it gets hot because it continuously keep talking with CMT and fails. you can kill /usr/sbin/csd that keeps cpu busy by making an infinite loop.

kumary,

Could you do a simple reflash using australian firmware and post the ouput? That would show if the australian cmt is flashed successfully or not

Here you go my friend.

I haven't inserted my SIM while doing this flash.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Administrator>cd/

C:\>cd c:\Program Files\Nokia\Flasher

c:\Program Files\Nokia\Flasher>flasher -f -F main.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.299.1_PR_299
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 12059 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.299.1_PR_299
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 25 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[_] cmt-algo [init 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1797 kB/s]
[_] rootfs [writing 0 % 30720 / 1170333 kB 1750 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[f] cmt-algo [init 0 % 789 / 789 kB NA ]
[-] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1797 kB/s]
[x] rootfs [finished 100 % 1170333 / 1170333 kB 7217 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

Sigh maybe the chinese cmt broke it?

No, Yesterday I flashed it three to four times with the original firmware prior using the chinese cmt today.

The output was same no changes.

This is different from issues I was facing , please see error again.
This is different from my error which was related to CMT clearly.
There is one more user who is facing exactly same issue.
http://talk.maemo.org/showthread.php?t=82693&page=78

Try to contact him and see if he got any success. My guess is that this error is more related to hardware.

Again, as I said try chinese CMT only after you have tried other higher version fw like german, north europe etc.

For your reference:

Time for a new device maybe

Thanks to both Suyog and over beloved thedead for helping me on this issue.

And yes it seems a hardware issue to me as well and I thinks its time for a new phone and a new thread. See you guys on that thread.