Active Topics

 


Reply
Thread Tools
Posts: 456 | Thanked: 1,580 times | Joined on Dec 2009
#41
Hi,

some more notes regarding things I tested with the latest build:
  • SNES works on a Nexus5x.
    I did not test anything else due to time constraints.
  • SNES and NES do not work on the Jolla Community device
    Both segfault almost immediately.
    I believe this is because the Jolla C uses armv7l, while emumaster requires at least hard float to build.
  • Interestingly, PSX works on the Jolla Community device.
    I don't know why PSX works on Jolla C while SNES and NES don't.
    Actually PSX even requires the neon instruction set.
From these results, I'd say that:
  • You should be lucky if you have an armv7hl device.
    In this case, my guess is that most things should work.
  • The Jolla C does not (well) support emumaster.
    Even though PSX seems to work, I could not get the others NES and SNES to work with a variety of CFLAGS combinations.



Cheers,

Wonko
__________________
 

The Following 5 Users Say Thank You to Wonko For This Useful Post:
kinchan's Avatar
Posts: 27 | Thanked: 57 times | Joined on May 2012 @ France
#42
hi Wonko!

And thank you for porting emumaster to SailfishOS.
I installed the latest version from your repository on my jolla. Everything works very well (SNES & psx). However I can't access the keyboard configuration menu. I have a TOHKBD, so I would like to use it! Is it possible to edit the keys directly in the emumaster.conf file?

Cheers!
__________________
"Give a man a fish and you feed him for a day. Teach a man to fish and you feed him for a lifetime."
KINproject homepage
 

The Following User Says Thank You to kinchan For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:13.