Notices


Reply
Thread Tools
Posts: 1,042 | Thanked: 3,435 times | Joined on Oct 2014
#21
Originally Posted by mike727 View Post
Thank you.

The phone is still the same after cold flashing 299 with 003(CMT).

Is there anything else I should try, besides upgrade?
Could be messed up user partition.
I would try booting using rescue image, to get access to /home in order to check it out - and backup.
If you backed up, or doesn’t care of any data (photos etc), reflash Emmc also (You WILL loose whatever is installed besides factory apps)
__________________
You can still support my work by donation - click here

ETH: 0xf7544913017653719259c92d38d50d9d55f7c6cd
 

The Following User Says Thank You to nieldk For This Useful Post:
mike727's Avatar
Posts: 61 | Thanked: 117 times | Joined on Aug 2015 @ Australia
#22
Flashing emmc fixed 'Total storage'.
Telephony doesn't work (IMEI is listed), possibly because I used the wrong emmc file; China?: CF121574_DFL61_HARMATTAN_40.2012.13-7.PRC_EMMC_PRC.bin

Anyone have a link for 299's (?) emmc file?
DF5035B2_DFL61_HARMATTAN_40.2012.21-3.SEAP.16_EMMC_SEAP.bin

edit: Nokiafirm link is dead

Last edited by mike727; 2017-07-16 at 05:18.
 
peterleinchen's Avatar
Posts: 3,197 | Thanked: 5,777 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#23
Mike, after flashing eMMC (and firmware) you will need to restore telephony by flashing the chinese CMT only?
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature
 

The Following User Says Thank You to peterleinchen For This Useful Post:
mike727's Avatar
Posts: 61 | Thanked: 117 times | Joined on Aug 2015 @ Australia
#24
Originally Posted by peterleinchen View Post
Mike, after flashing eMMC (and firmware) you will need to restore telephony by flashing the chinese CMT only?
Yes, didn't forget that. No errors.

sudo flasher -F '/home/michael/Desktop/china/DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958_ARM.bin' --flash-only=cmt -f -R

Will go through the whole 'Deadly CMT' thread again.

Edit:
Acquired phone from seller. When last used years ago, telephony worked fine. Seller tested it, telephony was not working. I acquired the phone, tested telephony, cleaned SIM & sandwiched paper: nothing.

Before any flashing:
michael@michael-G41MT-ES2L ~ $ sudo flasher -i
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 011.

Device identifier: 35166########37 (SN: N/A)
Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_003
Success
Removed SIM card -> Flashed 299 (md5'd) -> errors with CMT -> flashed 003 CMT (md5'd) -> flashed Chinese eMMC (correct type?) -> Flashed 003 CMT

Now -i outputs :
michael@michael-G41MT-ES2L ~ $ sudo flasher -i
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 030.

Device identifier: 35166########37 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8
Success
Telephony, still not working.

Last edited by mike727; 2017-07-16 at 23:41.
 
peterleinchen's Avatar
Posts: 3,197 | Thanked: 5,777 times | Joined on Aug 2010 @ Ruhrgebiet, Germany
#25
After flashing eMMC you will first need to flash firmware again (or do it both together in one step). After that the chinese CMT only. Right?
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!

Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257

editsignature, http://talk.maemo.org/profile.php?do=editsignature
 

The Following User Says Thank You to peterleinchen For This Useful Post:
mike727's Avatar
Posts: 61 | Thanked: 117 times | Joined on Aug 2015 @ Australia
#26
Originally Posted by peterleinchen View Post
After flashing eMMC you will first need to flash firmware again (or do it both together in one step). After that the chinese CMT only. Right?
Thanks, gave that a go.... no telephony (emergency calls only)

edit: Tried a different eMMC file: DFL61_HARMATTAN_40.2012.13-7.EURASIA_EMMC_EURASIA.bin
Still no good

Last edited by mike727; 2017-07-16 at 23:48.
 
Reply

Tags
flashing n9, sim card

Thread Tools

 
Forum Jump


All times are GMT. The time now is 17:33.