Active Topics
-
Full linux distros on Sailfish OS (253)
to SailfishOS by qoh - 1 day, 7 hrs ago - more...
 |
|
2012-08-06
, 03:59
|
|
Posts: 1,359 |
Thanked: 1,292 times |
Joined on Oct 2011
@ Tartus.Syria
|
#2
|
hi,
http://wiki.maemo.org/Updating_the_tablet_firmware
http://wiki.maemo.org/Updating_the_tablet_firmware
__________________
[ N900-Crack ] [ The Purge ] [ New Smiles ] [ New icons ] [ ? ]
" Hey ! I've just met you and this is crazy, so install cssu maybe ? "
Please help out keeping Maemo.org alive, and consider donating.
https://www.facebook.com/ZoRk7
[ N900-Crack ] [ The Purge ] [ New Smiles ] [ New icons ] [ ? ]
" Hey ! I've just met you and this is crazy, so install cssu maybe ? "
Please help out keeping Maemo.org alive, and consider donating.
https://www.facebook.com/ZoRk7
|
|
2012-08-06
, 04:05
|
|
Posts: 4 |
Thanked: 0 times |
Joined on Aug 2012
|
#3
|
after reboot menu u-boot always show and not flash. =(
|
|
2012-08-06
, 04:09
|
|
Posts: 1,359 |
Thanked: 1,292 times |
Joined on Oct 2011
@ Tartus.Syria
|
#4
|
you need to flash the whole device, emmc + rootfs, please read the wiki 
__________________
[ N900-Crack ] [ The Purge ] [ New Smiles ] [ New icons ] [ ? ]
" Hey ! I've just met you and this is crazy, so install cssu maybe ? "
Please help out keeping Maemo.org alive, and consider donating.
https://www.facebook.com/ZoRk7
[ N900-Crack ] [ The Purge ] [ New Smiles ] [ New icons ] [ ? ]
" Hey ! I've just met you and this is crazy, so install cssu maybe ? "
Please help out keeping Maemo.org alive, and consider donating.
https://www.facebook.com/ZoRk7
|
|
2012-08-06
, 04:18
|
|
Posts: 119 |
Thanked: 24 times |
Joined on Jun 2012
|
#5
|
|
|
2012-08-06
, 04:28
|
|
Posts: 4 |
Thanked: 0 times |
Joined on Aug 2012
|
#6
|
after reboot device, i put "U" and connect usb cable to pc but not intro "Update Mode", only show menu u-boot.
|
|
2012-08-06
, 07:30
|
|
Posts: 1,808 |
Thanked: 4,272 times |
Joined on Feb 2011
@ Germany
|
#7
|
make sure the battery is fully loaded,
unplug all cables,
turn off,
remove battery,
connect USB cable from N900 to PC,
start flasher on PC,
slide out keyboard,
hit U, and keep it pressed while you plug the battery back in
wait until you see the NOLO screen ("NOKIA") and a small USB symbol on top right,
flasher on PC should recognize the N900 and do the flashing
unplug all cables,
turn off,
remove battery,
connect USB cable from N900 to PC,
start flasher on PC,
slide out keyboard,
hit U, and keep it pressed while you plug the battery back in
wait until you see the NOLO screen ("NOKIA") and a small USB symbol on top right,
flasher on PC should recognize the N900 and do the flashing
|
|
2012-08-06
, 16:17
|
|
Posts: 4 |
Thanked: 0 times |
Joined on Aug 2012
|
#8
|
Thank for support, I will try.
|
|
2012-08-07
, 14:52
|
|
Posts: 32 |
Thanked: 30 times |
Joined on Jul 2012
@ Deb & Ian's dooryard
|
#9
|
I ran into a similar situation today after some partition resizing and fortunately got my problem fixed (by repairing MyDocs partition, instead of reflash which I tried first out of laziness).
After that I think I can comprehend to OPs problem and will try to explain it.
This will probably not help ducanhtian, but maybe some more experienced users can catch up.
His problem is: flasher only recognizes the N900 for half a second and then immediately jumps to u-boot.
On my device after starting flasher and the usual “no device recognized”, if now inserting the battery while pressing 'u', flasher shows “booting into flash….”, but shortly after that again shows “ no device ..” and the n900 switched to u-boot.
Tried many different ways, by changing order of cable and battery insertion, or f.e. holding 'u' all the time, but could not get the n900 into flashing mode. Instead u-boot always took over.
Last edited by conred; 2012-08-07 at 14:58.
After that I think I can comprehend to OPs problem and will try to explain it.
This will probably not help ducanhtian, but maybe some more experienced users can catch up.
His problem is: flasher only recognizes the N900 for half a second and then immediately jumps to u-boot.
On my device after starting flasher and the usual “no device recognized”, if now inserting the battery while pressing 'u', flasher shows “booting into flash….”, but shortly after that again shows “ no device ..” and the n900 switched to u-boot.
Tried many different ways, by changing order of cable and battery insertion, or f.e. holding 'u' all the time, but could not get the n900 into flashing mode. Instead u-boot always took over.
Last edited by conred; 2012-08-07 at 14:58.
Thanks so much