![]() |
Re: Kernel Power port to N9 ?
If you tell me which functionality you want, I can build this kernel with these modules, but I won't be able to test it myself on device, as I have neither N9 nor N950. Do you know how to flash kernel and, in case it's broken, flash the old one? Everyone else: is there a guide for rescuing N9 after failed kernel flashing somewhere?
|
Re: Kernel Power port to N9 ?
very thanks for help misiak :)
yes i know how to flash the kernel and when this broken , flash the old one the custom kernel suport openmode ( that can chroot and run nitdroid ) and have some vpn moudel ( pptp or l2tp = slhc.ko ppp_generic.ko ppp_async.ko sha1_generic.ko ppp_mppe.ko ) and some module and perfomance you now important for later i now this difficult and lose your time , i trying to learn comile the kernel and custom it here is forum of nitdroid about kernel N9 http://forum.nitdroid.com/index.php?topic=90.0 |
Re: Kernel Power port to N9 ?
Quote:
I cannot do anything here, but I wanted to tell that your support is highly appreciated. Already thought that when I was using the N900 as main phone. |
Re: Kernel Power port to N9 ?
problem with compiling kernel with new modules is that rootfs would need updating also.
I have been trying to recompile kernel to support full NAT with IP tables, uploading all new modules etc to phone, so far with little success. Either the phone MALF and wont boot, or, when replacing all modules to match new kernel, the iptables and connected modules is still reporting not matching symbols in modules. I would be happy to test kernel and modules compiled if needed. NAT is needed to fully complete my pentest suite, possibly also to complete TOR. |
Re: Kernel Power port to N9 ?
Ok, i've seen the other thread: http://talk.maemo.org/showthread.php?t=83357 where Creamy Goodness posts just additional kernel modules for installation, so I could in fact buid the kernel with additional modules and create a deb with only additional modules for someone (farfary, nieldk?) to test (if you know what you want to do, you will test yourselves, if not - I can think of some simple test cases). Could one of you post the modules which are already installed on device with stock kernel (or openmode kernel, doesn't matter I guess) or, in other words, output of
Code:
ls /lib/modules/current |
Re: Kernel Power port to N9 ?
Quote:
Also, a 'pwer kernel' should be patched to disable Aegis. Diff to elimante Aegis aggressiveness is here: http://talk.maemo.org/showpost.php?p...&postcount=267 Here is an output of the stock pr1.3 kernel modules. Code:
/lib/modules/2.6.32.54-dfl61-20121301 $ ls |
Re: Kernel Power port to N9 ?
Output Openmode Pr 1.3 kernel
Code:
RM696-21-3_PR_001:~# ls /lib/modules/current |
All times are GMT. The time now is 02:29. |
vBulletin® Version 3.8.8