Notices


Reply
Thread Tools
Posts: 300 | Thanked: 1,631 times | Joined on Jul 2014
#41
Originally Posted by persmule View Post
Hi all.
I just installed the sfos build on a scorpion_windy device, But I have noticed that it hangs when booting with a MicroSD card inserted (The LED will die out after going white), and boots successfully without one.
Yes Ive noticed this as well with my latest build, can I get some details about your sd card?

What size and File system is it?
__________________
SirenSong v0.5
Like my work? buy me a beer
 

The Following User Says Thank You to r0kk3rz For This Useful Post:
Posts: 5 | Thanked: 6 times | Joined on Jun 2012
#42
Originally Posted by r0kk3rz View Post
Yes Ive noticed this as well with my latest build, can I get some details about your sd card?

What size and File system is it?
# fdisk -l /dev/mmcblk1
Disk /dev/mmcblk1: 119.1 GiB, 127865454592 bytes, 249737216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x5a420b21

Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 32768 249737215 249704448 119.1G 83 Linux

The FS type of /dev/mmcblk1p1 is ext4, and the whole content of the card was cloned (via dd-ing the mbr and e2mage-ing the partition) from a nearly identical card inserted on my Sailfish X phone.

Besides, I frequently see the following complaints in the system journal:
Code:
kernel: mmc1: mmc_set_auto_bkops: error in setting auto bkops to 1 (-74)
kernel: mmc1: mmc_init_card: Failed to enable auto-bkops: err: -74

Last edited by persmule; 2018-04-29 at 16:47. Reason: Add FS type
 

The Following 2 Users Say Thank You to persmule For This Useful Post:
Posts: 5 | Thanked: 6 times | Joined on Jun 2012
#43
If another card with the following content in installed, the system can boot successfully:

# fdisk -l /dev/mmcblk1
Disk /dev/mmcblk1: 59.5 GiB, 63864569856 bytes, 124735488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x72b82eac

Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 2048 124735487 124733440 59.5G 83 Linux

The FS type of /dev/mmcblk1p1 is also ext4.

Last edited by persmule; 2018-05-01 at 18:41. Reason: Add FS type
 

The Following 2 Users Say Thank You to persmule For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:01.