Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (3)
to General by Kalatti - 20 hrs, 22 mins ago - more...
Haider |
2011-01-21
, 12:07
|
|
Posts: 131 |
Thanked: 104 times |
Joined on Dec 2010
|
#51
|
How to install it. When I type the first command it says cannot create mkdir. Can you explain it. I am a nooby.
 |
|
2011-01-21
, 12:48
|
|
Posts: 330 |
Thanked: 483 times |
Joined on Dec 2010
@ Norwich, UK
|
#52
|
Originally Posted by angelbratz
WPA is a bit different. Once you have the airodump window open you have 2 options.
Successfully obtained my WEP...
Now learning how to Bruteforce WPA/WPA2...
Huhuhuhuhu.....Keep up the Excellent work...
Thank youuuuu....^.^
Just to verify my steps for bruteforcing my WPA/WPA2...
sh fas.sh
i choose 3 (load)
Then 1 (Enable)
Then 2 (Scan Ap)
Then 4 (brutefoce)
Then 3 Choose Dictionary
Then i enter (test.txt)
Then I choose 2 (Specify Cap)
Then it open a New Window and close it immediately...
It brings me back to the mainmenu.. (1-5)
There is no option to inject or authenticate with client like cracking the WEP...
Did i miss something here?
^.^""
Sorry...
Also...during Deauthentication...
I should enter
(AP MAC) (MYPC MAC) INTERFACE (wlan0)
Right?
1. Wait for a client to authenticate with the AP.
2. If a client is already authenticated, use the deauthenticate option to force them to disconnect/reconnect with the AP.
When this has happened, you will get a message in the top right of the airodump window saying "WPA Handshake". And now you can bruteforce the cap file
The deauthenticate command syntax is:
AP MAC, Client, Interface, Number of Deauths
So it would be:
(AP Mac address) (Already connected client mac) wlan0 (Number of times to send deauth packet)
Originally Posted by Haider
Make sure you follow this code EXACTLY.
How to install it. When I type the first command it says cannot create mkdir. Can you explain it. I am a nooby.
Code:
mkdir /home/user/MyDocs/FAS/ cd /home/user/MyDocs/FAS/ mkdir cap mkdir diction mkdir keys tar -xzvf /home/user/MyDocs/fas.tar.gz .
__________________
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
Last edited by FRuMMaGe; 2011-01-21 at 12:56.
| The Following User Says Thank You to FRuMMaGe For This Useful Post: | ||
|
|
2011-01-21
, 13:06
|
|
Posts: 55 |
Thanked: 4 times |
Joined on Jun 2010
|
#53
|
Owh...
I get it now...So means after i select which AP to crack and after i input the:
(Ch) (Ap Mac) (filename)
I just wait or De-authenticate...correct?
So once i i see the handshake...Then i can start bruteforcing it...
ill test it right away...hehehe...
Update:
I just tested disconnecting and reconnecting my lappie...i somehow do not see the handshake notification...btw my router now using wpa/wpa2.
oh yea...and the Mac to deauthenticate...the connected mac is at the bottom of the screen rite?
Thank you...
as for the cannot mkdir..is the folder already there??? I think i got the same error last time....but at the end i check my folder..its already created...Try check if the folder is already created or not...
Instead of creating the folder from X-term you can also manually create it at the file manager right?
Last edited by angelbratz; 2011-01-21 at 13:42.
I get it now...So means after i select which AP to crack and after i input the:
(Ch) (Ap Mac) (filename)
I just wait or De-authenticate...correct?
So once i i see the handshake...Then i can start bruteforcing it...
ill test it right away...hehehe...
Update:
I just tested disconnecting and reconnecting my lappie...i somehow do not see the handshake notification...btw my router now using wpa/wpa2.
oh yea...and the Mac to deauthenticate...the connected mac is at the bottom of the screen rite?
Thank you...
as for the cannot mkdir..is the folder already there??? I think i got the same error last time....but at the end i check my folder..its already created...Try check if the folder is already created or not...
Instead of creating the folder from X-term you can also manually create it at the file manager right?
Last edited by angelbratz; 2011-01-21 at 13:42.
|
|
2011-01-21
, 13:43
|
|
Posts: 330 |
Thanked: 483 times |
Joined on Dec 2010
@ Norwich, UK
|
#54
|
Originally Posted by angelbratz
Correct
I get it now...So means after i select which AP to crack and after i input the:
(Ch) (Ap Mac) (filename)
I just wait or De-authenticate...correct?
So once i i see the handshake...Then i can start bruteforcing it...
ill test it right away...hehehe...
oh yea...and the Mac to deauthenticate...the connected mac is at the bottom of the screen rite?
Originally Posted by angelbratz
You can make the folders with file manager, but I prefer the xterm version. If you follow the commands exactly there should not be a problem.
as for the cannot mkdir..is the folder already there??? I think i got the same error last time....but at the end i check my folder..its already created...Try check if the folder is already created or not...
Instead of creating the folder from X-term you can also manually create it at the file manager right?
I have a nice queen beecon widget on my desktop for launching the script
__________________
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
| The Following User Says Thank You to FRuMMaGe For This Useful Post: | ||
|
|
2011-01-21
, 13:53
|
|
Posts: 55 |
Thanked: 4 times |
Joined on Jun 2010
|
#55
|
I suck at queenbeecon script....hahahai mainly rely on the beecon exports...Hehehehe....
I did my testing....could not see the handshake notification...or am i looking at the correct window?
I did my testing....could not see the handshake notification...or am i looking at the correct window?
|
|
2011-01-21
, 14:14
|
|
Posts: 330 |
Thanked: 483 times |
Joined on Dec 2010
@ Norwich, UK
|
#56
|
Originally Posted by angelbratz
If your font is any bigger than size 10 then you wont see it. Press Ctrl+Shift+P to take a screenshot and post it here
I suck at queenbeecon script....hahahai mainly rely on the beecon exports...Hehehehe....
I did my testing....could not see the handshake notification...or am i looking at the correct window?
__________________
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
|
|
2011-01-21
, 14:32
|
|
Posts: 55 |
Thanked: 4 times |
Joined on Jun 2010
|
#57
|
Here is my Screenshot...can i know where its gonna appear?
and when i try to bruteforce the cap...it says (0 Handshake)
then it auto close the terminal...
Last edited by angelbratz; 2011-01-21 at 14:35.
and when i try to bruteforce the cap...it says (0 Handshake)
then it auto close the terminal...
Last edited by angelbratz; 2011-01-21 at 14:35.
|
|
2011-01-21
, 14:38
|
|
Posts: 330 |
Thanked: 483 times |
Joined on Dec 2010
@ Norwich, UK
|
#58
|
Originally Posted by angelbratz
It will appear to the right of the date and time. I'll test when I get home
Here is my Screenshot...can i know where its gonna appear?
and when i try to bruteforce the cap...it says (0 Handshake)
then it auto close the terminal...
__________________
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
| The Following User Says Thank You to FRuMMaGe For This Useful Post: | ||
|
|
2011-01-21
, 14:48
|
|
Posts: 55 |
Thanked: 4 times |
Joined on Jun 2010
|
#59
|
Ohhh... i see...hmmm...maybe i missed a step somewhere...but i dont think so....lemme racall it...
1. Enter WPA Mode
2. Load Injection Driver
3. Enter Monitor Mode
4. Scan AP
5. Enter Ap Channel, Mac and Filename
6. Wait for it to handshake...(this where i waited and tested for 1 hour) Also sucessfully deauthenthicate my lappie...but i still dont see the handshake notification)
7. Select bruteforce
8. Enter Dictionary File
9. Select Cap (then the status is reading the cap files, while there is a Status (0 Handshake)
10. Throw me out at the WPA menu again...
@.@""
Thanks for all the tutorial and help....really appreciate it.... achieved something new, at least success on the WEP...now the WPA/WPA2 only...
oh yea...if you're free...can include the Widget as well on the mainpage?
^.^
1. Enter WPA Mode
2. Load Injection Driver
3. Enter Monitor Mode
4. Scan AP
5. Enter Ap Channel, Mac and Filename
6. Wait for it to handshake...(this where i waited and tested for 1 hour) Also sucessfully deauthenthicate my lappie...but i still dont see the handshake notification)
7. Select bruteforce
8. Enter Dictionary File
9. Select Cap (then the status is reading the cap files, while there is a Status (0 Handshake)
10. Throw me out at the WPA menu again...
@.@""
Thanks for all the tutorial and help....really appreciate it.... achieved something new, at least success on the WEP...now the WPA/WPA2 only...
oh yea...if you're free...can include the Widget as well on the mainpage?
^.^
|
|
2011-01-21
, 15:06
|
|
Posts: 330 |
Thanked: 483 times |
Joined on Dec 2010
@ Norwich, UK
|
#60
|
Originally Posted by angelbratz
Those commands are correct. I'll test when I get home. For the widget, open a new beecon widget and click the "advanced" button, then scroll down to the bottom text box and paste the following code:
Ohhh... i see...hmmm...maybe i missed a step somewhere...but i dont think so....lemme racall it...
1. Enter WPA Mode
2. Load Injection Driver
3. Enter Monitor Mode
4. Scan AP
5. Enter Ap Channel, Mac and Filename
6. Wait for it to handshake...(this where i waited and tested for 1 hour) Also sucessfully deauthenthicate my lappie...but i still dont see the handshake notification)
7. Select bruteforce
8. Enter Dictionary File
9. Select Cap (then the status is reading the cap files, while there is a Status (0 Handshake)
10. Throw me out at the WPA menu again...
@.@""
Thanks for all the tutorial and help....really appreciate it.... achieved something new, at least success on the WEP...now the WPA/WPA2 only...
oh yea...if you're free...can include the Widget as well on the mainpage?
^.^
Code:
[queen-beecon-header] version=1.000000 checksum=2788276 [queen-beecon-exported-instance] widgetType=1 widgetVisible=1 operationalStatus=0 hideCanvas=false hideClickCanvas=false snippetBgRGB=0 snippetExtBgRGB=#627500000000 beecon_lt0_ImgZoom=0 beecon_lt0_BgRGB=2 beecon_lt0_ExtBgRGB=#64a500000000 beecon_lt0_ImgFilename=queen-beecon-appok.png beecon_eq0_ImgZoom=0 beecon_eq0_BgRGB=3 beecon_eq0_ExtBgRGB=#65bd00000000 beecon_eq0_ImgFilename=queen-beecon-appok.png beecon_eq1_ImgZoom=0 beecon_eq1_BgRGB=4 beecon_eq1_ExtBgRGB=#ffffffff0000 beecon_eq1_ImgFilename=queen-beecon-appwrn.png beecon_ge2_ImgZoom=0 beecon_ge2_BgRGB=5 beecon_ge2_ExtBgRGB=#ffff00000000 beecon_ge2_ImgFilename=queen-beecon-apperr.png beecon_idxge2_ImgZoom=0 beecon_idxge2_BgRGB=11 beecon_idxge2_ExtBgRGB=#0000ffffffff beecon_idxge2_ImgFilename=queen-beecon-index.png widWidth=147.70642201834863 widHeight=64.264705882352942 instanceTitle=Aircrack instanceCmd=osso-xterm -e "sh /home/user/MyDocs/FAS/fas.sh" rememberMe= cmdImgFilename=queen-beecon-appok.png cmdImgAngle=0 cmdImgZoom=11 cmdFgRGB=1 cmdExtFgRGB=#ffffffffffff cmdTextAngle=0 cmdVisibilityPosition=5 cmdImgVisibilityPosition=5 cmdJustify=0 cmdExtFont=Nokia Sans bold italic 18 cmdFontName=3 cmdFontSize=12 resImgFilename=queen-beecon-appok.png resImgAngle=0 resImgZoom=0 resFgRGB=1 resExtFgRGB=#ffffffffffff resTextAngle=0 resVisibilityPosition=0 resImgVisibilityPosition=5 resJustify=0 resExtFont=Nokia Sans bold 12 resFontName=2 resFontSize=12 progressAnimationFrames=4 progressAnimationTimer=0 progressAnimationPos=4 progressAnimationAtClickXY=false progressAnimationBasename=queen-beecon-progress updOnStartup=false updOnClick=true updOnDesktop=false updOnSight=false delayIndex=0 customIntervalSecs=0 updNeworkPolicy=0 updOnDBUS=0 updOnDBUSBus=0 updOnDBUSMatchRule=
__________________
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
OMNOM: Pacman-like game now in extras-devel
fAircrack (Aircrack GUI): Point-and-click pwnage for your N900
Now with John the Ripper integration
| The Following User Says Thank You to FRuMMaGe For This Useful Post: | ||
 |
| Tags |
| crack it, frummage rocks!, noobparty |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 21:25.