maemo.org - Talk
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   General (https://talk.maemo.org/forumdisplay.php?f=7)
-   -   Using SSH/VNC with one IP...? (https://talk.maemo.org/showthread.php?t=10350)

barry99705 2007-10-11 18:47
Re: Using SSH/VNC with one IP...?
 
Quote:
Originally Posted by timsamoff (Post 81413)
The modem is the router... I used to bypass the router part of the modem and use an additional router for wifi, but I decided to just use the all-in-one that was provided by the DSL company. Could that be the issue?

-T.
It shouldn't be. Check the dhcp settings on the router. I'm guessing 2wire?

richrosa 2007-10-11 20:18
Re: Using SSH/VNC with one IP...?
 
You can do a reverse SSH tunnel. You can try the instructions here, or others HOW-TO available on the internet.

http://articles.techrepublic.com.com...ml?tag=nl.e011

barry99705 2007-10-11 20:19
Re: Using SSH/VNC with one IP...?
 
Quote:
Originally Posted by richrosa (Post 81468)
You can do a reverse SSH tunnel. You can try the instructions here, or others HOW-TO available on the internet.

http://articles.techrepublic.com.com...ml?tag=nl.e011
That's still not going to work if both devices have the same ip address.

timsamoff 2007-10-12 19:04
Re: Using SSH/VNC with one IP...?
 
I may have time to continue investigating tonight. (Been busy.)

Thanks,
Tim

timsamoff 2007-10-12 21:34
Re: Using SSH/VNC with one IP...?
 
Ok, I finally had a chance to run ifconfig:
Code:
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1305 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1305 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:215036 (209.9 KiB)  TX bytes:215036 (209.9 KiB)

wlan0    Link encap:Ethernet  HWaddr 00:19:4F:D5:0D:2A
          inet addr:192.168.1.72  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:219517 errors:0 dropped:0 overruns:0 frame:0
          TX packets:78287 errors:17 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:39136777 (37.3 MiB)  TX bytes:11147231 (10.6 MiB)
Which domain/address is my IT's IP? (The wlan inet value is what WifiInfo tells me it is, but that's the same as my laptop's IP.)

-T.

Milhouse 2007-10-13 13:11
Re: Using SSH/VNC with one IP...?
 
Code:
inet addr:192.168.1.72
Your IT is 192.168.1.72. What's the IP on your laptop (ipconfig in a "DOS" window) - maybe WiFi info is wrong. Are you using DHCP, have you tried to lock a DHCP IP to a particular device - usually this is done by entering the MAC, has the MAC been etered correctly? Do you have the latest router firmware?

Maybe a static IP for the tablet would be the easiest solution!

timsamoff 2007-10-13 14:10
Re: Using SSH/VNC with one IP...?
 
As I said, my laptop has the same IP as is stated in my IT's ifconfig output... I will check into everything else.

-T.

Milhouse 2007-10-13 15:13
Re: Using SSH/VNC with one IP...?
 
Quote:
Originally Posted by timsamoff (Post 81893)
As I said, my laptop has the same IP as is stated in my IT's ifconfig output... I will check into everything else.

-T.
It wasn't clear if you were making that statement based on what the router is telling you (which may or may not be accurate), or what you had determined from the laptop itself.

timsamoff 2007-10-13 16:41
Re: Using SSH/VNC with one IP...?
 
Ah, I see... I will verify that.

-T.


All times are GMT. The time now is 01:24.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8