Active Topics

 


Page 1 of 3 1 23
Reply
Thread Tools
Dany-69 is offline Dany-69
2010-12-10 , 18:26
Posts: 326 | Thanked: 335 times | Joined on Feb 2010
#1
Guys I've got an issue which I can't get to the bottom of, I was just wondering if anyone had any ideas as to what it could be?

OK let me explain the situation:

1) N900 works fine, volume set to max (or anything other than mute).

2) Reboot, N900 working perfectly as before, however now volume is set to mute. I can manually increase the volume and everything including sound still works.

3) Reboot, again volume on restart is set to 0 (even though I turned it up before powering down). Without touching the volume (leaving it on mute) I again power down.

4) Reboot, this time no sound, volume buttons not working, no system sounds (no calls, sms, or any other sound..) and an error message displays when trying to play an audio file ("Impossibile riprodurre il file multimediali. Formato multimediale non supportato." ... that translated : "Unable to reproduce multimedia file. Unsupported multimedia format").

5) Via the status menu I increase the volume to max (which has to be via the status menu as volume rocker doesn't work) and power down.

6) This time on re-start the volume is set to 0 but it's working, and I can play audio tracks increasing the volume.

Basically, if I leave the volume alone and reboot I lose all sound, however if I alter the state of the volume before a reboot (even though it's still set to mute on re-start) it all works.

What's going on?

I've tried even these commands under the advice of the big D4rklar ... but no results

http://talk.maemo.org/showpost.php?p=250867&postcount=1

My n900 takes the command but still the same error..

Tnx again to D4rklar for all the help
__________________
______________________
______________________
Last edited by Dany-69; 2010-12-10 at 19:37.
 

The Following 2 Users Say Thank You to Dany-69 For This Useful Post:
ScourgeV is offline ScourgeV
2010-12-10 , 18:46
Posts: 38 | Thanked: 7 times | Joined on Jan 2010
#2
Originally Posted by Dany-69 View Post
Guys I've got an issue which I can't get to the bottom of, I was just wondering if anyone had any ideas as to what it could be?

OK let me explain the situation:

1) N900 works fine, volume set to max (or anything other than mute).

2) Reboot, N900 working perfectly as before, however now volume is set to mute. I can manually increase the volume and everything including sound still works.

3) Reboot, again volume on restart is set to 0 (even though I turned it up before powering down). Without touching the volume (leaving it on mute) I again power down.

4) Reboot, this time no sound, volume buttons not working, no system sounds (no calls, sms, or any other sound..) and an error message displays when trying to play an audio file ("Impossibile riprodurre il file multimediali. Formato multimediale non supportato." ... that translated : "Unable to reproduce multimedia file. Unsupported multimedia format").

5) Via the status menu I increase the volume to max (which has to be via the status menu as volume rocker doesn't work) and power down.

6) This time on re-start the volume is set to 0 but it's working, and I can play audio tracks increasing the volume.

Basically, if I leave the volume alone and reboot I lose all sound, however if I alter the state of the volume before a reboot (even though it's still set to mute on re-start) it all works.

What's going on?

I've tried even these commands under the advice of the big D4rklar ... but no results

http://talk.maemo.org/showpost.php?p=250867&postcount=1

My n900 takes the command but still the same error..

Tnx again to D4rklar for all the help
i have and have had the same problem and i dont actually now how to fix but to reflash haha BUT i do know that if i go in to xterm and use the command start pulseaudio the sound comes back no problem. only down side is if you reboot you will have to type the command again haha hope this helps!
 

The Following User Says Thank You to ScourgeV For This Useful Post:
Dany-69 is offline Dany-69
2010-12-10 , 19:11
Posts: 326 | Thanked: 335 times | Joined on Feb 2010
#3
Mmm..... With "start pulseaudio" no result and this output in the terminal :

Code:
Nokia-N900:~# start pulseaudio
pulseaudio (start) waiting
pulseaudio (stop) starting
pulseaudio (stop) starting
pulseaudio (stop) waiting
start: pulseaudio respawning too fast, stopped
Nokia-N900:~#
Trying only with pulseaudio...
This output

Code:
Nokia-N900:~# pulseaudio
W: main.c: This program is not intended to be run as root (unless --system is specified).
W: module-alsa-sink-old.c: Buffer underrun ! frames: 1920
AEP runtime switch bbaid1n-wr0-h9a22b--dbxpb--
>>>>>>>>>>>>>> Init begin >>>>>>>>>>>>>Init 1166
Init 1218
Init 1245
Init 1285
Init 1388
Init 1445
../execute/d4gnt560:
Init 2316
Init 2425

 RX ATTN profile = 2
TX ATTN profile = 2

 PA active in D-ALWE & U-ALWE

 PA NORMAL PROF

 A_BF_CN: DISABLED

 Noise robust VAD active in UPLINK and DOWNLINK

 XDRC ON

  AEP scalability: PREMIUM!

 Default: Two-mic front-end off.

 Default: AV-connector gaps detection off.
Init 2934
, Multiband-UDRCU_ALWE and D_ALWE; MDRC; AEC; IHF; AGC for dig-mics; 10 ms frames; NB (Fs=8kHz)., TX-iAVC enabled WNR=OFF Normal Audio profile. Whisper mode on ABE OFF, Rx-signal decimated
Init 2998
xdrc_tables.ls_limit_levels_dB100 *****  xdrc_tables.eq_limit_levels_dB100 ****** xdrc_tables.drc_ch_tbl_Hz
****************** INIT DONE ************* E: client-ext.c: client-ext.c: Can't obtain command line
Then it remains waiting for an input... co i press control+c to close... e this other messages appears:

Code:
^CE: module-alsa-sink-volume.c: This in not my sink, what to do?
E: voice-hw-sink-input.c: Master sink "sink.hw0" not found
E: voice-hw-source-output.c: Master source "source.hw0" not found
E: voice-cmtspeech.c: closing the modem instance
W: voice-util.h: voice_memchunk_pool empty, all 128 slots allocated
E: memblock.c: Memory pool destroyed but not all memory blocks freed! 1 remain.
Nokia-N900:~#
Here the screen :



I don't like that red color ...
__________________
______________________
______________________
 
D4rKlar's Avatar
D4rKlar is offline D4rKlar
2010-12-10 , 19:30
Posts: 675 | Thanked: 923 times | Joined on Apr 2010 @ London
#4
Bump!!

Anyone got any idea what's happening here? Stumped me..

Kind Regards,
D4rKlar
__________________
_________________________
_________________________________
_
* D4rKlar on DeviantART * Maemo5 on DeviantART *
_
* M4riNa D4rK Theme and Iconset *
_
 

The Following 2 Users Say Thank You to D4rKlar For This Useful Post:
MohammadAG's Avatar
MohammadAG is offline MohammadAG
2010-12-10 , 20:18
Posts: 2,473 | Thanked: 12,265 times | Joined on Oct 2009 @ Jerusalem, PS/IL
#5
As per: http://talk.maemo.org/showpost.php?p...4&postcount=35

Code:
cp /opt/maemo/usr/lib/libFLAC.so.8.2.0 /usr/lib/libFLAC.so.8.2.0
Someone fix the libflac8 package and deoptify it.
 

The Following 4 Users Say Thank You to MohammadAG For This Useful Post:
D4rKlar's Avatar
D4rKlar is offline D4rKlar
2010-12-10 , 20:31
Posts: 675 | Thanked: 923 times | Joined on Apr 2010 @ London
#6
Originally Posted by MohammadAG View Post
As per: http://talk.maemo.org/showpost.php?p...4&postcount=35

Code:
cp /opt/maemo/usr/lib/libFLAC.so.8.2.0 /usr/lib/libFLAC.so.8.2.0
Someone fix the libflac8 package and deoptify it.
LOL If anyone can...

MAG You're an absolute legend mate!!

Kind Regards,
D4rK
__________________
_________________________
_________________________________
_
* D4rKlar on DeviantART * Maemo5 on DeviantART *
_
* M4riNa D4rK Theme and Iconset *
_
 
Dany-69 is offline Dany-69
2010-12-10 , 20:35
Posts: 326 | Thanked: 335 times | Joined on Feb 2010
#7
WHAT THE F*CK ! O___O

It works... o.o
So ... now ... does someone know the reason of this problem?

What should not to be done (or installed) ? o.O
I don't think this is a bug of maemo ... because isn't a problem of all ...
__________________
______________________
______________________
 
D4rKlar's Avatar
D4rKlar is offline D4rKlar
2010-12-10 , 20:52
Posts: 675 | Thanked: 923 times | Joined on Apr 2010 @ London
#8
Originally Posted by Dany-69 View Post
WHAT THE F*CK ! O___O

It works... o.o
So ... now ... does someone know the reason of this problem?

What should not to be done (or installed) ? o.O
I don't think this is a bug of maemo ... because isn't a problem of all ...
From MohammadAG's reply I would say it's a bug...
libflac8 is optified when it shouldn't be.

I'd love to know what makes some N900s' suffer and some not though!

Kind Regards,
D4rKlar
__________________
_________________________
_________________________________
_
* D4rKlar on DeviantART * Maemo5 on DeviantART *
_
* M4riNa D4rK Theme and Iconset *
_
 
Dany-69 is offline Dany-69
2010-12-10 , 21:01
Posts: 326 | Thanked: 335 times | Joined on Feb 2010
#9
Mmm.. but can not be a bug strictly related to maemo just because some N900 suffer of this problem and some others do not... o.O

In addition, why touching the volume bar after the reboot the sound mysteriously worked? o.o
__________________
______________________
______________________
 
MohammadAG's Avatar
MohammadAG is offline MohammadAG
2010-12-10 , 21:30
Posts: 2,473 | Thanked: 12,265 times | Joined on Oct 2009 @ Jerusalem, PS/IL
#10
Apparently, sometimes pulseaudio is started before /opt is mounted, and it seems to be linked to it, it doesn't find the lib and therefore fails to start, this can be fixed by deoptifying the library, or starting pulseaudio after /home (and therefore /opt) is mounted.
 

The Following 2 Users Say Thank You to MohammadAG For This Useful Post:
Reply
Page 1 of 3 1 23

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 06:38.

Contact Us - Home - Archive - Top