Reply
Thread Tools
panjgoori's Avatar
Posts: 1,236 | Thanked: 1,278 times | Joined on Aug 2011 @ Balochistan
#971
@pali thanks for the updated battery applet. i have to ask you something, your status area battery applet and battery eye shows different battery percent.

Battery eye showing less than 30 percent battery but battery applet showing 52 percent battery. And also battery icon shows less than 50 percent battery left. Is this a bug or it works like this. thanks. screenshot attached.
Attached Images
 
 
Posts: 2,153 | Thanked: 8,462 times | Joined on May 2010
#972
battery icon is reported by hald-addon-bme. battery percentage is calculated by formula: 100*(capacity-6)/94 and capacity is 100*current/design. It is because 0% must be reported when battery is too low (and that happends when capacity is about 6%) current mAh is reported by hald-addon-bme and design mAh is reported by kernel driver rx51_battery (or fallback to hald-addon-bme)
 

The Following 2 Users Say Thank You to pali For This Useful Post:
merlin1991's Avatar
Posts: 125 | Thanked: 1,142 times | Joined on Feb 2010 @ Austria
#973
New update did hit the repos, and since the wiki is read only here's the changelog:

Code:
  * camera-ui: use maemo-invoker, use NOKIA_CAMERA_DIR and NOKIA_MMC_CAMERA_DIR
  * hildon-desktop: fixed #12052, #12584 and #12629
  * ke-recv: added configuration to autolaunch usb0 in pc-suite mode
  * obexd: Initial MAP support (no notifiactions no message push), fixed bug in Irmc
  * openssl: fixed -dbg package (removed debug symbols from main package)
  * pulseaudio: added support for bluetooth AudioSource, added loopback module
  * rtcom-eventlogger-async: fixed dependency
  * status-area-orientationlock-applet: Added dutch translation (by adekker)
__________________
"Fog is neither water nor air, it's something between." Merlin
 

The Following 38 Users Say Thank You to merlin1991 For This Useful Post:
Posts: 49 | Thanked: 11 times | Joined on Mar 2010
#974
Originally Posted by merlin1991 View Post
New update did hit the repos, and since the wiki is read only here's the changelog:

Code:
  * camera-ui: use maemo-invoker, use NOKIA_CAMERA_DIR and NOKIA_MMC_CAMERA_DIR
  * hildon-desktop: fixed #12052, #12584 and #12629
  * ke-recv: added configuration to autolaunch usb0 in pc-suite mode
  * obexd: Initial MAP support (no notifiactions no message push), fixed bug in Irmc
  * openssl: fixed -dbg package (removed debug symbols from main package)
  * pulseaudio: added support for bluetooth AudioSource, added loopback module
  * rtcom-eventlogger-async: fixed dependency
  * status-area-orientationlock-applet: Added dutch translation (by adekker)
Quick question, should this update be avoided if currently running CSSU Thumb version?
 

The Following User Says Thank You to MarkyboyUK For This Useful Post:
Posts: 204 | Thanked: 423 times | Joined on Jan 2011
#975
You can upgrade safely. It will negate some benefits of CSSU-Thumb though.
 

The Following 9 Users Say Thank You to hxka For This Useful Post:
Posts: 21 | Thanked: 101 times | Joined on Aug 2012
#976
You should wait for the matching CSSU-thumb update, it should arrive shortly.
 

The Following 7 Users Say Thank You to Kerio For This Useful Post:
joerg_rw's Avatar
Posts: 2,222 | Thanked: 12,651 times | Joined on Mar 2010 @ SOL 3
#977
Originally Posted by MarkyboyUK View Post
Quick question, should this update be avoided if currently running CSSU Thumb version?
Though merlin1991 gave some more detailed differing explanation in IRC, I'd still like to state that - generally speaking - there's no compatibility between any two flavours of CSSU warranted or tested for. So updating from CSSU-T when you're on CSSU-thumb is not really supported (though it probably won't break anything), same as updating from CSSU-T isn't recommended when you're on CSSU-S.
As mentioned above those 'hybrid configs' are neither tested, nor is it a general maintenance goal in CSSU to keep the different flavours so much in sync that you could usually expect no problems when doing so.
For the particular question regarding CSSU-thumb: AFAIK it so far follows CSSU-T closely, with some weeks delay, so the recommended procedure is to wait for CSSU-thumb shipping the new update where CSSU-T6 updates are included. As mentioned in last post an update from CSSU-T on a CSSU-thumb system might 'roll back' some packages to non-thumbified versions, which for now is probably considered 'safe' but that's not warranted for the future.

Also refer to http://talk.maemo.org/showthread.php...36#post1297636

Anybody with better knowledge on details welcome to correct me.

cheers
jOERG
__________________
Maemo Community Council member [2012-10, 2013-05, 2013-11, 2014-06 terms]
Hildon Foundation Council inaugural member.
MCe.V. foundation member

EX Hildon Foundation approved
Maemo Administration Coordinator (stepped down due to bullying 2014-04-05)
aka "techstaff" - the guys who keep your infra running - Devotion to Duty http://xkcd.com/705/

IRC(freenode): DocScrutinizer*
First USB hostmode fanatic, father of H-E-N

Last edited by joerg_rw; 2012-11-24 at 18:01.
 

The Following 6 Users Say Thank You to joerg_rw For This Useful Post:
Posts: 535 | Thanked: 598 times | Joined on Apr 2011 @ Republic of the Philippines
#978
Just want to report that I updated yesterday and haven't encountered any problem with regular use.
Thanks for the update!
 

The Following 4 Users Say Thank You to vetsin For This Useful Post:
adelalgomai's Avatar
Posts: 54 | Thanked: 47 times | Joined on Oct 2011 @ Yemen
#979
I had cssu-thumb installed in my N900 , and when I updated the catalogs in app-manager I saw the new update to T-Maemo 6 .. I just updated to it and everything went ok and after rebooting I could see the version 1Tmaemo6 installed in my device , but with no thumb ... did that returned me to cssu-testing and just remove the thumb , or thumb was crashed ??
is there any effect on my device ??
can i roll back to thumb if the new update will be dangerous ??
 
joerg_rw's Avatar
Posts: 2,222 | Thanked: 12,651 times | Joined on Mar 2010 @ SOL 3
#980
Originally Posted by adelalgomai View Post
I had cssu-thumb installed in my N900 , and when I updated the catalogs in app-manager I saw the new update to T-Maemo 6 .. I just updated to it and everything went ok and after rebooting I could see the version 1Tmaemo6 installed in my device , but with no thumb ... did that returned me to cssu-testing and just remove the thumb , or thumb was crashed ??
is there any effect on my device ??
can i roll back to thumb if the new update will be dangerous ??
Please ask this question on this thread, since it's not really related to CSSU-T update.

/j
__________________
Maemo Community Council member [2012-10, 2013-05, 2013-11, 2014-06 terms]
Hildon Foundation Council inaugural member.
MCe.V. foundation member

EX Hildon Foundation approved
Maemo Administration Coordinator (stepped down due to bullying 2014-04-05)
aka "techstaff" - the guys who keep your infra running - Devotion to Duty http://xkcd.com/705/

IRC(freenode): DocScrutinizer*
First USB hostmode fanatic, father of H-E-N
 

The Following 4 Users Say Thank You to joerg_rw For This Useful Post:
Reply

Tags
cssu testing


 
Forum Jump


All times are GMT. The time now is 11:12.