N800 Usb Otg

[bleinfuss]

I have read in another post that the N800 can be set for USB OTG!!!! All the posts state that they modded existing cables to achieve this. I am not very good at that, so i found a site that may have the gender changing that MAY do the same thing.

Can anyone tell me if this is what i will need?

http://www.twstore.com/gcusbafxm.html

Thanks

[sjgadsby]

Can anyone tell me if this is what i will need?

http://www.twstore.com/gcusbafxm.html

Yes, I can tell you that part is not what you need if you want your N800 to switch modes automatically. It is not wired correctly to make the N800 autoswitch.

[bleinfuss]

Thanks,

Do you know of a site that has that adapter that would enable the auto switch mode??

[sjgadsby]

Do you know of a site that has that adapter that would enable the auto switch mode??

No. So far as I know, no one has found a commercially available adapter that does the job out of the box. That's why jolouis (http://www.internettablettalk.com/forums/member.php?u=6955), a member of these fora, is planning to sell modified adapters (http://www.internettablettalk.com/forums/showthread.php?p=133791).

[dan]

Bleinfuss,

I had same problem in that I did not to cut anything and I found a very
simple solution that akes about 20 minutes of software downloads and
going to computer store a getting an adapter that can join mini usb to regular
usb. Hardware including usb powered hub cost me $20.
Here is where I put guide and a photo of my setup. If you have any questions
just leave me a comment on the thread below. I have a dvd, printer,
sdhc cards, etc... attached. Good luck.

http://www.internettablettalk.com/forums/showthread.php?t=13572&page=12