Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (0)
to General by Kalatti - 15 hrs, 58 mins ago -
Extra softwares in Sailfish using CLI, repositories, etc (117)
to SailfishOS by nieldk - 2 days, 12 hrs ago -
Firefox with Leste (6)
to Maemo 7 / Leste by teroyk - 3 days, 9 hrs ago - more...
|
2010-11-08
, 10:24
|
|
Posts: 842 |
Thanked: 1,197 times |
Joined on May 2010
|
#12
|
Yea, lets try with a Ubuntu LiveCD - That could help, but you may also have a broken USB port or cable or something.
__________________
My projects: BackupMenu - OS Backup & restore | Video: Flashing your n900(LiveCD)
My devices: N770 + 8GB SD card soldered internally, N900 with 8GB SD card + Custom OC(125-950 typically).
OC freqs: 0:22,90 125:22,90 250:28,180 500:30,360 550:32,400 600:34,430 700:39,430 750:41,430 805:45,430 850:47,500 900:50,500 950:54,500 1000:58,500 1100:67,520 1150:71,520
My projects: BackupMenu - OS Backup & restore | Video: Flashing your n900(LiveCD)
My devices: N770 + 8GB SD card soldered internally, N900 with 8GB SD card + Custom OC(125-950 typically).
OC freqs: 0:22,90 125:22,90 250:28,180 500:30,360 550:32,400 600:34,430 700:39,430 750:41,430 805:45,430 850:47,500 900:50,500 950:54,500 1000:58,500 1100:67,520 1150:71,520
|
|
2010-11-08
, 10:32
|
|
Posts: 14 |
Thanked: 10 times |
Joined on Apr 2010
|
#13
|
I had some problems to connecting in win7.
First time it failed everytime connecting in mass storage mode. I hade to reboot the phone with cabel connected to pc.
If i use a usb Hub with other devices attached it fails to.
First time it failed everytime connecting in mass storage mode. I hade to reboot the phone with cabel connected to pc.
If i use a usb Hub with other devices attached it fails to.
|
|
2010-12-31
, 02:55
|
|
Posts: 3 |
Thanked: 1 time |
Joined on Sep 2010
|
#14
|
Using Windows XP SP3 here...
I fixed the problem by updating the driver through device manager. The N900 showed up on device manager with a yellow exclamation mark on it, so I right clicked on it and picked "update driver". It went on the internet and grabbed whatever update was there and my PC then recognized the N900.
On device manger it created a new device type called Wireless Communication Devices and under that it listed Nokia BB5 ADL Loader USB Generic and Nokia BB5 ADL Loader USB Phone Parent
My dos window then showed that it had recognized the device and started the flash process.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1_PR_MR0
Sending xloader image (14 kB)...
100% (14 of 0 kB, avg. 14 kB/s)
Sending secondary image (106 kB)...
100% (106 of 0 kB, avg. 106 kB/s)
Flashing bootloader... done.
Sending cmt-2nd image (79 kB)...
100% (79 of 0 kB, avg. 79 kB/s)
Sending cmt-algo image (507 kB)...
100% (507 of 0 kB, avg. 507 kB/s)
Sending cmt-mcusw image (5826 kB)...
100% (5826 of 0 kB, avg. 5826 kB/s)
Flashing cmt-mcusw... done.
Sending kernel image (1705 kB)...
100% (1705 of 0 kB, avg. 1705 kB/s)
Flashing kernel... done.
Sending and flashing rootfs image (185728 kB)...
100% (185728 of 0 kB, avg. 185728 kB/s)
Finishing flashing... done
CMT flashed successfully
Note my N900 didn't reboot after the flashing was complete as some tutorials have stated...so i waited a bit and still no reboot. In the end I had to manually turn it on.
It also took a minute or two to reboot which seemed like an eternity and I was getting quite worried. The row of dots appeared on the screen and nothing much happened for a minute or two.
Finally it did boot *phew* and I got the screen to set the region and time zone.
I noticed that flashing the device did not erase any of my data like my pictures, sound files, videos, phone contacts, sms conversations, web browsing history, etc - which I was hoping it might do. I wanted the device to be exactly what I first got from the store, but this wasn't the case because all my data is still there.
Hope that helps.
I fixed the problem by updating the driver through device manager. The N900 showed up on device manager with a yellow exclamation mark on it, so I right clicked on it and picked "update driver". It went on the internet and grabbed whatever update was there and my PC then recognized the N900.
On device manger it created a new device type called Wireless Communication Devices and under that it listed Nokia BB5 ADL Loader USB Generic and Nokia BB5 ADL Loader USB Phone Parent
My dos window then showed that it had recognized the device and started the flash process.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1_PR_MR0
Sending xloader image (14 kB)...
100% (14 of 0 kB, avg. 14 kB/s)
Sending secondary image (106 kB)...
100% (106 of 0 kB, avg. 106 kB/s)
Flashing bootloader... done.
Sending cmt-2nd image (79 kB)...
100% (79 of 0 kB, avg. 79 kB/s)
Sending cmt-algo image (507 kB)...
100% (507 of 0 kB, avg. 507 kB/s)
Sending cmt-mcusw image (5826 kB)...
100% (5826 of 0 kB, avg. 5826 kB/s)
Flashing cmt-mcusw... done.
Sending kernel image (1705 kB)...
100% (1705 of 0 kB, avg. 1705 kB/s)
Flashing kernel... done.
Sending and flashing rootfs image (185728 kB)...
100% (185728 of 0 kB, avg. 185728 kB/s)
Finishing flashing... done
CMT flashed successfully
Note my N900 didn't reboot after the flashing was complete as some tutorials have stated...so i waited a bit and still no reboot. In the end I had to manually turn it on.
It also took a minute or two to reboot which seemed like an eternity and I was getting quite worried. The row of dots appeared on the screen and nothing much happened for a minute or two.
Finally it did boot *phew* and I got the screen to set the region and time zone.
I noticed that flashing the device did not erase any of my data like my pictures, sound files, videos, phone contacts, sms conversations, web browsing history, etc - which I was hoping it might do. I wanted the device to be exactly what I first got from the store, but this wasn't the case because all my data is still there.
Hope that helps.
|
|
2010-12-31
, 14:14
|
|
Posts: 2,102 |
Thanked: 1,937 times |
Joined on Sep 2008
@ Berlin, Germany
|
#15
|
Even flashing emmc_Vanilla will not remove all of your settings and data, because all of those setting are stored in /home and are save from rootfs and MyDocs flashable images. Wipe them manually from X-Terminal or from within the application.
|
|
2011-01-05
, 01:26
|
|
Posts: 1 |
Thanked: 0 times |
Joined on Jan 2011
|
#16
|
I had similar problem. I am using MS windows XP SP3. I could resolve in my second attempt. Went to device manager - saw the phone was connected in PC SUITE MODE. Just uninstalled that driver there. Reconnected the phone and my device was found!!!
I could successfully install the OS. I love N900!!!
I could successfully install the OS. I love N900!!!
 |
|
2011-01-05
, 02:01
|
|
Posts: 451 |
Thanked: 424 times |
Joined on Apr 2010
@ England
|
#17
|
Before today I had never experienced this problem, but both of my Arch, and a Windows 7 machine kept giving me this error.
Booting back into Arch with the cdc_phonet and phonet modules blacklisted I was able to reflash after a couple of failed attempts.
Booting back into Arch with the cdc_phonet and phonet modules blacklisted I was able to reflash after a couple of failed attempts.
|
|
2011-02-03
, 08:10
|
|
Posts: 526 |
Thanked: 99 times |
Joined on Sep 2009
|
#18
|
The best solution for this is here and use option 5
http://wiki.maemo.org/Updating_the_t..._Windows_7_x64
http://wiki.maemo.org/Updating_the_t..._Windows_7_x64
|
|
2011-02-04
, 16:29
|
|
Posts: 13 |
Thanked: 2 times |
Joined on Apr 2010
|
#19
|
i tried here with windows 7 and expected many problems.. so i decided to install ubuntu..
problem fixed, this and many others (not responding,virus...)
ubuntu lol
problem fixed, this and many others (not responding,virus...)
ubuntu lol
|
|
2011-05-07
, 00:49
|
|
Posts: 3 |
Thanked: 1 time |
Joined on Jul 2010
|
#20
|
Originally Posted by stobbsc
Thanks dude
The best solution for this is here and use option 5
http://wiki.maemo.org/Updating_the_t..._Windows_7_x64
best solution ever!!!!
2. never have errors again
3. start hating windows even more