs are not easy to come by so I have to get it pretty much right first time.
__________________
Mick has just punched the cr@p out of the "Unlike" button on the Official Nokia Facebook Page.
 

The Following 4 Users Say Thank You to stickymick For This Useful Post:
stickymick's Avatar
Posts: 999 | Thanked: 797 times | Joined on Mar 2010
#12
OK, so after having a look at how things work, I've marked out 1 possible method. It's such a simple idea too.
In the images below I've marked out for 2x slots to be cut into the back cover where 2 free running, shallow head screws will slide.
They will pass through the slots and screw into the actual keyboard below, hopefully not damaging anything inside, (maybe contact Dirk, Kimmo or Andrew to find out what's in that big space at the top of the keyboard).

Keeping the original circuitry intact should negate the need for bluetooth as it should connect through the original TOHKBD software.


__________________
Mick has just punched the cr@p out of the "Unlike" button on the Official Nokia Facebook Page.
 

The Following 10 Users Say Thank You to stickymick For This Useful Post:
stickymick's Avatar
Posts: 999 | Thanked: 797 times | Joined on Mar 2010
#13
I've spoken to Dirk on Twitter, looked at the design schematics and can't see why this shouldn't be possible. Watch this space.
__________________
Mick has just punched the cr@p out of the "Unlike" button on the Official Nokia Facebook Page.
 

The Following 4 Users Say Thank You to stickymick For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 04:11.