thanks lazart. i flashed my device without usb port by this way.
thanks for information.

Please could somebody advise the which post has the definative instructions on how to reflash without using the usb port but by using the pads on the motherboard.

many thanks

Nig451964

Hi All,

It looks like N900 has given us more problems than easy usage of the mobile as a normal mobile. I am also a victim of the Nokia Care irresponsibility about Nokia product.

It looks like the Nokia Care guys cannot repair their product with confidence, but the customers do!!! Strange, isn’t it? That’s something shocking because Nokia technicians should be considering the option of going back to the school days and learn how to repair the product and come back or fire them and get the talents in.

My mobile was not booting up due to the fact that the power kernel was uninstalled by mistake. I explained the case with the Nokia care guys and I told them I am unable to flash it because I am using Windows 7 Home Premium 64 bit OS in my laptop and it is not recognizing the USB device for flashing. I know that we can flash it with Windows XP without any difficulty, which I did earlier. Also it is possible with same OS in XP compatibility mode. I didn’t want to install an XP or moving it to compatibility mode for just flashing my N900; rather I prefer paying some amount and getting it done from Nokia Care. To my surprise the technician told me that it is very difficult to flash and there is no guarantee that the device will work properly after flashing it. He gave me a 50-50 chance. I told him that I did flash my device earlier and I can give you 100% guarantee that the device will work absolutely fine after flashing it.

I took my mobile back and flashed it in my friend’s system with XP OS and it was working 100% fine.
I feel sorry for this Nokia Care guys. They do nothing but show off as if they are up with ‘it’s not our responsibility to repair YOUR device, if you want me to repair pay me half of the actual device cost.’

Regards,
Jiju Joseph.

This is someone that clearly doesn't understand the N900.
There unlikely to mess with an obsolete product usless they have to.

I'd of tried this first.
This has nothing to do with this topic BTW.
If you read the reflashing wiki you will find Window 7 can have compatiblity issue especially if 64 bit.
Your USB doesn't sound broken.

Hi Sixwheeledbeast, I was actually following the posts of "PipBoyBSOD" and I felt sharing my experience with the Nokia Care.

Yes, as you said the person was not much exposed to N900, which I also felt from the reply I received from him.

For the second point, yes, I have gone through the wiki and I am aware that we have work around for windows 7 64 bit, which I didn't want to do because it is so easy to flash in XP and hardly takes 2-3 min time. My USB isn't broken.

Regards,
Jiju Joseph.

Hi,

My N900 was in charging and unfortunatly he fell down and the usb connecter became totaly loose.

So I opened the phone and I took some pictures.

Can you tell me if you think this is repairable or you think I have to replace the mainboard ?





thank you
Thib.

Hi. About half year ago I faced with a similar accident.
Let me to explain my opinion. According to Your photo, the contact fields on the motherboard remain undamaged, except massive ground one.
I think You can reuse the old detached connector for your soldering work.
I had used an soldering iron with some sharpened copper wire coiled around (wire thickness around 1mm ). To solder the thin contacts You must be very accurate and use some magnification glass and liquid flux.
Useful links:
How to reattach the ground.
http://talk.maemo.org/showthread.php?t=75920
Good luck!

I would use new USB port, with little longer pins - it's easier to solder than old one, so less risk of destroying pads during first attempt.

/Estel