Hola!

I was recently just playing around with the N9tweaks mod, when I had to reboot. And after that it started until I came to the pin code screen, then it just start rebooting itself until its back on the pin code screen, and it does this over and over again. I have really NO idea what to do!

(Yes, I have been searching around, but I only found guides to n900)

Need fast answers!

Please guys, need help!

I found a site that said i need to flash it, but i cant since it wont let me go any further than the pin code, so I cant choose sync or massstorage. So when in cmd it isnt detected...

IIRC, the phone shouldn't be on for flashing. Just download the maemo flasher, get it all ready, and plug the N9 in. It should flash before anything comes up.

This might help.
http://forum.meego.com/showthread.ph...t=flash&page=5

Thanks for the reply! I tried it out, but couldn't get it to work. My phone doesn't get recognized, so it only says "not found, waiting..."

Now, when I start the phone it says
"Device not working properly
try updating the device software with
Nokia Software Updater. If the problem
persist, contact the nearest Nokia Care
point.

Software problem (xsession/mthome):
too many reboots"

I had the same issue. I flashed it alright. Just run flasher, , then plug N9 in switched off, then keep toggling power until it detects the device.

Now we know that the phone does not like to reboot too often when stucked in the reboot-loop state.

This appened to me recently and fortunately, I stopped this loop by a long press on the on/off key.

Finally, I used the Flasher and Navifirm to recover the N9.