Reply
Thread Tools
lorenzo's Avatar
Posts: 491 | Thanked: 299 times | Joined on Jul 2012 @ Pordenone IT
#1
my N9 went on boot loop mysteriously some days ago
did't installed new apps, no system files edits
terminal log
Code:
flasher -f -F DFL61_HARMATTAN_40.2012.21-3.232.05.2_PR_LEGACY_232_ARM_RM-696_PRD_signed.bin -R
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 009.
Device identifier: 357923041420508 (SN: N/A)
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_480
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 20891 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 010.
Device identifier: 357923041420508 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.232.05.2_PR_232
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 62 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init         0 %       0 /       0 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init         0 %       1 /       1 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1349781588)
[Pipe   0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images
now, i enabled r&d mode
Code:
 flasher --enable-rd-mode --set-rd-flags=no-lifeguard-reset
the phone boots but all contacts/conversations/accounts are gone
i can see my pics
missings items:
-keyboard
-status bar
-internet connection (both wifi & 3G)
-no popup windows (eg "enable internet connection?")
-no bluetooth (i can enable it from settings but can't see new devices nor asking association)
-can't sync to another phone (i suppose BT related issue)
-can't do a backup (it starts but doesn't save anything, maybe cause i can't insert a name)

i can ssh only through usb but
Code:
 ssh developer@192.168.2.15
doesn't give any output

any help is appreciated, i would also recover data (at least contacts)
thank you, Lorenzo
Attached Images
   

Last edited by lorenzo; 2014-12-13 at 15:43.
 
Posts: 290 | Thanked: 385 times | Joined on Jan 2012 @ Madrid, Spain
#2
Hi.
Why did you use r&d mode in the first place?
Was it to recover your contacts?
Regards.
 
lorenzo's Avatar
Posts: 491 | Thanked: 299 times | Joined on Jul 2012 @ Pordenone IT
#3
tbh, it's not mine: a friend asked me if i could do something so i tried to recover what everything i could so yes, i tried r&d to make a backup

by the way, i tried again to ssh and now works: what can i do now to get the contacts?
thanks

oh, and what about flash error? what happened?
i see that's not the right image, but on the sim tray there's 059L5H1 and the corresponding fw on mrcrab is that one http://www.mrcrab.net/Nokia-Product-...ctCode=059L5H1

Last edited by lorenzo; 2014-12-13 at 16:06.
 
Posts: 12 | Thanked: 6 times | Joined on Jun 2014
#4
is apparently wrong image but you can also take it as downgrade, get yourself a higher version number and a higher PR

Ej.: 40.2012.21-3.580.04.1 PR560

 
lorenzo's Avatar
Posts: 491 | Thanked: 299 times | Joined on Jul 2012 @ Pordenone IT
#5
thank you, i thought it but that's the fw of 059L5H1 code...
anyway where i can find it?

found pr480 here http://www.mrcrab.net/nokia/Nokia_N9...n=20.2011.40.4
apparently there are two different fw for the same product code
edit: that was pr 1.2

Last edited by lorenzo; 2014-12-13 at 22:33.
 
lorenzo's Avatar
Posts: 491 | Thanked: 299 times | Joined on Jul 2012 @ Pordenone IT
#6
it seems that 40.2012.21-3.480.04.1 stands for 64GB Black Country Variant Switzerland, how can it be? it's the 16BG model!
 
coderus's Avatar
Posts: 6,436 | Thanked: 12,699 times | Joined on Nov 2011 @ Ängelholm, Sweden
#7
wtf are you talking about? you need only main firmware file, not emmc.
__________________
Telegram | Openrepos | GitHub | Revolut donations
 
Posts: 290 | Thanked: 385 times | Joined on Jan 2012 @ Madrid, Spain
#8
Originally Posted by lorenzo View Post
it seems that 40.2012.21-3.480.04.1 stands for 64GB Black Country Variant Switzerland, how can it be? it's the 16BG model!
Hi.
This is because the device has been reflashed before.
Forget about the color & country variant & capacity and reflash exactly the same image which is already in the phone. It should fix your problem.
Also follow Coderus advice and flash only the rootfs image. This option will not overwrite the user home directory and you'll be able to recover the contacts & other personal stuff.
Good luck!
Regards.
 

The Following User Says Thank You to pasko For This Useful Post:
lorenzo's Avatar
Posts: 491 | Thanked: 299 times | Joined on Jul 2012 @ Pordenone IT
#9
ok, flashed it! now works but i want to understand: that code belongs to 64gb black and i have a 16gb cyan? how can this be possible?
 
peterleinchen's Avatar
Posts: 4,117 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#10
Hmmm, miracle?


All firmware/rootfs (not the eMMC) are the same (almost, e.g. asian ones: cmt), so working for all devices.

The Switzerland has one of the highest PR number, so can (almost) always be used to flash a device clean.
But you are fixed to that PR number now, no way to flash the general PR001 or any other.
See also here.
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature

Last edited by peterleinchen; 2014-12-14 at 10:48.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 17:51.