Page 3 of 3 12 3
Reply
Thread Tools
Mentalist Traceur is offline Mentalist Traceur
2012-10-03 , 20:01
Posts: 2,225 | Thanked: 3,822 times | Joined on Jun 2010 @ Florida
#21
My oldest N900 needed a reflash again recently, and it too had this error (the N900 in question stopped being my only/primary device precisely because of the telephony-functions-disabled error) - anyway, I had this error too (that, or alternatively, on a few attempts I got other more obscure CMT related errors), and after a bunch of attempts to reflash it that way, I gave up, and then next thing I know a few minutes later it booted up again, working fine. Perhaps it's possible that you don't actually need the CMT flashing part to succeed, and the rest of the flash already gets done before the flasher fails due to CMT error(s)?

*Shrug* Worth some more testing.
 

The Following User Says Thank You to Mentalist Traceur For This Useful Post:
jd4200's Avatar
jd4200 is offline jd4200
2012-10-04 , 00:07
Posts: 451 | Thanked: 424 times | Joined on Apr 2010 @ England
#22
MT:
I rebooted numerous times after the flashing apparently failed and I was greeted with a very strange looking (missing fonts I presume), and completely unusable, display.

From what I've read many vital steps come during and after the CMT flashing phase (such as setting up the filesystem).

It's strange how this error effects those with the 'telephony functions disabled error' (including mine), even more strange as why pushing the battery in hard eventually fixed the issue.
__________________
BTC:
19ePiXZUdxqNAq9tStLzZV4dduSQeGPJzj
 

The Following User Says Thank You to jd4200 For This Useful Post:
paranoik is offline paranoik
2013-03-13 , 19:15
Posts: 1 | Thanked: 0 times | Joined on Feb 2013 @ Paris
#23
Hi,

I had the same issue and when pushing battery, like said above, the flashing passed.

I guess the issue is related to the one described in http://talk.maemo.org/showthread.php?t=66870&page=19.

To test, I put some paper under the phone's body and the sheild protecting those chips.

I've tried to reflash my device and it went smoothly. When booting the phone I have no more the message "All telephony functions are disabled. bla bla bla...", just something like "Unable to connect. Contact service".

I guess the hardware problem could be fixed by resoldering those chips or putting some more presure on them.

I'll test and keep you updated.
Last edited by paranoik; 2013-03-13 at 19:22.
 
aby2210 is offline aby2210
2013-07-12 , 20:02
Posts: 24 | Thanked: 2 times | Joined on Feb 2012
#24
Yeah! Paper between the battery and the body can work technically but i got a permanent solution! u Just need a pen with a spring and a glue! after a long time my n900 is on its legs again !! JUST HAVE A LOOK AT http://www.jabawok.net/?p=14 ... and try it,,, It WORKED for me!
 

The Following 2 Users Say Thank You to aby2210 For This Useful Post:
dktr.k1 is offline dktr.k1
2014-02-03 , 02:16
Posts: 12 | Thanked: 28 times | Joined on Aug 2013
#25
Originally Posted by aby2210 View Post
Yeah! Paper between the battery and the body can work technically but i got a permanent solution! u Just need a pen with a spring and a glue! after a long time my n900 is on its legs again !! JUST HAVE A LOOK AT http://www.jabawok.net/?p=14 ... and try it,,, It WORKED for me!
WOW! very nice!

I had the "Al telephony functions"-problem. So I opened my phone (not the 1st time) lifted up the contact-pins to the GSM anthena, but problem persisted...Then re-flashed, but had the CMT failure...I did the "pressure-your phone while ereasing and programming CMT" and the flashing process worked! So, I took your advide and did the following:

https://fbcdn-sphotos-d-a.akamaihd.n...42887194_n.jpg

. It was a bit scary to take out the aluminium shield for the 1st time!! But now my N900 doesn't lose the THelephony functions so I'm really satisfied

Thanx for the advice!
 

The Following 2 Users Say Thank You to dktr.k1 For This Useful Post:
mccrea119 is offline mccrea119
2014-03-02 , 09:03
Posts: 2 | Thanked: 1 time | Joined on Mar 2014 @ Harare, Zimbabwe
#26
Originally Posted by aby2210 View Post
Yeah! Paper between the battery and the body can work technically but i got a permanent solution! u Just need a pen with a spring and a glue! after a long time my n900 is on its legs again !! JUST HAVE A LOOK AT http://www.jabawok.net/?p=14 ... and try it,,, It WORKED for me!
my phone won't finish flashing, i think at the end after kennel or something it says CMT flashing failed or flashing failed can't really see because it closes the cmd soon after, please help me... please
 
mbzadegan is offline mbzadegan
2014-03-26 , 12:00
Posts: 7 | Thanked: 0 times | Joined on Mar 2011 @ Sepahan
#27
WOWW, Excellent, I repaired it with just one piece of Lentil size of sponge on the back of its battery!!
Now, When i dial *#06# i can read right my IMEI, (Yesterday my IMEI was blank)
BUT still i have not any antenna!
How can i do?
 
aby2210 is offline aby2210
2014-07-15 , 21:03
Posts: 24 | Thanked: 2 times | Joined on Feb 2012
#28
Originally Posted by mccrea119 View Post
my phone won't finish flashing, i think at the end after kennel or something it says CMT flashing failed or flashing failed can't really see because it closes the cmd soon after, please help me... please
Sorry For Sooo Late Rply!!

If You Still could not figure it out..here is the solution!!

First Try Some Basic Resolutions Before Going For Anything Complicated!!

1) Keep a Piece of paper(or another unused sim) just above your sim slot(obviously with a sim in it) and then try flashing again..

Didn't Work? Ok!

Go For This Tutorial [ http://www.jabawok.net/?p=14 ]

Worked For Me and dktr.k1 as well..

Originally Posted by dktr.k1 View Post
WOW! very nice!

I had the "Al telephony functions"-problem. So I opened my phone (not the 1st time) lifted up the contact-pins to the GSM anthena, but problem persisted...Then re-flashed, but had the CMT failure...I did the "pressure-your phone while ereasing and programming CMT" and the flashing process worked! So, I took your advide and did the following:

https://fbcdn-sphotos-d-a.akamaihd.n...42887194_n.jpg

. It was a bit scary to take out the aluminium shield for the 1st time!! But now my N900 doesn't lose the THelephony functions so I'm really satisfied

Thanx for the advice!
Best Of Luck
 
aby2210 is offline aby2210
2014-07-15 , 21:04
Posts: 24 | Thanked: 2 times | Joined on Feb 2012
#29
Originally Posted by dktr.k1 View Post
WOW! very nice!

I had the "Al telephony functions"-problem. So I opened my phone (not the 1st time) lifted up the contact-pins to the GSM anthena, but problem persisted...Then re-flashed, but had the CMT failure...I did the "pressure-your phone while ereasing and programming CMT" and the flashing process worked! So, I took your advide and did the following:

https://fbcdn-sphotos-d-a.akamaihd.n...42887194_n.jpg

. It was a bit scary to take out the aluminium shield for the 1st time!! But now my N900 doesn't lose the THelephony functions so I'm really satisfied

Thanx for the advice!
Your Welcome !
 
Reply
Page 3 of 3 12 3

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 12:42.

Contact Us - Home - Archive - Top