i think you can try to joint in n900 group on facebook. i ever saw they keep those important files there.

https://www.facebook.com/groups/roverlounge/files/

hi,,

after done my hard reset to N900 i got the mentioned error... please provide the resolution.

Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.9+0m5
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
Using flashing protocol Mk II.

C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.
VANILLA_PR_EMMC_MR0_ARM.bin -f
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
Using flashing protocol Mk II.

C:\Program Files\maemo\flasher-3.5>

when i am doing the 2nd step. i am getting this . please do the need ful. my nokia is not starting up...

C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.
VANILLA_PR_EMMC_MR0_ARM.bin -f
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
[init 20 % 32768 / 255947 kB 0 kB/s]
C:\Program Files\maemo\flasher-3.5>flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANI
LLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
[init 20 % 32768 / 255947 kB 0 kB/s]
C:\Program Files\maemo\flasher-3.5>

Sure the links are mostly dead on the Wikis, but the instructions are still ample and detailed. If you guys have a x64 bit Windows you will have to download libusb-win32 and install N900's Update Mode drivers through it.

I think since we have 0xFFFF, it should also be ported to all other OSes or else I don't really see much use of it.