Active Topics

 


Reply
Thread Tools
Posts: 44 | Thanked: 25 times | Joined on May 2012 @ Karhula, Finland
#1
I cannot update my Jolla from 1.0.2.5 to 1.0.7.16 nor to 1.0.7.18. Update downloads well and install looks very solid until phone goes off when update is about to reach 100%. After that I'm unable to boot the device at all. I tried Recovery with option 5, but still nothing.

Recovery + option 1 works, though I still can't update the software to 1.0.7.16.

By the way what are the usable CPU governors in Jolla?

Last edited by weedm8; 2014-06-27 at 12:58.
 
Posts: 44 | Thanked: 25 times | Joined on May 2012 @ Karhula, Finland
#2
Just like this, but all the time!

https://together.jolla.com/question/...-after-update/
 
Posts: 44 | Thanked: 25 times | Joined on May 2012 @ Karhula, Finland
#3
Fixed it by using Telnet recovery's option 5 and after that the option 1. Then fresh and brand new Jolla account, didn't install anything but updates.
 

The Following User Says Thank You to weedm8 For This Useful Post:
Reply

Tags
brick, crash, stuck, update

Thread Tools

 
Forum Jump


All times are GMT. The time now is 02:34.