Page 6 of 10 « First 45 6 78 Last »
Reply
Thread Tools Search this Thread
jw461 is offline jw461
07-09-2012 , 02:24 AM
Posts: 42 | Thanked: 19 times | Joined on Dec 2010
#51
How did you "knife" the white frame off? I started doing it using a razor blade and even though I was going very slow, I think I may have cracked the LCD (I can see a crack behind the glass if I use a flashlight). Now I'm not sure how to proceed.
 
vitaminj's Avatar
vitaminj is offline vitaminj
07-09-2012 , 07:55 AM
Posts: 279 | Thanked: 372 times | Joined on Dec 2009 @ London, UK
#52
Argh! The word "knife" anywhere near the screen makes me shudder!

You need to unscrew the two screws inside the top, and then use the gap where the screw used to be next to the headphone port to put in a small screwdriver and lever the top-left corner of the screen out. The sim-slot-side screw levering is harder because there's nothing solid to lever against and you need to try to not damage the case (if you want to keep it).
Once enough of the top is away from the case, use a guitar plectrum or similarly solid small plastic thing to prise the screen away all the way round.
There's videos of this being done, linked to on this thread I think.
 
taviman is offline taviman
07-09-2012 , 11:00 PM
Posts: 95 | Thanked: 22 times | Joined on Jun 2012
#53
Oh brother! This thread turned into a horror story.
I have removed the screen myself with no trouble at all. Just used my fingernail to completely lift the screen. I had to repaint the black edge of the screen on the back (The paint had peeled tiny bit on the edge, so it looked like it was cracked in a certain position). A permanent marker did the job perfectly.

Ah, the N9 could have been the best candidate ever for a weather-tight phone. Just add a sealing here and there and a few things designed a bit differently.
Anybody noticed how much dust these phones collect inside?
 
jw461 is offline jw461
07-10-2012 , 10:02 PM
Posts: 42 | Thanked: 19 times | Joined on Dec 2010
#54
Horror story indeed.........my display is trashed.

What I thought was adhesive residue was actually the digitizer/LCD/whatever cracking right under the glass. So if anyone wants a N9 for parts or to buy an LCD for it, it's up on ebay # 290742572967

Back to the ol' N900 for me.
 
droosie is offline droosie
07-12-2012 , 04:26 PM
Posts: 4 | Thanked: 2 times | Joined on Apr 2012
#55
I purchased an exacto knife from at art supply store, ran the screen + white frame under an extremely hot laptop vent for about 10 minutes, and slowly but surely exactoed the screen from the frame. Anytime it appeared to be hard to cut I would put the screen back under the laptop vent. Then, I attached the new screen purchased from ebay to the white frame with crazy glue also purchased from the art supply store. Like i said, everything worked fine (except for one minor spot in the screen not working, it still doesnt work but i'm afraid to re-open the phone).
 

The Following User Says Thank You to droosie For This Useful Post:
droosie is offline droosie
07-12-2012 , 04:30 PM
Posts: 4 | Thanked: 2 times | Joined on Apr 2012
#56
Originally Posted by vitaminj View Post
Argh! The word "knife" anywhere near the screen makes me shudder!

You need to unscrew the two screws inside the top, and then use the gap where the screw used to be next to the headphone port to put in a small screwdriver and lever the top-left corner of the screen out. The sim-slot-side screw levering is harder because there's nothing solid to lever against and you need to try to not damage the case (if you want to keep it).
Once enough of the top is away from the case, use a guitar plectrum or similarly solid small plastic thing to prise the screen away all the way round.
There's videos of this being done, linked to on this thread I think.
I think you're referring to removing the screen + white frame from the housing. However, if your screen is cracked and you want to replace it, the only solution is to separate the existing screen from the white frame by knifing it off which is what I was describing before.
 
myk is offline myk
07-19-2012 , 02:00 AM
Posts: 293 | Thanked: 63 times | Joined on Jan 2008 @ Fremantle, W. Australia
#57
So nobody has managed to replace just the glass? ($20 on ebay, rather than the whole AMOLED & touchscreen assembly)

But I see now display assemblies for as little as $120 on ebay. Can anyone vouch for the quality of the displays from HK? I worry they are cheap LCDs, not original Amoled. Or worse, made for one of the Chinese N9 look-alikes, and completely incompatible with the real N9. The people doing the listings on ebay would not know.

This one is definitely fake: http://www.ebay.com.au/itm/160831321501
See the 3 buttons on the bottom of the screen? [shudder]
Last edited by myk; 07-20-2012 at 09:42 PM.
 
automagic68's Avatar
automagic68 is offline automagic68
08-11-2012 , 09:44 PM
Posts: 419 | Thanked: 153 times | Joined on Apr 2010 @ San Francisco, CA
#58
Has anyone bought a screen from either eBay user professorport or professorparts? They claim the N9 screens they sell are OEM yet when I sent them a message to confirm if it's the same screen used in Nokia Factories to build N9s they've yet to reply back to me. I assume they wouldn't lie plus they are US sellers, yet the fact that it is eBay can sometimes make me apprehensive.
__________________
Have a GREAT day!
 
myk is offline myk
08-11-2012 , 10:44 PM
Posts: 293 | Thanked: 63 times | Joined on Jan 2008 @ Fremantle, W. Australia
#59
Very possibly the people selling them on ebay don't really know anything about the product, aside from the short description from their supplier.

Unless somebody can confirm the quality of the ebay screens, I will put up with the cracks in mine.
 
ZackMorris's Avatar
ZackMorris is offline ZackMorris
08-12-2012 , 12:04 PM
Posts: 343 | Thanked: 239 times | Joined on Jul 2009 @ Northern VA
#60
Originally Posted by automagic68 View Post
Has anyone bought a screen from either eBay user professorport or professorparts? They claim the N9 screens they sell are OEM yet when I sent them a message to confirm if it's the same screen used in Nokia Factories to build N9s they've yet to reply back to me. I assume they wouldn't lie plus they are US sellers, yet the fact that it is eBay can sometimes make me apprehensive.
I Purchased a screen from them, and it is Oem But they aren't based in the USA, that Chinese prick that runs that account is a liar. INeeded my screen quickly as I had a trip that I Was going on and I asked if he was based in the USA and he said sure. This ***** charges a premium but sends stuff from China to a Forwarding address in Florida and it takes forever to get your stuff. I'd take my business elsewhere.
 

The Following 2 Users Say Thank You to ZackMorris For This Useful Post:
Reply
Page 6 of 10 « First 45 6 78 Last »

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search

 
Forum Jump


All times are GMT -4. The time now is 05:18 AM.

Contact Us - Home - Archive - Top