Notices
Page 1 of 3 1 23
Reply
Thread Tools
manojkumaru is offline manojkumaru
2010-12-28 , 06:37
Posts: 116 | Thanked: 44 times | Joined on Nov 2010 @ Chennai, India
#1
I wrote the image of MeeGo onto my 2GB MicroSD and i once flashed with a
sudo flasher-3.5 -l -k <kernel> -b
and found it was working fine.. Then reverted back to Maemo.

First I was using bootmenu. Now i removed it and installed MultiBoot and the very next reboot made me stuck

I cant find any kernel listed down,(not even the native maemo OS kernel)

I cant make any selection,so the device again turns off.

If i try pressing '0', this again tells me,

'Can't flash kernel,required files not found.
Guru meditation#00000025.62017712

hit any key to panic'


Am dumbstruck!!!

Need to boot into maemo,without having to goto a desktop!!! possible????
 
flipalong is offline flipalong
2010-12-28 , 06:58
Posts: 265 | Thanked: 96 times | Joined on Aug 2010 @ Sydney, Australia
#2
u have to reflash u can reflash JUST THE KERNEL only if you want to.
wiki.maemo.org isnt working at the moment so i cant give you a link, ill try and find instructions elsewhere
 
flipalong is offline flipalong
2010-12-28 , 07:03
Posts: 265 | Thanked: 96 times | Joined on Aug 2010 @ Sydney, Australia
#3
Originally Posted by manojkumaru View Post
Need to boot into maemo,without having to goto a desktop!!! possible????
and sorry you have to use a computer
 
manojkumaru is offline manojkumaru
2010-12-28 , 07:06
Posts: 116 | Thanked: 44 times | Joined on Nov 2010 @ Chennai, India
#4
Originally Posted by flipalong View Post
u have to reflash u can reflash JUST THE KERNEL only if you want to.
wiki.maemo.org isnt working at the moment so i cant give you a link, ill try and find instructions elsewhere
Yeah,i tried the wiki,but its down now.. And i can just reflash the kernel+bootloader instead of reflashing firmware or rootfs!!??

I am eager to know what is the problem actually,why is my maemo kernel not shown up on the list.

Thank you flipalong.
 
flipalong is offline flipalong
2010-12-28 , 07:10
Posts: 265 | Thanked: 96 times | Joined on Aug 2010 @ Sydney, Australia
#5
type in
flasher-3.5 -F <firmware-image> --flash-only=kernel -f -R
into maemo flasher

but you have to have the maemo firmware image in the flasher and the n900 connected and everything.

i had the same error when i installed nitdroid and the maemo power kernel at the same time. i still dont know what the cause was

and also flashing the kernel will erase multiboot. im not sure what itll do to meego, but maemo will stay the same.
 

The Following 2 Users Say Thank You to flipalong For This Useful Post:
manojkumaru is offline manojkumaru
2010-12-28 , 08:57
Posts: 116 | Thanked: 44 times | Joined on Nov 2010 @ Chennai, India
#6
Originally Posted by flipalong View Post
type in
flasher-3.5 -F <firmware-image> --flash-only=kernel -f -R
into maemo flasher

but you have to have the maemo firmware image in the flasher and the n900 connected and everything.

i had the same error when i installed nitdroid and the maemo power kernel at the same time. i still dont know what the cause was

and also flashing the kernel will erase multiboot. im not sure what itll do to meego, but maemo will stay the same.
Will i have to lose the apps installed or any other data if i use this method???
 
flipalong is offline flipalong
2010-12-28 , 22:46
Posts: 265 | Thanked: 96 times | Joined on Aug 2010 @ Sydney, Australia
#7
if you flash just the kernel, u keep all ur apps and ur settings and everything.
if u do a normal reflash then u lose apps and lose settings but keep ur personal files (music, pics, vids etc.)
if you do a reflash and emmc reflash, u lose everything
 
MohammadAG's Avatar
MohammadAG is offline MohammadAG
2010-12-28 , 22:58
Posts: 2,473 | Thanked: 12,265 times | Joined on Oct 2009 @ Jerusalem, PS/IL
#8
Originally Posted by flipalong View Post
type in
flasher-3.5 -F <firmware-image> --flash-only=kernel -f -R
into maemo flasher

but you have to have the maemo firmware image in the flasher and the n900 connected and everything.

i had the same error when i installed nitdroid and the maemo power kernel at the same time. i still dont know what the cause was

and also flashing the kernel will erase multiboot. im not sure what itll do to meego, but maemo will stay the same.
multiboot is tied to /sbin/preinit, flashing the kernel will not remove multiboot
Code:
flasher-3.5 -k zImage -l --boot="init=/sbin/preinit_orig ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 snd-soc-rx51.hp_lim=42 snd-soc-tlv320aic3x.hp_dac_lim=6"
should override multiboot.

Or just press 0.
 

The Following 5 Users Say Thank You to MohammadAG For This Useful Post:
Devrim is offline Devrim
2010-12-28 , 23:01
Posts: 92 | Thanked: 8 times | Joined on Mar 2010
#9
I dunno about the flash code you gave but pressing 0 didn't work for him (He really did something weird I guess...)
 

The Following User Says Thank You to Devrim For This Useful Post:
MohammadAG's Avatar
MohammadAG is offline MohammadAG
2010-12-28 , 23:13
Posts: 2,473 | Thanked: 12,265 times | Joined on Oct 2009 @ Jerusalem, PS/IL
#10
Explanation for the flasher code then;
You're loading the stock kernel image, which you can find easily on the internet, the booting it with a modified CMDLINE (kernel parameters), they're all the same actually, only init= is using the backed up preinit.

A way to get the zImage,
Download http://repository.maemo.org/pool/mae...+0m5_armel.deb
Unpack it, then unpack the .fiasco with flasher-3.5 -F .fiasco file -u

Or here: http://mohammadag.xceleo.org/public/...ls/zImage-pr13
Last edited by MohammadAG; 2010-12-28 at 23:18.
 

The Following 2 Users Say Thank You to MohammadAG For This Useful Post:
Reply
Page 1 of 3 1 23

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 18:27.

Contact Us - Home - Archive - Top