Active Topics

 


Reply
Thread Tools
tangent's Avatar
Posts: 87 | Thanked: 124 times | Joined on Apr 2012 @ Finland
#1
Hi, where I could find compatible smt/smd micro USB connector for Jolla Tablet? For reference here is JTablet's original connector:



Resoldering this will be a fun part with hot air soldering station
__________________

Jolla Phone 16GB (2nd in use).
Jolla Tablet 64GB (repaired).

3D modelling & printing.
CAD/CAM amateur.
Prusa i3 3D printer (Max Micron)
"Smith: Mr. Anderson, welcome back.
We missed you ."

 

The Following 3 Users Say Thank You to tangent For This Useful Post:
pichlo's Avatar
Posts: 6,445 | Thanked: 20,981 times | Joined on Sep 2012 @ UK
#2
Silly question but what is wrong with this one? I appreciate that it may have fallen off but the connector itself looks fine (though I have not seen the other side, is that where the problem is?). It is the PCB I worry about.

Try an electronic components shop. I do not know about such shops in Finland; here in the UK I would go to Maplin. Failing that, there is always eBay.
__________________
Русский военный корабль, иди нахуй!
 

The Following 3 Users Say Thank You to pichlo For This Useful Post:
coderus's Avatar
Posts: 6,436 | Thanked: 12,699 times | Joined on Nov 2011 @ Ängelholm, Sweden
#3
well, i have similar problem with mine, it just loosing connection every time. but i didnt found a replacement just yet. I jammed connector with tools, and it working more reliable now, but still looking for proper solution!
__________________
Telegram | Openrepos | GitHub | Revolut donations
 

The Following 5 Users Say Thank You to coderus For This Useful Post:
mrsellout's Avatar
Posts: 889 | Thanked: 2,087 times | Joined on Sep 2010 @ Manchester
#4
I've had issues with the original Jolla phone and tablet. I've found using a cable that has connector with a tight fit works. Ie. often some connectors can wiggle about, and those won't charge the device.
 

The Following 5 Users Say Thank You to mrsellout For This Useful Post:
tangent's Avatar
Posts: 87 | Thanked: 124 times | Joined on Apr 2012 @ Finland
#5
@pichlo That is not a silly question at all. You made me to start question why I soldered out the connector and were there really reason to do so. My tablet were not charging properly, in specific position of male connector, device would fully charge. Otherwise battery would drain despite OS charging icon.
PCB is OK.
So I felt stupid while I read @mrsellout comment. Though I did try before multiple USB cables but I did not found enough tight one.

So my logic replied: replace the damn connector.

Have to point there is not much room for working with a soldering tip as other components are too close.
I have to wait for parts and solder paste to arrive from Ebay sellers so I can do my repair round 2.
Thanks for replying
__________________

Jolla Phone 16GB (2nd in use).
Jolla Tablet 64GB (repaired).

3D modelling & printing.
CAD/CAM amateur.
Prusa i3 3D printer (Max Micron)
"Smith: Mr. Anderson, welcome back.
We missed you ."

 

The Following 5 Users Say Thank You to tangent For This Useful Post:
chenliangchen's Avatar
Posts: 1,478 | Thanked: 9,871 times | Joined on Dec 2008 @ Shanghai / London
#6
As a coincidence, I do know the design house of Jolla tablet. I might be able to get a few components for free. But it won't be very quick...
 

The Following 8 Users Say Thank You to chenliangchen For This Useful Post:
tangent's Avatar
Posts: 87 | Thanked: 124 times | Joined on Apr 2012 @ Finland
#7
Update and news of success. I got new display from TMO member and I did my dyi micro USB repair. It is not pretty result but I'm happy that my Jolla Tablet works again Though I have to reopen it again as I just noticed lack of OS recognizing SD card. Fault lies in
very annoying microsd connector which were not well enough inserted.


https://imagebin.ca/v/3HG2vJjDWW1S

I used http://http://www.ebay.com/itm/10Pcs...-/182383293629 but I think if you bend it properly it will fit.

Before 2 hard solder rounds:


https://imagebin.ca/v/3HG1GHkNmm4X
__________________

Jolla Phone 16GB (2nd in use).
Jolla Tablet 64GB (repaired).

3D modelling & printing.
CAD/CAM amateur.
Prusa i3 3D printer (Max Micron)
"Smith: Mr. Anderson, welcome back.
We missed you ."


Last edited by tangent; 2017-03-29 at 18:51. Reason: Fixed connector URL
 

The Following 3 Users Say Thank You to tangent For This Useful Post:
Posts: 803 | Thanked: 1,585 times | Joined on Aug 2014
#8
Originally Posted by tangent View Post
I used http://www.ebay.com/itm/10Pcs-Micro-USB-Type-B-Female-5Pin-Socket-4Legs-SMT-SMD-Soldering-Connectors-0-8-/182383293629 but I think if you bend it properly it will fit.
Link won't open upon Mac Safari so try:http://www.ebay.com/itm/10Pcs-Micro-...-/182383293629
 

The Following 2 Users Say Thank You to aspergerguy For This Useful Post:
Reply

Tags
jolla tablet, micro-usb

Thread Tools

 
Forum Jump


All times are GMT. The time now is 10:00.