Reply
Thread Tools
Posts: 100 | Thanked: 6 times | Joined on Sep 2009
#1
I am trying to follow this link to complete flash of my nokia n900. Some reason latest N900 firmware update to the phone disabled my ringer in my phone. Ringer wasn't working when someone calls me. But vibrating fine. Beeps for SMS. But no ringing sound when someone calls me. So I decided to flash it with FIASCO aka *COMBINED*, flashing process worked on Windows XP 32-bit but didn't fix the ringer problem. So Now I need to go back to factory default with eMMC aka *VANILLA*. After going through the steps below:

http://wiki.maemo.org/Updating_the_t...MC_in_the_N900

I get USB device is found and then goes on to say suitable device is not found. What is this mean? Am I holding 'u' key too long or some other issue? Please help. (Windows XP 32-bit and Flasher-3.5)

C:\Program Files\maemo\flasher-3.5>
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.
VANILLA_PR_EMMC_MR0_ARM.bin -f
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.

Last edited by meme; 2012-03-06 at 02:20.
 
Posts: 304 | Thanked: 234 times | Joined on May 2010 @ Manila
#2
if you are using windows xp, install service pack 3 and nokia pc suite so it would include the usb drivers.
 
Posts: 100 | Thanked: 6 times | Joined on Sep 2009
#3
I have installed Windows XP SP3 and Nokia_Suite_webinstaller_ALL.exe. When run the command below, it is terminating. Guys any idea?


C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.
VANILLA_PR_EMMC_MR0_ARM.bin -f
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
[init 20 % 3072 / 255947 kB 910 kB/s]
C:\Program Files\maemo\flasher-3.5>
 
Posts: 273 | Thanked: 461 times | Joined on May 2011 @ Athens
#4
Do you by any chance run 64bit win XP??
 
Posts: 100 | Thanked: 6 times | Joined on Sep 2009
#5
It is 32bit, not 64bit. Any other way to fix my phone and get it to work?

I also have Windows 7 64bit and Mac OS X 10.6. Is there any way to fix this phone on Windows 7 64bit or Mac OS X 10.6 if I can't do this on Windows XP 32 bit machine?
 
Posts: 290 | Thanked: 68 times | Joined on Nov 2009 @ Barbados/London
#6
there is a usb connector .exe that youll need to install...had the same problem a few months ago when i was using my n900...im not going to be much help because i cant remember the name of the exact usb connector "plugin" but try searching the forums for "no suitable device waiting" i found it on this site....
 
Posts: 100 | Thanked: 6 times | Joined on Sep 2009
#7
Originally Posted by RobertHall View Post
there is a usb connector .exe that youll need to install...had the same problem a few months ago when i was using my n900...im not going to be much help because i cant remember the name of the exact usb connector "plugin" but try searching the forums for "no suitable device waiting" i found it on this site....
Thanks I will take a look.

Now I tried it on Mac Book Pro with 770Flasher. Its also bombs out with error:

Nokia 770 Flasher for Mac OS X
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(c) Andrew Flegg 2005.
http://www.bleb.org/software/770/ Released under the Artistic Licence.

Mon Mar 5 20:25:30 me.local CocoaDialog[255] <Error>: kCGErrorCannotComplete: CGSDeviceSynchronize: Invalid device window
Mon Mar 5 20:25:30 me.local CocoaDialog[255] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mon Mar 5 20:25:30 me.local CocoaDialog[255] <Error>: kCGErrorCannotComplete: CGSDeviceSynchronize: Invalid device window
Mon Mar 5 20:25:30 me.local CocoaDialog[255] <Error>: kCGErrorCannotComplete: CGSDeviceSynchronize: Invalid device window
Mon Mar 5 20:25:30 me.local CocoaDialog[255] <Error>: kCGErrorCannotComplete: CGSDeviceSynchronize: Invalid device window
flasher v0.8.1 (Jun 8 2006)

Image 'mmc', size 262089728 bytes
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus 002, device address 003-0421-0101-02-00
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
 
Posts: 290 | Thanked: 68 times | Joined on Nov 2009 @ Barbados/London
#8
 

The Following User Says Thank You to RobertHall For This Useful Post:
Posts: 100 | Thanked: 6 times | Joined on Sep 2009
#9
Windows 7 64bit:

I have downloaded flasher 3.5
I have downloaded libusb-win32-bin-1.2.2.0.zip

Now pressing U while N900 is being to attached the USB.

Wait for the original driver to install <- step is failing.
Anyway I went to next step, running inf-wizard.exe.

I select the item with the following properties:

Vendor ID 0x0421
Product ID 0x01C7
Manufacturer Name: Nokia Mobile Phones
Device Name: N900 (Storage Mode)

Ran the flasher 3.5. But no success:

C:\Program Files (x86)\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010
.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Sending request 0x04 failed: No error
Unable to read device info

C:\Program Files (x86)\maemo\flasher-3.5>
How can I fix this driver install issue:

Wait for the original driver to install <- step is failing.
Soon as I plug in the N900 driver is not getting installed. It is failing.

Looking for help. Thanks.

Last edited by meme; 2012-03-06 at 02:09.
 
Posts: 273 | Thanked: 461 times | Joined on May 2011 @ Athens
#10
Originally Posted by meme View Post
It is 32bit, not 64bit. Any other way to fix my phone and get it to work?

I also have Windows 7 64bit and Mac OS X 10.6. Is there any way to fix this phone on Windows 7 64bit or Mac OS X 10.6 if I can't do this on Windows XP 32 bit machine?
I have no idea I've faced a few problems with 64 bit linux and win machines but it worked fine uinder 32 bit.. If this is a desktop try the USB ports on the back.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 04:02.