Notices


Reply
Thread Tools
Posts: 36 | Thanked: 24 times | Joined on Oct 2014
#51
ubuntu@ubuntu:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 54:53:ed:2c:32:2e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:792 errors:0 dropped:0 overruns:0 frame:0
TX packets:792 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:81910 (81.9 KB) TX bytes:81910 (81.9 KB)

wlan0 Link encap:Ethernet HWaddr 08:3e:8e:b3:46:af
inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a3e:8eff:feb3:46af/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28454 errors:0 dropped:0 overruns:0 frame:0
TX packets:18434 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:37510473 (37.5 MB) TX bytes:2081035 (2.0 MB)

ubuntu@ubuntu:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 54:53:ed:2c:32:2e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:792 errors:0 dropped:0 overruns:0 frame:0
TX packets:792 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:81910 (81.9 KB) TX bytes:81910 (81.9 KB)

wlan0 Link encap:Ethernet HWaddr 08:3e:8e:b3:46:af
inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a3e:8eff:feb3:46af/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28473 errors:0 dropped:0 overruns:0 frame:0
TX packets:18447 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:37511691 (37.5 MB) TX bytes:2082315 (2.0 MB)
 

The Following User Says Thank You to wre For This Useful Post:
Community Council | Posts: 3,984 | Thanked: 9,417 times | Joined on May 2012 @ Southerrn Finland
#52
Okay, no USB IP interface there at all.
Are you running a virtual installation? If so, you need to enable USB access in the virtual machine.
 

The Following 2 Users Say Thank You to juiceme For This Useful Post:
Posts: 36 | Thanked: 24 times | Joined on Oct 2014
#53
Yeah i'm running Ubuntu through USB
 

The Following 2 Users Say Thank You to wre For This Useful Post:
Community Council | Posts: 3,984 | Thanked: 9,417 times | Joined on May 2012 @ Southerrn Finland
#54
Originally Posted by wre View Post
Yeah i'm running Ubuntu through USB
I am sorry I don't understand... unless you mean you have it installed on an USB memory stick, where you boot it from?

In that case it should be OK. I was wondering if you have a windows, and you are running linux on a virtual machine on top of the windows installation.

This does sound a bit strange; You are able to reach your N9 with flasher via USB port, so why does the booting N9 device not register on the USB bus when it should?

Can you check what "lsusb" command shows on the bus after you have the green text on the device?
 

The Following 2 Users Say Thank You to juiceme For This Useful Post:
Posts: 36 | Thanked: 24 times | Joined on Oct 2014
#55
Its been made bootable from USB, i'm using the 'try ubuntu'
 

The Following 2 Users Say Thank You to wre For This Useful Post:
Community Council | Posts: 3,984 | Thanked: 9,417 times | Joined on May 2012 @ Southerrn Finland
#56
Originally Posted by wre View Post
Its been made bootable from USB, i'm using the 'try ubuntu'
Yes, that should be OK as I said in the previous message

Can you check what "lsusb" command shows on the bus after you have the green text on the device?
 

The Following 2 Users Say Thank You to juiceme For This Useful Post:
Posts: 36 | Thanked: 24 times | Joined on Oct 2014
#57
ubuntu@ubuntu:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 5986:02d3 Acer, Inc
Bus 001 Device 005: ID 0489:e036 Foxconn / Hon Hai
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 054c:0707 Sony Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 

The Following User Says Thank You to wre For This Useful Post:
Community Council | Posts: 3,984 | Thanked: 9,417 times | Joined on May 2012 @ Southerrn Finland
#58
Originally Posted by wre View Post
ubuntu@ubuntu:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 5986:02d3 Acer, Inc
Bus 001 Device 005: ID 0489:e036 Foxconn / Hon Hai
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 054c:0707 Sony Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
No N9 seen there at all, hmm.
I'll have to check what it should look like, but my guess would be that there should be a line saying something about "ID 0421:xxxx Nokia Mobile Phones" or something...

Now, have you checked with different USB cables BTW? Also with different USB port. Sometimes a faulty cable can cause really strange things to happen...
 

The Following 2 Users Say Thank You to juiceme For This Useful Post:
Posts: 36 | Thanked: 24 times | Joined on Oct 2014
#59
Okay i used different cable am now connected.

ubuntu@ubuntu:~$ telnet 192.168.0.15
Trying 192.168.0.15...
Connected to 192.168.0.15.
Escape character is '^]'.
 

The Following User Says Thank You to wre For This Useful Post:
Community Council | Posts: 3,984 | Thanked: 9,417 times | Joined on May 2012 @ Southerrn Finland
#60
Originally Posted by wre View Post
Okay i used different cable am now connected.

ubuntu@ubuntu:~$ telnet 192.168.0.15
Trying 192.168.0.15...
Connected to 192.168.0.15.
Escape character is '^]'.
excellent

did you already check for the malf file?
 

The Following 2 Users Say Thank You to juiceme For This Useful Post:
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 11:45.