Can anyone answer my question?

Here is the verbose output. I had to clip it a bit because it was too big for the forum. Let me know if you want the full output and I'll put it on my site.

I looks like I may have screwed things when I tried to change my Product Code from Malaysia to Northern Europe when I first got the phone. None of the certs match my product revision "RM-696 rev. 059K". From a bit of googling the 059K should be a number more like 1601.

Any advice on how to find the correct revision and how to change it?


----------------------

C:\program files\Nokia\Flasher>rem Zeroize with North Europe PR1.2

C:\program files\Nokia\Flasher>flasher.exe -v -f -F fw\059K0X6\DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_001-OEM1-958_ARM.bin -F fw\059K0X6\DFL61_HARMATTAN_30.2012.07-1.NORTHERNEUROPE_EMMC_NORTHERNEUROPE.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
[ 0.000000] WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty.

SW version in image: <none>
Image 'mmc', size 1627169 kB
Version DFL61_HARMATTAN_30.2012.07-1.NORTHERNEUROPE
SW version in image: DFL61_HARMATTAN_30.2012.07-1_PR_001
Image 'cert-sw', size 1408 bytes
Valid for RM-696: 0101, 0102, 0103, 0104, 0105, 0106
Version (null)
Image 'cert-sw', size 1408 bytes
Valid for RM-696: 0207, 0208
Version (null)
Image 'cert-sw', size 1408 bytes
Valid for RM-696: 0301, 0302, 0303, 0304, 0305, 0306
Version (null)
Image 'cert-sw', size 1408 bytes
Valid for RM-696: 0401, 0402, 0403, 0404, 0405, 0406
Version (null)

[CLIPPED]

Image 'cert-sw', size 1408 bytes
Valid for RM-696: 1507, 1508, 1509, 1510, 1601, 1602, 1603, 1604, 1605, 1701, 1702, 1703, 1704, 1705, 1801, 1802, 1803, 1804, 1805
Version (null)
Image 'cert-sw', size 1408 bytes
Valid for RM-696: 1901, 1902, 1903, 1904, 1905, 2001, 2002, 2003, 2004, 2005, 2101, 2102, 2103, 2104, 2105, 2201, 2202, 2203, 2204, 2205
Version (null)
Image 'kernel', size 2714 kB
Version 2.6.32-20115101+0m7
Image 'rootfs', size 1163796 kB
Version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image 'cmt-2nd', size 97280 bytes
Valid for RM-660
Valid for RM-680
Version (null)
Image 'cmt-2nd', size 97280 bytes
Valid for RM-690
Version (null)
Image 'cmt-2nd', size 97280 bytes
Valid for RM-696
Version (null)
Image 'cmt-2nd', size 97280 bytes
Valid for RM-716
Version (null)
Image 'cmt-2nd', size 97280 bytes
Valid for RX-71
Version (null)
Image 'cmt-algo', size 808192 bytes
Valid for RM-660
Valid for RM-680
Version (null)

[CLIPPED]

Image 'secondary', size 96768 bytes
Valid for RM-696: 1503, 1504, 1505, 1506
Version 2.3.6+0m7
Image 'secondary', size 96768 bytes
Valid for RM-696: 1507, 1508, 1509, 1510, 1601, 1602, 1603, 1604, 1605, 1701, 1702, 1703, 1704, 1705, 1801, 1802, 1803, 1804, 1805
Version 2.3.6+0m7
Image 'secondary', size 96768 bytes
Valid for RM-696: 1901, 1902, 1903, 1904, 1905, 2001, 2002, 2003, 2004, 2005, 2101, 2102, 2103, 2104, 2105, 2201, 2202, 2203, 2204, 2205
Version 2.3.6+0m7
Image '1st', size 26496 bytes
Valid for RM-680: 916
Version 2.3.6+0m7
Image '1st', size 26368 bytes
Valid for RM-680: 922
Version 2.3.6+0m7
Image '1st', size 13312 bytes
Valid for RX-71: 000
Version 2.3.6+0m7
Image '1st', size 26368 bytes
Valid for RX-71: 166
Version 2.3.6+0m7
Image 'ape-algo', size 7096 kB
Version (null)
[ 0.890625] Ping attempt 1 (250 ms)
[ 0.906250] Server application: 1.7.2
[ 0.921875] Found product RM-696 rev. 059K
[ 0.921875] Server implements softupd protocol version 1.8
[ 0.921875] Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
[ 0.921875] Image cert-sw not present for this HW (RM-696 rev. 059K)
[ 0.921875] Image xloader not present for this HW (RM-696 rev. 059K)
[ 0.921875] Image secondary not present for this HW (RM-696 rev. 059K)
[ 0.937500] Image moslo not present
[ 0.937500] This rootfs is for eMMC
[ 0.937500] Image tar skipped
[ 0.937500] Image config skipped
[ 0.937500]
Battery level 40 %, continuing.
[572.562500]
image [state progress transfer flash speed]
[572.562500] ---------------------------------------------------------------------
[572.562500] [x] cmt-2nd [finished 100 % 95 / 95 kB[572.562500] NA ]
[572.562500] [x] cmt-algo [finished 100 % 789 / 789 kB[572.562500] NA ]
[572.562500] [x] cmt-mcusw [finished 100 % 6050 / 6050 kB[572.562500] 3024 kB/s]
[572.562500] [x] kernel [finished 100 % 2714 / 2714 kB[572.562500] 1182 kB/s]
[572.562500] [x] rootfs [finished 100 % 1163796 / 1163796 kB[572.562500] 4573 kB/s]
[572.562500] [x] mmc [finished 100 % 1627169 / 1627169 kB[572.562500] 5502 kB/s]
[572.562500] Updating SW release
[572.687500] Success

Thanks for making this great guide !

HELP !!!

I flashed my phone from malaysian version to european version, and I got the apparently common CMT error ???

I see the apparently easy solution of reinstalling the native firmware app. However Where do I find the native firmware at ???

That explains everything - your guess is right on the dot.

If you can figure out what your hardware variant code is, use whatever you tried to change your product code with to set it to xxxx00 (where xxxx is the HW variant). If you flash back to PR1.1 you might be able to figure out which HW variant your phone is using sysinfoclient -a.

This is why changing the product code is ill-advised - remember, there's no need to do so before flashing!

Im gonna try to reflash my device. In the directions it states that i shld change the main.bin & eMMC.bin to the image names im supposed to flash to. does this mean i shld change the main.bin image name to smth like
DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_005-OEM1-958_ARM.bin
? Thanks for all the help guys

What is your phone product code and what version of the EU firmware did you use?

Thanks, totally agree about changing the product code. The only advantage it has is enabling OTA and NSU for future updates to the new product code.

sysinfoclient -a isn't revealing anything. May have to ask a friend at Nokia for a favour but am going to look at some of the certs on the phone first.

http://www.youtube.com/watch?v=70c1z...eature=related

For the english users just found it as a recommended link from spanish video

I do think this is the reason. because I did change my product code to northern europe, too, before having this issue. Using NSS. because I thought I need to change the product code before installing other variant