Active Topics
-
Paths (0)
to Maemo 7 / Leste by teroyk - 15 hrs, 54 mins ago -
Is there a section to talk about Java ME? Apps, etc. (4)
to General by teroyk - 17 hrs, 4 mins ago - more...
|
2008-09-09
, 10:32
|
|
Posts: 37 |
Thanked: 33 times |
Joined on Feb 2008
@ Ukraine, Kharkiv
|
#2
|
Some tricks 
HUB usually set the minimal share limit (e.g. 5Gb)
With a 4Gb SDHC Card it's a problem
But there is a problem decision
You must have Card with ext2 file system. or partition. (It's work only on ext2-like FS, non FAT)
Make file (on card - in sared folder) with real size 1Mb but trick size ~2Gb:
Welcome!
HUB usually set the minimal share limit (e.g. 5Gb)
With a 4Gb SDHC Card it's a problem
But there is a problem decision
You must have Card with ext2 file system. or partition. (It's work only on ext2-like FS, non FAT)
Make file (on card - in sared folder) with real size 1Mb but trick size ~2Gb:
Code:
dd if=/dev/zero of=test1 count=1 bs=1M seek=2000
Welcome!
 |
|
2008-09-09
, 10:55
|
|
Posts: 3,397 |
Thanked: 1,212 times |
Joined on Jul 2008
@ Netherlands
|
#3
|
Originally Posted by DJArty
..and you'll be booted right after an operator checked your file share. Please don't follow advices like this one. There are probably hubs which welcome you to chat if you ask nice, but if you don't ask and just share nonsense you deserve a big fat IP ban.
Some tricks
HUB usually set the minimal share limit (e.g. 5Gb)
With a 4Gb SDHC Card it's a problem
But there is a problem decision
You must have Card with ext2 file system. or partition. (It's work only on ext2-like FS, non FAT)
Make file (on card - in sared folder) with real size 1Mb but trick size ~2Gb:
Code:dd if=/dev/zero of=test1 count=1 bs=1M seek=2000
I said it many times and I say it again: the NIT is not meant for P2P purposes. Run your P2P application remotely and use SSH or Rdesktop or whatever to control it from the NIT.
__________________
Goosfraba! All text written by allnameswereout is public domain unless stated otherwise. Thank you for sharing your output!
Goosfraba! All text written by allnameswereout is public domain unless stated otherwise. Thank you for sharing your output!
|
|
2008-09-09
, 11:49
|
|
Posts: 37 |
Thanked: 33 times |
Joined on Feb 2008
@ Ukraine, Kharkiv
|
#4
|
Originally Posted by allnameswereout
Certainly, it is your choice.
.don't follow advices like this one.
It is possible even simply reshare access to a folder on the bigcomputer through Samba, NFS (Wizard Mounter).
Certainly, I with pleasure share all that I have.
But what can I do if I have magnet, and a file to me is necessary right now right here, and in hands only NIT with the small card and bigcomputer nearby is not present... Not I have set minimal share limit, but HUB. What for to me INTERNET Tablet? What to use possibilities of the Internet only under the care of a mainframe computer?
Last edited by DJArty; 2008-09-09 at 12:00.
|
|
2008-09-18
, 18:43
|
|
Posts: 3,397 |
Thanked: 1,212 times |
Joined on Jul 2008
@ Netherlands
|
#5
|
Look, if the operators are cool with it, sure, you're all set. But you should ask them first. Just doing that you described is considered rude. If you already have a computer on you can run DC on that. You could run 2 clients, one with share, one on the NIT (e.g. to chat) -- but ask the operators first. That is my point...
__________________
Goosfraba! All text written by allnameswereout is public domain unless stated otherwise. Thank you for sharing your output!
Goosfraba! All text written by allnameswereout is public domain unless stated otherwise. Thank you for sharing your output!
Like DC, DC++ but commandline only.
Dependences: libreadline5, readline-common, libxml2
1.
2.
Download microdc2.deb from attachment
http://www.internettablettalk.com/fo...1&d=1219589100
and just install with appmanager or in terminal:
Run in terminal
Last edited by DJArty; 2008-08-24 at 14:58.