Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (7)
to General by teroyk - 3 hrs, 19 mins ago - more...
|
2011-02-17
, 03:31
|
|
Posts: 290 |
Thanked: 68 times |
Joined on Nov 2009
@ Barbados/London
|
#2
|
bump...........................
 |
|
2011-02-17
, 07:12
|
|
Posts: 223 |
Thanked: 52 times |
Joined on Sep 2009
@ West Kirby, UK
|
#3
|
I have 905s will try at w/e
__________________
In dog years, I'm dead.
In dog years, I'm dead.
|
|
2011-02-21
, 22:49
|
|
Posts: 290 |
Thanked: 68 times |
Joined on Nov 2009
@ Barbados/London
|
#4
|
seems it was a software issue that was never rectified...
solution 1. get a new wired connection similar to what nokia gave in the box (the wired part that fits into the headset and into the device)
solution 2. push the 3.5mm side into the device partly (like 1st/2nd black mark on the 3.5mm)..you will/should hear distortion in the headset...once u hear that push the jack fully in...should work...
NOTE: there will be no headset icon most times
solution 1. get a new wired connection similar to what nokia gave in the box (the wired part that fits into the headset and into the device)
solution 2. push the 3.5mm side into the device partly (like 1st/2nd black mark on the 3.5mm)..you will/should hear distortion in the headset...once u hear that push the jack fully in...should work...
NOTE: there will be no headset icon most times
|
|
2011-02-21
, 23:27
|
|
Posts: 290 |
Thanked: 68 times |
Joined on Nov 2009
@ Barbados/London
|
#5
|
nope not with mine totally gone now...even after flashing the emmc and software no luck....but my solution works...and i seems its a software issue (discovered on this forum and europe.nokia.com)
are u using the wire that was sent with the bh-905 or regular headset?
are u using the wire that was sent with the bh-905 or regular headset?
|
|
2011-02-22
, 00:03
|
|
Posts: 303 |
Thanked: 175 times |
Joined on Oct 2009
@ London UK
|
#6
|
Do you mean 905 or 905i?
There are two cables that come with the 905i.. one works with the N900 the other works with the iphone.. Try the other cable..
The cable has three rings on the n900 end plug.. You can use the adapter that comes with the bh-905 to change it into a 2 ring plug.. That will also work..
In the headphone case, is there a D shaped pouch that comes out? This is a 905i case
How can you tell if you have 905 or 905i headphones?
Are there elastic loops on inside the case that the adapters and plugs fit into? This is a 905 case
In the headphone case, is there a D shaped pouch, a bit larger than the N900 that comes out? This is a 905i case..
There are two cables that come with the 905i.. one works with the N900 the other works with the iphone.. Try the other cable..
The cable has three rings on the n900 end plug.. You can use the adapter that comes with the bh-905 to change it into a 2 ring plug.. That will also work..
In the headphone case, is there a D shaped pouch that comes out? This is a 905i case
How can you tell if you have 905 or 905i headphones?
Are there elastic loops on inside the case that the adapters and plugs fit into? This is a 905 case
In the headphone case, is there a D shaped pouch, a bit larger than the N900 that comes out? This is a 905i case..
the headset connects via bluetooth perfectly...
using the wired connection it doesnt....well not really
if i have the headset placed to my ears and pull out the connection
from the 3.5mm jack and device(n900) i hear a "click"/slight distortion...
like you would regularly hear IF it was properly connected....
using another wired headset....and connecting them to the n900 3.5mm jack
as works well....
using the wired connection of the BH 905's to connect to another device...they
too work well....
just not on the n900...
i should also say they used to work the wired way before but then just stopped...
suggestions/advice?