I was doing a zeroize device flash and it got stuck in the middle so I unplugged it and when I tried to boot it up it didn't and it didn't also flash. When trying to switch on the led switches on and stays on for 10-15 seconds and it goes out and when I try to flash it windows does not detect it. At first it detects it and a second later it does not and as booting up the led switches on for 10-15 seconds and windows again detects it and a second later it does not this continues.
I need help I am using Nokia N9 as my primary phone it great.

Try to flash with linux.

The computer detects it for a 2-3 seconds only so flasher doesnot work anymore. when i press the power key the led lights up but no vibration and the led stays on for 10-15 seconds thats all.

This is a well meant advice!


--
if you are not willing/able to use Linux: according to the description you gave, I would try a cold flash (add parameter -c)

As I said, try these first;

• Flash with linux (windoze sometimes does not work so well)
• Use cold flash "-c" option

If these don't help, then there are more drastic solutions; You could boot in maintanance mode and manually repartition the device.

will it work if i try flasher in linux using virtualbox?

Should be okay, but liveCD is also possible.

Nothing is working out. Is there any other solution.

Can you tell everyting you have tried, "all" is very large concept.
Have you tried loading a rescue mode kernel?

i have tried windows flasher.
i have tried flashing with virtual box.
Couldn't do with a linux flasher.
what is a rescue mode kernel?
I took it to a repair shop and they said the micro usb port is damaged and they can't fix it cause they might damage a some chip or so.