maemo.org - Talk

maemo.org - Talk (https://talk.maemo.org/index.php)
-   MeeGo / Harmattan (https://talk.maemo.org/forumdisplay.php?f=45)
-   -   Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help! (https://talk.maemo.org/showthread.php?t=101185)

WunderWungiel 2021-04-10 10:56
Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Hello :)I bought Nokia N9 that was stuck at bootloop, and tried to fix it.
It was stuck at Nokia logo. I downloaded MeeGo Flasher and firmware. I tried to flash with command:
Code:
flasher -F main.bin -f
But it stucks at rootfs with 32768 bytes (NA flash speed). I disconnected and tried again, the same error. I trie many times with many firmwares, but any of they works. Usually error "Downgrade is not allowed". When I try to flash with the first firmware, there is error:
Code:
flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -f                                                   
[sudo] hasło użytkownika wunderwungiel:
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 016.
Device identifier: 357923041561749 (SN: N/A)
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.341.2_PR_341
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 28847 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 017.
Device identifier: 357923041561749 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 64 %, continuing.

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init        0 %      0 /      0 kB      NA    ]
[ ] cmt-2nd      [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-algo    [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-mcusw    [pending      0 %      0 /      0 kB      NA    ]
[ ] xloader      [pending      0 %      0 /      0 kB      NA    ]
[ ] secondary    [pending      0 %      0 /      0 kB      NA    ]
[ ] kernel      [pending      0 %      0 /      0 kB      NA    ]
[ ] rootfs      [pending      0 %      0 /      0 kB      NA    ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init        0 %      1 /      1 kB      NA    ]
[ ] cmt-2nd      [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-algo    [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-mcusw    [pending      0 %      0 /      0 kB      NA    ]
[ ] xloader      [pending      0 %      0 /      0 kB      NA    ]
[ ] secondary    [pending      0 %      0 /      0 kB      NA    ]
[ ] kernel      [pending      0 %      0 /      0 kB      NA    ]
[ ] rootfs      [pending      0 %      0 /      0 kB      NA    ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1352745255)
[Pipe  0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images
And there is a warning on phone:
"Warning, software is changed bla bla bla"
Please, help! :)

aspergerguy 2021-04-10 13:28
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Quote:
Originally Posted by WunderWungiel (Post 1571546)
Fetching error list:
========================================
Downgrade disallowed (1352745255)
[Pipe 0] Finishing in error state with status 10
========================================
Unfortunately you haven't found a new enough image yet and similar problem can be found in this thread:https://talk.maemo.org/showpost.php?...10&postcount=7

Have you tried this Swiss one (480), which is usually final option available?
https://talk.maemo.org/showpost.php?p=1544436

WunderWungiel 2021-04-10 13:59
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
No, i haven't tried. I'm downloading now :) Thanks for help, I will try
Does this firmware have Polish and English language?
I'm Polish :D
And sorry for my bad English

aspergerguy 2021-04-10 14:07
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Quote:
Originally Posted by WunderWungiel (Post 1571548)
Does this firmware have Polish and English language?
Unfortunately no Polish, English, German & French certainly. No apologies necessary, your English is fine.:D

WunderWungiel 2021-04-10 14:41
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Oh, it's a pity there is no english language. What are they? Really no English? After all, even in Chinese ROMs on Android there is English

aspergerguy 2021-04-10 14:54
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Sorry my bad, English is included but no Polish.
HTML Code:
iMac:Harmattan adrian$ flasher -f -F 3290ADCC_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 20, device address 13.
Device serial number is N/A
Error claiming USB interface: Operation timed out
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.232.05.2_PR_232
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 43312 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 20, device address 14.
Device serial number is N/A
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_480
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 63 %, continuing.

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished  100 %      1 /      1 kB      NA    ]
[x] cmt-2nd      [finished  100 %      95 /      95 kB      NA    ]
[x] cmt-algo    [finished  100 %    789 /    789 kB      NA    ]
[x] cmt-mcusw    [finished  100 %    6050 /    6050 kB    3047 kB/s]
[x] xloader      [finished  100 %      23 /      23 kB      NA    ]
[x] secondary    [finished  100 %      94 /      94 kB      NA    ]
[x] kernel      [finished  100 %    2714 /    2714 kB    1824 kB/s]
[x] rootfs      [finished  100 % 1170393 / 1170393 kB  11110 kB/s]
Updating SW release
Success

WunderWungiel 2021-04-10 15:00
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Oh, so great :) I will try in 24 h
Thanks for help, love this forum :D

WunderWungiel 2021-04-11 05:03
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
I have one question. Is it for version 16 GB?
I have N9 16 GB, product code: 059L7Z9
Compatible?

aspergerguy 2021-04-11 17:26
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Quote:
Originally Posted by WunderWungiel (Post 1571554)
I have one question. Is it for version 16 GB?
I have N9 16 GB, product code: 059L7Z9
Compatible?
In above example of flashing this version of firmware I used it upon 059L5D1 which is Country Variant Switzerland CH Magenta 16GB V1_COLOR, if this helps.

WunderWungiel 2021-04-12 05:17
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
The same error :( :
Code:
flasher -F 3290ADCC_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin -f
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 005.
Device identifier: 357923041561749 (SN: N/A)
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.341.2_PR_341
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 29720 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 006.
Device identifier: 357923041561749 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_480
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 61 %, continuing.

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init        0 %      0 /      0 kB      NA    ]
[ ] cmt-2nd      [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-algo    [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-mcusw    [pending      0 %      0 /      0 kB      NA    ]
[ ] xloader      [pending      0 %      0 /      0 kB      NA    ]
[ ] secondary    [pending      0 %      0 /      0 kB      NA    ]
[ ] kernel      [pending      0 %      0 /      0 kB      NA    ]
[ ] rootfs      [pending      0 %      0 /      0 kB      NA    ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init        0 %      1 /      1 kB      NA    ]
[ ] cmt-2nd      [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-algo    [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-mcusw    [pending      0 %      0 /      0 kB      NA    ]
[ ] xloader      [pending      0 %      0 /      0 kB      NA    ]
[ ] secondary    [pending      0 %      0 /      0 kB      NA    ]
[ ] kernel      [pending      0 %      0 /      0 kB      NA    ]
[ ] rootfs      [pending      0 %      0 /      0 kB      NA    ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1352745255)
[Pipe  0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images
How to fix it? I think it is error of the phone, not software.
There isn't status progress on the phone, too :(
How do you think?
Maybe corrupted bootloader?
I don't know :(

aspergerguy 2021-04-12 11:06
Re: Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help!
 
Sorry, running out of ideas but over last couple of years had about three N9 "dying" although eMMC is the usual culprit which elicits "status 1" however.


All times are GMT. The time now is 21:59.

vBulletin® Version 3.8.8