Reply
Thread Tools
Posts: 191 | Thanked: 271 times | Joined on Mar 2015 @ Germany
#1
Good morning,

after i update the Aigo Tablet to 3.0.0.8 there ist a problem
with WIFI after reboot. The tablet can't connect to the safed WIFI.
I have to delete the setting, and create a new one.
Then is everything fine, still a new reboot.
The tablet creates random MAC Adresses includ. random MAC Hardware-Adresses.
I checked with
Code:
dmesg | grep wlan0
I also find a workaround on jolla together com
See here :
https://together.jolla.com/question/...nt-static-mac/
But this dont solve my problem..
I posted the problem also here:
https://together.jolla.com/question/...em-30111-3008/

I hope somebody can give me advice for a solution...
 

The Following 2 Users Say Thank You to monkeyisland For This Useful Post:
Posts: 106 | Thanked: 372 times | Joined on Jan 2012
#2
The solution in the link works in 70% of my Aigo boots (= keeps real MAC address as I introduced it in service file). In 30% fake MAC address is set, just as without the workaround.
 

The Following 2 Users Say Thank You to Heik For This Useful Post:
Posts: 191 | Thanked: 271 times | Joined on Mar 2015 @ Germany
#3
okay real mac address.
changes sometimes too...
i test it
 

The Following User Says Thank You to monkeyisland For This Useful Post:
Posts: 191 | Thanked: 271 times | Joined on Mar 2015 @ Germany
#4
so i bricked the tablet after i would reset to 2.2.0.29
so i make recovery mode.
and do update "orgie"
 

The Following User Says Thank You to monkeyisland For This Useful Post:
Posts: 191 | Thanked: 271 times | Joined on Mar 2015 @ Germany
#5
so i managed update to 2.2.0.29 and retried the script from

https://together.jolla.com/question/...nt-static-mac/

Gives me after reboot followd error :

Code:
[root@Sailfish nemo]# systemctl status changemac@wlan0 -l
● changemac@wlan0.service - Change MAC adress
   Loaded: loaded (/etc/systemd/system/changemac@.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Wed 2019-01-23 17:02:43 CET; 57s ago
  Process: 678 ExecStart=/sbin/ip link set dev %i up (code=exited, status=2)
  Process: 657 ExecStart=/sbin/ip link set dev %i address 00:09:4c:ab:b9:0f (code=exited, status=0/SUCCESS)
 Main PID: 678 (code=exited, status=2)

Jan 23 17:02:40 Sailfish systemd[1]: Starting Change MAC adress...
Jan 23 17:02:43 Sailfish ip[678]: RTNETLINK answers: Operation not permitted
Jan 23 17:02:43 Sailfish systemd[1]: changemac@wlan0.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Jan 23 17:02:43 Sailfish systemd[1]: Failed to start Change MAC adress.
 

The Following User Says Thank You to monkeyisland For This Useful Post:
Reply

Tags
aigo x86, tablet


 
Forum Jump


All times are GMT. The time now is 14:45.