Notices


Reply
Thread Tools
Posts: 12 | Thanked: 17 times | Joined on Jul 2015
#11
According to elinux.org/n900 there seems to be a problem to have roofs on mmcblk for Linux 3.16+. Found this on lkml:

The problem is still there in 3.17-rc2. 3.16 does not have the
> > problem. Messages are still similar:
> >
> > mmc0: new high speed SDHC card at address b368
> > mmcblk0: mmc0:b368 USD 7.45 GiB
> > mmcblk0: p1 p2 p3 p4
> > VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error
> > -6
> > Please append a correct "root=" boot option; here are the available
> > partitions:
> > b300 7822336 mmcblk0 driver: mmcblk
> > b301 102400 mmcblk0p1 00082434-01
> > b302 1048576 mmcblk0p2 00082434-02
> > b303 1024 mmcblk0p3 00082434-03
> > b304 6086656 mmcblk0p4 00082434-04
> > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
> > CPU: 0 PID: 1 Comm: swapper/0 Not tainted
> > 3.17.0-rc2-00368-gec0400b-dirty #83
> >
> >
> > What is going on there? Clearly partition table was parsed and
> > partitions are available; does the mention of unknown-block(0,0) mean
> > that kernel failed to parse the command line?
> >
> > I replaced "root=/dev/mmcblk0p2" with "root=b302" and have a booting
> > system.
>
>
 

The Following User Says Thank You to Eno-Desu For This Useful Post:
Posts: 12 | Thanked: 17 times | Joined on Jul 2015
#12
https://github.com/cyanogenmod/andro...e/tree/cm-11.0


https://wiki.cyanogenmod.org/w/Encore_Info
This will almost work on n900. A little configuration in the boardfile is needed and egl.cfg.
 

The Following 3 Users Say Thank You to Eno-Desu For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 18:37.