Active Topics
-
Firefox with Leste (5)
to Maemo 7 / Leste by teroyk - 2 days, 19 hrs ago -
Handbook (2)
to Maemo 7 / Leste by teroyk - 3 days, 18 hrs ago - more...
| The Following User Says Thank You to tioubxancur For This Useful Post: | ||
|
2016-05-10
, 20:16
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#1332
|
Well, it is not that difficult.
If I correctly understand what you have in mind, it is just the picture-icons react to tapping, and the texts next to them only describe the actions, right?
To achieve that, all you need is to create the right-hand texts as png images just like described in the animatronics README, and modify the top level touchmap so that their area does not trigger any events... and that's all there is to it!
If I correctly understand what you have in mind, it is just the picture-icons react to tapping, and the texts next to them only describe the actions, right?
To achieve that, all you need is to create the right-hand texts as png images just like described in the animatronics README, and modify the top level touchmap so that their area does not trigger any events... and that's all there is to it!
|
|
2017-08-16
, 18:47
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1333
|
I'm trying once again to boot Debian with mainline kernel on my N950.
My Ubiboot configuration is: https://pastebin.com/dByXqphq
ubiboot.log: https://pastebin.com/HCV6y0kA
ubiboot.dmesg: https://pastebin.com/T9W6HeT6
The system lives for awhile and then reboots. I have no logs in /var/log/journal even though `Storage=persistent` is in /etc/systemd/journald.conf. On the Debian filesystem, /boot/bzImage is a symlink to /boot/vmlinuz-4.9.0-3-armmp (neither of them works)
Does it look like an error in ubiboot configuration?
My Ubiboot configuration is: https://pastebin.com/dByXqphq
ubiboot.log: https://pastebin.com/HCV6y0kA
ubiboot.dmesg: https://pastebin.com/T9W6HeT6
The system lives for awhile and then reboots. I have no logs in /var/log/journal even though `Storage=persistent` is in /etc/systemd/journald.conf. On the Debian filesystem, /boot/bzImage is a symlink to /boot/vmlinuz-4.9.0-3-armmp (neither of them works)
Does it look like an error in ubiboot configuration?
| The Following User Says Thank You to marmistrz For This Useful Post: | ||
|
|
2017-08-16
, 20:34
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#1334
|
So you have Debian on slot #5
Rootfs for it is on /dev/mmcblk0p4, and you have the kernel correctly placed in /boot/vmlinuz-4.9.0-3-armmp of the said partition.
According to the logs your setup is pretty much OK. The only thing that's not checked in your ubiboot version is the availability/executability of the init fie of the booting OS. (that is checked in the latest version, 0.3.6-tiny...)
So, according to ubiboot everything goes well until it hands execution to the newly loaded kernel. The new kernel then tries to execute /sbin/init.
How doe the boot continue, exactly?
You mention it goes OK first, then reboots?
Rootfs for it is on /dev/mmcblk0p4, and you have the kernel correctly placed in /boot/vmlinuz-4.9.0-3-armmp of the said partition.
According to the logs your setup is pretty much OK. The only thing that's not checked in your ubiboot version is the availability/executability of the init fie of the booting OS. (that is checked in the latest version, 0.3.6-tiny...)
So, according to ubiboot everything goes well until it hands execution to the newly loaded kernel. The new kernel then tries to execute /sbin/init.
How doe the boot continue, exactly?
You mention it goes OK first, then reboots?
|
|
2017-08-17
, 03:56
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#1335
|
One thing I thought about; have you turned off the watchdogs?
Debian of course doesn't know how to feed the dogs unless you added a script for that in initialization yourself...
Debian of course doesn't know how to feed the dogs unless you added a script for that in initialization yourself...
|
|
2017-08-17
, 17:54
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1336
|
Originally Posted by juiceme
Of course I did not.
One thing I thought about; have you turned off the watchdogs?
Debian of course doesn't know how to feed the dogs unless you added a script for that in initialization yourself...
Are the R&D flags explained anywhere? I see in 0xFFFF:
Code:
no-omap-wd disable auto reboot by OMAP watchdog no-ext-wd disable auto reboot by external watchdog no-lifeguard-reset disable auto reboot by software lifeguard
| The Following User Says Thank You to marmistrz For This Useful Post: | ||
|
|
2017-08-17
, 19:23
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1338
|
I disabled them all, unfortunately, the device reboots after a while. 
Is there any way to easily set up a telnet/ssh session to the device, like Nemo does? They're using their own `init-debug` script, though.
Last edited by marmistrz; 2017-08-17 at 19:56.
Is there any way to easily set up a telnet/ssh session to the device, like Nemo does? They're using their own `init-debug` script, though.
__________________
If you want to support my work, you can donate by PayPal or Flattr
Projects no longer actively developed: here
If you want to support my work, you can donate by PayPal or Flattr
Projects no longer actively developed: here
Last edited by marmistrz; 2017-08-17 at 19:56.
| The Following User Says Thank You to marmistrz For This Useful Post: | ||
|
|
2017-08-17
, 19:45
|
|
Community Council |
Posts: 4,920 |
Thanked: 12,867 times |
Joined on May 2012
@ Southerrn Finland
|
#1339
|
Originally Posted by marmistrz
How far do you get, I assume debian starts to at least some extent?
I disabled them all, unfortunately, the device reboots after a while.
The kernel you are using, did you compile it yourself with all the patches needed to make it work on N9?
Originally Posted by marmistrz
Sure you mean to the device, not from?
Is there any way to easily set up a telnet/ssh session from the device, like Nemo does? They're using their own `init-debug` script, though.
Easiest is to enable serial console and connect to N9's serial port with minicom; that is pretty much foolproof. Same way you will get kernel logs visible while the device is booting.
|
|
2017-08-17
, 19:58
|
|
Posts: 3,328 |
Thanked: 4,476 times |
Joined on May 2011
@ Poland
|
#1340
|
Originally Posted by juiceme
That was installed from the repo. 4.9 should have the most needed patches
How far do you get, I assume debian starts to at least some extent?
The kernel you are using, did you compile it yourself with all the patches needed to make it work on N9?
http://elinux.org/N950
The patches for display were not merged yet, though.
Originally Posted by juiceme
of course, to
Sure you mean to the device, not from?
Originally Posted by juiceme
and without unscrewing the device?
Easiest is to enable serial console and connect to N9's serial port with minicom; that is pretty much foolproof. Same way you will get kernel logs visible while the device is booting.
I'm a little afraid I'll break my N950.
| The Following User Says Thank You to marmistrz For This Useful Post: | ||
I was wondering if someone uses that or who knows it can point me to the .cpio file responsible. Perhaps someone still has it handy.