Page 11 of 28 « First 910 11 121321 Last »
Reply
Thread Tools
aspergerguy is offline aspergerguy
2020-05-15 , 17:12
Posts: 803 | Thanked: 1,585 times | Joined on Aug 2014
#101
Just wanted to say many thanks to rinigus as installed Sailfish OS 3.3.0.16 to XZ2 Compact H8324 Dual Sim today for first time and no problem with USB tether to Mac OSX Catalina 10.15.4. As this device had been in storage for a while had to update to 52.0.A.11.32 being last available Pie update before unlocking bootloader.

Unlocked bootloader via Mac and for once there was no output
in terminal similar to:
HTML Code:
OKAY [ 1.716s]
finished. total time: 1.720s
however upon removing USB C from device it rebooted into normal device unlocked screen and all well to proceed:
HTML Code:
iMac:Sailfish_OS-testing-20200512-3.3.0.16-h8324-0.2.0.2 adrian$ bash ./flash.sh
Detected Mac OS X - Version: 10 15 4-
Searching device to flash..
Found 1 devices: BH90065YGY 
Fastboot command: fastboot -s BH90065YGY  
Flashing boot partition..
Sending 'boot_a' (20220 KB)                        OKAY [  0.435s]
Writing 'boot_a'                                   OKAY [  0.427s]
Finished. Total time: 0.881s
Flashing dtbo partition..
Sending 'dtbo' (8192 KB)                           OKAY [  0.174s]
Writing 'dtbo'                                     OKAY [  0.166s]
Finished. Total time: 0.354s
Flashing userdata partition..
Sending sparse 'userdata' 1/3 (515296 KB)          OKAY [ 10.867s]
Writing 'userdata'                                 OKAY [  0.001s]
Sending sparse 'userdata' 2/3 (493226 KB)          OKAY [ 13.679s]
Writing 'userdata'                                 OKAY [  0.001s]
Sending sparse 'userdata' 3/3 (373442 KB)          OKAY [ 12.449s]
Writing 'userdata'                                 OKAY [  0.001s]
Finished. Total time: 37.040s
Flashing system_b partition..
Sending sparse 'system_b' 1/2 (524284 KB)          OKAY [ 11.008s]
Writing 'system_b'                                 OKAY [  0.001s]
Sending sparse 'system_b' 2/2 (69772 KB)           OKAY [ 17.399s]
Writing 'system_b'                                 OKAY [  0.001s]
Finished. Total time: 87.130s
Flashing vendor_a partition..
Sending 'vendor_a' (376 KB)                        OKAY [  0.018s]
Writing 'vendor_a'                                 OKAY [  0.001s]
Finished. Total time: 1.955s
Flashing vendor_b partition..
Sending 'vendor_b' (376 KB)                        OKAY [  0.018s]
Writing 'vendor_b'                                 OKAY [  0.001s]
Finished. Total time: 70.451s
Flashing oem partition..
Sending 'oem_a' (194436 KB)                        OKAY [  4.090s]
Writing 'oem_a'                                    OKAY [  3.925s]
Finished. Total time: 78.295s
Flashing vbmeta partition...
Sending 'vbmeta' (4 KB)                            OKAY [  0.009s]
Writing 'vbmeta'                                   OKAY [  0.001s]
Finished. Total time: 0.022s

Flashing completed.

Remove the USB cable and bootup the device by pressing powerkey.
Attached Images
 
Last edited by aspergerguy; 2020-05-16 at 11:00. Reason: Addition
 

The Following 5 Users Say Thank You to aspergerguy For This Useful Post:
rinigus is offline rinigus
2020-05-20 , 17:35
Posts: 1,414 | Thanked: 7,547 times | Joined on Aug 2016 @ Estonia
#102
Host of sensors just got supported on Sony Xperia Tama devices. All you have to do, is to run

zypper ref
zypper up

as root. I am not going to make separate images with it, just use OTA as described above.

Added sensors are:

- fixed compass using geo rotation vector provided by Android layer
- pressure
- step counter
- pickup gesture

See https://github.com/sailfishos-sony-tama/main#tips on how to enable/use step counter and pickup gesture.
 

The Following 7 Users Say Thank You to rinigus For This Useful Post:
atlochowski is offline atlochowski
2020-05-21 , 18:32
Posts: 207 | Thanked: 759 times | Joined on Dec 2014 @ Poland
#103
I just testing my XZ2c under Android and:

"Pickup gesture switches on the screen when you pickup the phone and allows you to avoid pressing a power button. It may require relatively faster movement, try with the different movement patterns if it does not work."

It's similar under Android. Usually, faster movement is required.
I think it's not an additional sensor but this function uses accelerometer and proximity sensor. So if you cover proximity sensor or it's dirty then this function has problems with working.
 

The Following 2 Users Say Thank You to atlochowski For This Useful Post:
rinigus is offline rinigus
2020-05-22 , 17:46
Posts: 1,414 | Thanked: 7,547 times | Joined on Aug 2016 @ Estonia
#104
With the latest release: is it just me or is the haptic feedback weaker now? Not that I have changed anything regarding it as far as I can tell...
 

The Following User Says Thank You to rinigus For This Useful Post:
ljo is offline ljo
2020-05-23 , 09:18
Posts: 102 | Thanked: 187 times | Joined on Jan 2010
#105
Originally Posted by rinigus View Post
With the latest release: is it just me or is the haptic feedback weaker now? Not that I have changed anything regarding it as far as I can tell...
@rinigus, I reacted the same way, but discarded my impression as local variance. But if you also feel it ...
 

The Following User Says Thank You to ljo For This Useful Post:
pagis is offline pagis
2020-05-23 , 13:42
Posts: 233 | Thanked: 532 times | Joined on Sep 2011
#106
Originally Posted by rinigus View Post
With the latest release: is it just me or is the haptic feedback weaker now? Not that I have changed anything regarding it as far as I can tell...
I have not noticed any difference on XZ3
 
ljo is offline ljo
2020-05-23 , 16:17
Posts: 102 | Thanked: 187 times | Joined on Jan 2010
#107
@pagis, I am on xz3 too. Did you test terminal keyboard?
My device is unfortunately at home while I am on my first travel since 6 weeks to visit my first grandchild (now 3 weeks old). So I cannot give better test support until tomorrow evening.
 
pagis is offline pagis
2020-05-23 , 21:25
Posts: 233 | Thanked: 532 times | Joined on Sep 2011
#108
Originally Posted by ljo View Post
@pagis, I am on xz3 too. Did you test terminal keyboard?
same as before i guess, the terminal keyboard in general is bad, the curved edges of the screen and the zcreen protector i have makes it even worse. toeTerm app has a lot better keyboard.
 

The Following User Says Thank You to pagis For This Useful Post:
rinigus is offline rinigus
2020-06-05 , 19:16
Posts: 1,414 | Thanked: 7,547 times | Joined on Aug 2016 @ Estonia
#109
Under initiative and drive of @piggz, we managed to add fingerprint support for community devices.

For Sony Tama, instructions are at https://github.com/sailfishos-sony-t...rprint-support .

For brave ones, try to reproduce issue https://github.com/piggz/sailfish-fp...nity/issues/10
 

The Following 8 Users Say Thank You to rinigus For This Useful Post:
pagis is offline pagis
2020-06-09 , 16:20
Posts: 233 | Thanked: 532 times | Joined on Sep 2011
#110
[QUOTE=rinigus;1567857]Under initiative and drive of @piggz, we managed to add fingerprint support for community devices.

For Sony Tama, instructions are at https://github.com/sailfishos-sony-t...rprint-support .

I cannot add a fingerprint on XZ3,
fingerprint app status shows:

Code:
Connection: Disconnected
State:Unknown:DBus interface invalid
 

The Following 2 Users Say Thank You to pagis For This Useful Post:
Reply
Page 11 of 28 « First 910 11 121321 Last »

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 10:56.

Contact Us - Home - Archive - Top