Active Topics

 


Reply
Thread Tools
Posts: 20 | Thanked: 34 times | Joined on Oct 2018 @ Sweden
#41
Update! Tried this (thank you aspergerguy.)
Any suggestions ?



>flasher -f -F c:\main.bin --erase-user-data=secure -F c:\emmc.bin --erase-mmc=secure
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Warning: user data may reside on MMC. In that case the MMC is unnecessarily erased twice.

Battery level 77 %, continuing.
Erasing, this may take a while.
Erase done.

Battery level 77 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 77 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3377 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2028 kB/s]
[f] rootfs [pending 0 % 2048 / 1170282 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3377 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2028 kB/s]
[f] rootfs [pending 0 % 2048 / 1170282 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not remove mount directory /tmp/sudmmcFq5tFf/mnt: No such file or directory
[Pipe 4] Finishing in error state with status 1
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe 7] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

Last edited by Gamerouge; 2018-11-08 at 20:54.
 

The Following User Says Thank You to Gamerouge For This Useful Post:
peterleinchen's Avatar
Posts: 4,117 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#42
You found thd right command
https://talk.maemo.org/search.php?searchid=21402586
https://talk.maemo.org/showpost.php?...postcount=1512

But
Originally Posted by nieldk View Post
@Gamerouge Best guess is the flash memory of device have gone bad, Not much to do about it.

As nieldk already is the guy with the bad info:
I am afraid to second that.

@niel: even I do not recognize the
MTC_NOS_READY
error
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature
 

The Following 2 Users Say Thank You to peterleinchen For This Useful Post:
Posts: 803 | Thanked: 1,585 times | Joined on Aug 2014
#43
Unfortunately you will find exactly the same scenario in this thread with no resolution:
https://talk.maemo.org/showthread.php?t=91333

Last edited by aspergerguy; 2018-11-08 at 23:43. Reason: Addition
 

The Following 3 Users Say Thank You to aspergerguy For This Useful Post:
peterleinchen's Avatar
Posts: 4,117 | Thanked: 8,901 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#44
There is also a slight possibility that the download is broken.
So if you know the checksum of the specific firmware revision file (there were/are lists in the web) then check or download it once more and compare.

I would also try once more:
Code:
flasher -f -F c:\main.bin --erase-user-data=secure -F c:\emmc.bin --erase-mmc=secure --no-preserve -c
without much hope indeed.
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature

Last edited by peterleinchen; 2018-11-09 at 20:32. Reason: cold flash parameter
 

The Following 3 Users Say Thank You to peterleinchen For This Useful Post:
Posts: 803 | Thanked: 1,585 times | Joined on Aug 2014
#45
Unfortunately Ancelad one of the Russian authorities upon the subject, concurs stating causes of flashing failure here quite succinctly:
1) Wrong firmware
2) Corrupt firmware image - compare checksums
3) Broken NAND
http://4pda.ru/forum/index.php?s=&sh...ost&p=26036061

Use of "zeroize device" unnecessarily also seems to be implicated as here:
http://nokiasymbianplus.blogspot.com...-comandos.html

Last edited by aspergerguy; 2018-11-09 at 16:01. Reason: Correction
 

The Following 2 Users Say Thank You to aspergerguy For This Useful Post:
Posts: 20 | Thanked: 34 times | Joined on Oct 2018 @ Sweden
#46
Originally Posted by peterleinchen View Post
There is also a slight possibility that the download is broken.
So if you know the checksum of the specific firmware revision file (there were/are lists in the web) then check or download it once more and compare.

I would also try once more:
Code:
flasher -f -F c:\main.bin --erase-user-data=secure -F c:\emmc.bin --erase-mmc=secure --no-preserve -c
without much hope indeed.

Will try this when I get home
 

The Following User Says Thank You to Gamerouge For This Useful Post:
Posts: 20 | Thanked: 34 times | Joined on Oct 2018 @ Sweden
#47
Originally Posted by aspergerguy View Post
Unfortunately Ancelad one of the Russian authorities upon the subject, concurs stating causes of flashing failure here quite succinctly:
1) Wrong firmware
2) Corrupt firmware image - compare checksums
3) Broken NAND
http://4pda.ru/forum/index.php?s=&sh...ost&p=26036061

Use of "zeroize device" unnecessarily also seems to be implicated as here:
http://nokiasymbianplus.blogspot.com...-comandos.html
I've tried with 3 different firmware editions, it does not feel like a corrupt firmware trouble. Tried with the 001, 003 and the 009.

Thanks again guys, for helping out.
 

The Following User Says Thank You to Gamerouge For This Useful Post:
Posts: 1,288 | Thanked: 4,316 times | Joined on Oct 2014
#48
Bad idea to flash 003 variant, that is for sure to give you troubles (you cant revert that CMT)
 

The Following 2 Users Say Thank You to nieldk For This Useful Post:
Posts: 20 | Thanked: 34 times | Joined on Oct 2018 @ Sweden
#49
Originally Posted by peterleinchen View Post
There is also a slight possibility that the download is broken.
So if you know the checksum of the specific firmware revision file (there were/are lists in the web) then check or download it once more and compare.

I would also try once more:
Code:
flasher -f -F c:\main.bin --erase-user-data=secure -F c:\emmc.bin --erase-mmc=secure --no-preserve -c
without much hope indeed.
Did try this,
It does not start due to:
"Looking for bootable USB device, waiting"
And nothing else happens, wa waiting about 40 minutes before I gave up.

I am currently looking for a new motherboard I guess.
Thanks anyhow
 

The Following User Says Thank You to Gamerouge For This Useful Post:
Posts: 803 | Thanked: 1,585 times | Joined on Aug 2014
#50
Originally Posted by Gamerouge View Post
I am currently looking for a new motherboard I guess.
Not anymore, sorted.
 

The Following 3 Users Say Thank You to aspergerguy For This Useful Post:
Reply

Tags
nokia n9

Thread Tools

 
Forum Jump


All times are GMT. The time now is 04:53.