Notices
Page 88 of 139 « First 788687 88 899098 Last »
Reply
Thread Tools
ivyking is offline ivyking
2011-07-26 , 18:07
Posts: 237 | Thanked: 274 times | Joined on Jul 2010
#871
Originally Posted by RobbieThe1st View Post
I *may* be able to get it to continue booting - Preliminary testing with ivyking's 4-line "patch" only gets me "Kernel panic - attempted to kill init", so I'm obviously doing something wrong as of yet.
attached is a zip file containing my complete backupmenu folder
I had to copy these files to the MyDocs partition first, so you will have to set Backupmenu, BackupmenuLauncher, tar to be executable again.

please try these.

I am using a modified multiboot, but that has nothing to do with it imo, as multiboot is executed when /sbin/preinit is executed.

*I came across a similar issue while testing, when I did the following :
I added the lines responsible for launching maemo to the bottom of BackupmenuLauncher, and I added an option to Backupmenu and just used exit there.
this is wrong and leads to killing init and kernel panic.
is that what you did ?

the correct thing is to add nothing to Launcher, and add the lines under an option in Backupmenu.

also please note that when you continue booting maemo, and if you have boot menu, and don't have a list appear when boot menu is launched, then backup menu will be launched again unless you partially close the keypad before writing 'x' to exit backupmenu

[Edit] Sorry forgot to actually click upload! fixed .
Attached Files
File Type: zip backupmenu.zip (161.0 KB, 96 views)
Last edited by ivyking; 2011-07-26 at 18:13.
 

The Following User Says Thank You to ivyking For This Useful Post:
tuxsavvy is offline tuxsavvy
2011-07-29 , 06:23
Posts: 502 | Thanked: 366 times | Joined on Jun 2010 @ /dev/null
#872
For any archlinux users wanting mtd-utils_20090606, I have made an AUR package that will ease the installation rather than going through alternate means . More information about the AUR package including download can be found here.
 
dabangzhu123 is offline dabangzhu123
2011-07-30 , 13:45
Posts: 4 | Thanked: 1 time | Joined on Jul 2011
#873
I have to re-brush the PR1.3 and EMMC, but why every time you open the keyboard, a second later backupmenu will automatically restart? And can not be backed up and restored.
Sorry, my English is not very good.
 
RobbieThe1st is offline RobbieThe1st
2011-07-30 , 22:36
Posts: 842 | Thanked: 1,197 times | Joined on May 2010
#874
Uh... you've got something else wrong, then. BM shouldn't care about the KB-switch position
__________________
My projects: BackupMenu - OS Backup & restore | Video: Flashing your n900(LiveCD)
My devices: N770 + 8GB SD card soldered internally, N900 with 8GB SD card + Custom OC(125-950 typically).
OC freqs: 0:22,90 125:22,90 250:28,180 500:30,360 550:32,400 600:34,430 700:39,430 750:41,430 805:45,430 850:47,500 900:50,500 950:54,500 1000:58,500 1100:67,520 1150:71,520
 
dabangzhu123 is offline dabangzhu123
2011-07-31 , 02:26
Posts: 4 | Thanked: 1 time | Joined on Jul 2011
#875
Yes, I know. But I have to re-brush the ROM and EMMC, the system should be the most pure, it should not have any conflict, right?
 

The Following User Says Thank You to dabangzhu123 For This Useful Post:
RobbieThe1st is offline RobbieThe1st
2011-07-31 , 23:34
Posts: 842 | Thanked: 1,197 times | Joined on May 2010
#876
Um... "re-brush"? Do you mean "reflash"?
And no, if you flash it back to the factory image, then install BM, there should be no problems(aside from no Terminal mode, which requires kernel-power).
__________________
My projects: BackupMenu - OS Backup & restore | Video: Flashing your n900(LiveCD)
My devices: N770 + 8GB SD card soldered internally, N900 with 8GB SD card + Custom OC(125-950 typically).
OC freqs: 0:22,90 125:22,90 250:28,180 500:30,360 550:32,400 600:34,430 700:39,430 750:41,430 805:45,430 850:47,500 900:50,500 950:54,500 1000:58,500 1100:67,520 1150:71,520
 
Estel's Avatar
Estel is offline Estel
2011-08-01 , 00:47
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#877
For me, it seems as loose battery pins. Tends to break connection for a while during keyboard sliding. Try tightening them a little with needle.
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following User Says Thank You to Estel For This Useful Post:
dabangzhu123 is offline dabangzhu123
2011-08-02 , 06:49
Posts: 4 | Thanked: 1 time | Joined on Jul 2011
#878
Yes. Refresh. As it has been refreshed for the factory image, so I can not find where a problem. (The original OMAP1 kernel)
I have tried tighten battery pin a little with needle, but still did not solve the problem. Thank you.
 
Helmuth's Avatar
Helmuth is offline Helmuth
2011-08-03 , 22:51
Posts: 1,259 | Thanked: 1,341 times | Joined on Oct 2009 @ Germany
#879
Robbie, please try to apply here again: http://wiki.meego.com/Community_Offi...tended_Program

We simply need such a great solution later or sooner at the N9!
 

The Following User Says Thank You to Helmuth For This Useful Post:
Estel's Avatar
Estel is offline Estel
2011-08-05 , 01:52
Posts: 5,028 | Thanked: 8,613 times | Joined on Mar 2011
#880
No, please do not! Enough good developers were sucked out thanks to this b.u.l.l.s.h.i.t. If You really got crush on Meego, wait for CordiaTAB (also called Hacklet), please

[/off-topic off]
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
Last edited by Estel; 2011-08-05 at 02:15.
 

The Following 3 Users Say Thank You to Estel For This Useful Post:
Reply
Page 88 of 139 « First 788687 88 899098 Last »

Tags
backup, backupmenu, cssusupplement, max(useful), rescue-console, restore, system

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 06:59.

Contact Us - Home - Archive - Top