Notices


Reply
Thread Tools
Posts: 70 | Thanked: 90 times | Joined on Feb 2015
#1921
Originally Posted by alfmar View Post
My home wifi AP uses channel #13 and SailfishX has no problems connecting. The command iw phy phy0 info on SailfishX says that only 2484 MHz (channel 14) is actually "disabled" (because of the "global" and "Italy" regulatory domains; AFAIK channel 14 is only available in "Japan" regulations), and 5 GHz channels 36 to 140 (5.18 to 5.7 GHz) are also available.

In the "valid interfaces combinations" it clearly shows that "AP" and "Managed" are separate features, thus the hardware does not support being both an access point and a client at the same time.

Using the command iw dev wlan0 link on SailfishX I can see it is now using the channel 13 (frequency 2472 MHz) at 72 MBit/s speed.
Thank you for the information.

Running iw phy phy0 info gives:

Code:
	Band 1: 
[. . .]
			Frequencies:
			* 2412 MHz [1] (20.0 dBm)
			* 2417 MHz [2] (20.0 dBm)
			* 2422 MHz [3] (20.0 dBm)
			* 2427 MHz [4] (20.0 dBm)
			* 2432 MHz [5] (20.0 dBm)
			* 2437 MHz [6] (20.0 dBm)
			* 2442 MHz [7] (20.0 dBm)
			* 2447 MHz [8] (20.0 dBm)
			* 2452 MHz [9] (20.0 dBm)
			* 2457 MHz [10] (20.0 dBm)
			* 2462 MHz [11] (20.0 dBm)
			* 2467 MHz [12] (disabled)
			* 2472 MHz [13] (disabled)
			* 2484 MHz [14] (disabled)
Is there any way to enable channel 12 and 13? The firmware flashed to bring the device up to 34.3 version was the Central Europe 1 version, so channel 12 and 13 should not be restricted in those regions, and yet it is. Or does Sailfish restrict it based on the timezone or IMSI?

iw reg set [2 letter country code, eg BE, DK, RU, AU, etc] works but does not survive reboot and it changes back to the original settings.

Further testing seems to show that dead SIMs from a variety of countries do not change the regulation setting, while live SIMs do, and the reg setting is changed to the country of the connected network. One wonders what happens on the Xperia dual-SIM version if one is using two different SIMs in a border area, eg, Uzbekistan (1 - 11) and Kazakhstan (1 - 13).

Last edited by oenone; Today at 16:25.
 

The Following User Says Thank You to oenone For This Useful Post:
Posts: 155 | Thanked: 517 times | Joined on Sep 2009 @ Hampshire, UK
#1922
I just realised my X has been quiet all day despite emails arriving...

A quick check shows no sound output at all. Checked volume in settings, ambiences and from the volume key.

I saw this previously on the community build, but this is the first time it's happened since the official build arrived.

I use sailcron to switch to a silent ambience overnight and back to a noisy one in the morning. It certainly switched back to 'noisy', and the 'muted' icon wasn't shown.

Back to normal after a reboot.

Next time I will check the phone audio, and anything else I can think of. Anyone had anything similar?
 

The Following 3 Users Say Thank You to epninety For This Useful Post:
Posts: 76 | Thanked: 319 times | Joined on Mar 2010 @ southern Italy
#1923
Hmm... this is too funny to not to mention it here.

After exporting contacts using vcardconverter, I also exported the entire database of calls and SMS messages from old Jolla phone (now without SIM) to Xperia X.

First, export message groups and phone calls lists to a binary file: log in via ssh on Jolla and execute:
Code:
commhistory-tool export -groups -calls mystuff
then move that binary file to Xperia X and execute:
[code]
commhistory-tool import ./mystuff
[code]
(you can safely ignore the bunch of warnings).

and everything gets in place and sorted by date, no UTF8 characters lost, added to the already existing recent calls and SMS text messages in its database.
__________________
 

The Following User Says Thank You to alfmar For This Useful Post:
Reply

Tags
sailfish os, sony xperia x

Thread Tools

 
Forum Jump


All times are GMT. The time now is 20:19.