Originally Posted by deutch1976 (Post 1575340)

It is now on 2.0 but still can't install nothing to the internal disk.

Originally Posted by deutch1976 (Post 1575340)

Meego does not boot on Booklet but boots on Asus eee Pc 4g :)

Originally Posted by teroyk (Post 1575351)

How your BIOS version show up in BIOS settings is it 2.0 or 2.00-T01?
Try this first (later I give more instruction for test that hardware is fully working):
Boot with Free-DOS 1.3 Live (you can also use USB CD-drive and CD-ROM for boot, remember set it in BIOS settings boot order)
- After boot choose Use Live enviroment
- Write to command line:
fdisk (starts partitioner)
y (large support)
4 (display partition information)
- What total disk space you see? What partition you see?
- Push y-key to see logical drives if there is
- What reading in logical drive system (if there is)?

(you can also boot with USB-floppy drive with Win98SE boot floppy and there should be fdisk to use same way, except show Linux partitions as non-DOS and does not support over 137GB SSD fully)



What Meego version you tested?

Originally Posted by teroyk (Post 1575351)

How your BIOS version show up in BIOS settings is it 2.0 or 2.00-T01?
Try this first (later I give more instruction for test that hardware is fully working):
Boot with Free-DOS 1.3 Live (you can also use USB CD-drive and CD-ROM for boot, remember set it in BIOS settings boot order)
- After boot choose Use Live enviroment
- Write to command line:
fdisk (starts partitioner)
y (large support)
4 (display partition information)
- What total disk space you see? What partition you see?
- Push y-key to see logical drives if there is
- What reading in logical drive system (if there is)?

(you can also boot with USB-floppy drive with Win98SE boot floppy and there should be fdisk to use same way, except show Linux partitions as non-DOS and does not support over 137GB SSD fully)



What Meego version you tested?

Originally Posted by deutch1976 (Post 1575353)

2.00-T01 bios version

Originally Posted by teroyk (Post 1575381)

It is same version that in my Booklet. Test my above FreeDOS hint and then I can guide you to write to SSD disk.

Originally Posted by deutch1976 (Post 1575384)

I may have done something wrong but i tried to create a live usb with FreeDos and does not boot

Originally Posted by teroyk (Post 1575386)

Try in BIOS settings:
Advanced-tab
Legacy USB support: Enabled

It was needed when booting USB-floppy or USB-CD-ROM (actually I used USB Blu-Ray-drive), but I am not sure if USB-stick same way...maybe it can be also opposite. Funny thing I never tried to boot booklet with USB-stick..it so much easier burn CD or DVD.

Originally Posted by deutch1976 (Post 1575388)

I did that and it's how i boot any live USB