Notices

@juz
So long as you aren't too forceful, getting the faulty part out is simple. Use good quality t5 for the components, and then from memory I used a 1mm flat screwdriver to ease out the reciever. It does have some stickiness to it, and if needs be break the speaker out to protect the surrounding plastic. All the best mate...

Greendts,
I have disassembled down to the back side of the receiver quite happily previously. So all should go well. It was just the last bit popping the speaker out that I have not done yet. Sounds like it will be all good though.
Thanks Again.

oh yeah, I re-read the beginning of this thread and realised it was you that had gotten better torx. My mind isn't what it used to be, forgets things all the time. Cross fingers that your part arrives on time and smooth sailing from there.

Hello,
how did you manage to get till the receiver ?
yesterday i did try again to disassamble jolla
i can remove the first black plastic, then the metal edge, the buttons.. i did remove the screw to lift the circuit board to reach the earpiece but i do not know how to this without breaking any ground wires etc

thanks !

Hi All,

An update on the receiver front. My AUD3.90 receiver to suit Nokia Lumia 820 arrived today and the installation went perfect. So all is working now, very well. It fitted perfectly, I used a small amount of contact adhesive to replace the adhesive that Jolla used originally. I purchased this off ebay.

For the benefit of Pawel Spoon I have attached an image showing what I did. Note that I have only just enough of an idea to do the job, so these instructions are probably wrong. Use with caution, or better yet find your own way. I don't know how to attach a good quality image so see my google drive for a better copy .

Thanks again to Greendts for finding the replacement part. Saved me untold amounts of heartbreak or money. And thanks to TMO for saving another phone!

Justin.

I fear I have to unscrew mine :\

Don't be scared, it is really quite easy. Just make sure you get all the screws and ribbon connectors before trying to remove the main board to get to the receiver

yes jolla asks 50EUR for this 0.90EUR component:

https://fr.aliexpress.com/item/Ear-P...OrigTitle=true

Edit:

Received this morning and fixed this evening \o/

This also helped

https://together.jolla.com/question/...post-id-150640

You guys are the best! Following Juz's instructions and pictures, I've just fixed my receiver speaker (bought on eBay an "original Nokia 500 700 820 920 Lumia Asha 305 306 earpiece").

By the way, I didn't know my Jolla has several torx screw sizes, not only in length but in thread. I'm afraid I have "forced" some holes (my N900 antenna died because of one of those )

For the component or for the service? I am not a fan of a big markup either but let's be fair.