maemo.org - Talk - How to mount USB CDROM on 2008 OS

maemo.org - Talk (https://talk.maemo.org/index.php)

- General (https://talk.maemo.org/forumdisplay.php?f=7)

- - How to mount USB CDROM on 2008 OS (https://talk.maemo.org/showthread.php?t=12491)

Re: How to mount USB CDROM on 2008 OS

Quote:

Originally Posted by pipeline (Post 114529)

I guess time will tell if having iso image capabilites is of any use for me, but if you do something like offline wikipedia (1-4 gb) it would take forever to copy as thousands of files, so packaging into a single iso image would be much faster and manageable.

You consider using tar? That seems a more natural choice to me...

Re: How to mount USB CDROM on 2008 OS

Hello guys. I'm another lucky man which can't launch usb cdrom on my n800 tablet.
I've tried 1st time using attached *.deb file, after installation i rebooted device and attach cdrom, then there were two messages the first is that usb device is not supported and the that file system is not supported. After that i ran following commands and got following answers
/home/user # mount /dev/scd0 /root/mnt -t iso9660
mount: mounting /dev/scd0 on /root/mnt failed
/home/user # mount /dev/scd0 /root/mnt -t udf
mount: mounting /dev/scd0 on /root/mnt failed
At second attempt i reupdate software os2008 and launched *.ko files from the command line. The result was the same as in my first attempt.
.
PS I use cd rom Samsung Writemaster SE-TO84L.
Could you pls give me some recommendations?

Re: How to mount USB CDROM on 2008 OS

Help! I'm having problems installing modules. When I type "insmod cdrom.ko", I'm getting "no such file or directory. Ditto for "insmod /mnt/initfs/lib/modules/2.6.21-omap1/cdrom.ko. Of course I'm root. Where are these modules located? Of course I've installed the cdrom.deb (dkpg -i cdrom.deb) as root.

Thanks in prior to all of your help!

Re: How to mount USB CDROM on 2008 OS

cdrom.ko and other modules located in this folder:
/usr/lib/
but it's no help for me :-)
The .deb is no work for me.
/sorry for my bad english/

Re: How to mount USB CDROM on 2008 OS

did u installed cdrom.deb? has it an icon for menu?

Re: How to mount USB CDROM on 2008 OS

If this is not working for you? Please provide some output.

dmesg is a command you can run from xterm to get information about whats happening when you plug in the CDROM/DVD

If you installed the deb, you do not need to reboot or do anything you should be good.

make sure the proper modules are loaded, from xterm run:
cat /proc/modules

Please paste your output for:

dmesg

and

cat /proc/modules

Re: How to mount USB CDROM on 2008 OS

Quote:

Originally Posted by italodance (Post 161364)

did u installed cdrom.deb? has it an icon for menu?

There is no icon for this

Re: How to mount USB CDROM on 2008 OS

Hi. i've just launched following commands in xterm and got next result.
/home/user # cd /usr/lib
/usr/lib # cat /proc/modules
udf 84964 0 - Live 0xbf077000
isofs 32092 0 - Live 0xbf06e000
sr_mod 13444 0 - Live 0xbf069000
sg 21592 0 - Live 0xbf062000
cdrom 35164 1 sr_mod, Live 0xbf058000
g_file_storage 27560 0 - Live 0xbf050000
cx3110x 56200 0 - Live 0xbf041000
umac 258788 1 cx3110x, Live 0xbf000000 (P)
/usr/lib # dmegs
/bin/sh: dmegs: not found

Could you pls explain what I'm doing wrong?

Re: How to mount USB CDROM on 2008 OS

It's dmesg not dmegs

Re: How to mount USB CDROM on 2008 OS

Sorry i made a misprint :) Here is a part of summary what i've got
88465.820312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88738.375000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88743.390625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[88871.664062] DSP Pausing failed, skipping OP change!
[89320.726562] DSP Pausing failed, skipping OP change!
[89545.117187] EAC mode: play enabled, rec enabled
[89547.820312] EAC mode: play disabled, rec disabled
[90335.539062] EAC mode: play enabled, rec enabled
[90338.429687] EAC mode: play disabled, rec disabled
[90399.187500] EAC mode: play enabled, rec enabled
[90401.890625] EAC mode: play disabled, rec disabled
[90403.085937] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90403.117187] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90411.578125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90411.781250] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90414.250000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90419.265625] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90430.687500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90436.265625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90449.351562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90454.367187] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[90458.421875] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90516.875000] menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
[90524.054687] EAC mode: play enabled, rec enabled
[90526.945312] EAC mode: play disabled, rec disabled
[92030.437500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[92035.921875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119456.390625] EAC mode: play enabled, rec enabled
[119459.281250] EAC mode: play disabled, rec disabled
[119499.234375] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119499.507812] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119499.593750] hub 1-0:1.0: state 8 ports 1 chg 0000 evt 0000
[119499.593750] usb usb1: usb auto-resume
[119499.593750] usb usb1: finish resume
[119499.593750] hub 1-0:1.0: hub_resume
[119499.617187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119499.773437] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119499.898437] usb 1-1: new high speed USB device using musb_hdrc and address 2
[119500.031250] usb 1-1: default language 0x0409
[119500.031250] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119500.031250] usb 1-1: Product: USB Mass Storage Device
[119500.031250] usb 1-1: Manufacturer: TSST corp
[119500.031250] usb 1-1: SerialNumber: SET084MP00000002A01
[119500.031250] usb 1-1: device v0409 p0840 is not supported
[119500.031250] usb 1-1: uevent
[119500.031250] usb 1-1: usb_probe_device
[119500.031250] usb 1-1: configuration #1 chosen from 1 choice
[119500.031250] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119500.031250] usb 1-1:1.0: uevent
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface
[119500.031250] usb-storage 1-1:1.0: usb_probe_interface - got id
[119500.046875] scsi0 : SCSI emulation for USB Mass Storage devices
[119500.046875] drivers/usb/core/inode.c: creating file '002'
[119500.046875] hub 1-0:1.0: 198mA power budget left
[119500.046875] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119500.046875] hub 1-0:1.0: port 1 enable change, status 00000503
[119500.054687] usb-storage: device found at 2
[119500.054687] usb-storage: waiting for device to settle before scanning
[119500.101562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.062500] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119505.140625] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119505.812500] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119505.812500] Uniform CD-ROM driver Revision: 3.20
[119505.812500] sr 0:0:0:0: Attached scsi CD-ROM sr0
[119505.812500] sr 0:0:0:0: Attached scsi generic sg0 type 5
[119505.859375] usb-storage: device scan complete
[119506.007812] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119511.070312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119527.960937] EAC mode: play enabled, rec enabled
[119530.664062] EAC mode: play disabled, rec disabled
[119673.242187] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[119673.390625] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[119674.718750] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[119674.992187] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[119674.992187] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119674.992187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[119674.992187] usb 1-1: USB disconnect, address 2
[119674.992187] usb 1-1: unregistering device
[119674.992187] usb 1-1: usb_disable_device nuking all URBs
[119674.992187] usb 1-1: unregistering interface 1-1:1.0
[119674.992187] usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
[119674.992187] usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
[119675.000000] usb 1-1:1.0: uevent
[119675.000000] usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00
[119675.000000] usb 1-1: uevent
[119675.156250] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[119675.281250] usb 1-1: new high speed USB device using musb_hdrc and address 3
[119675.414062] usb 1-1: default language 0x0409
[119675.414062] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[119675.414062] usb 1-1: Product: USB Mass Storage Device
[119675.414062] usb 1-1: Manufacturer: TSST corp
[119675.414062] usb 1-1: SerialNumber: SET084MP00000002A01
[119675.414062] usb 1-1: device v0409 p0840 is not supported
[119675.414062] usb 1-1: uevent
[119675.414062] usb 1-1: usb_probe_device
[119675.414062] usb 1-1: configuration #1 chosen from 1 choice
[119675.414062] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[119675.414062] usb 1-1:1.0: uevent
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface
[119675.414062] usb-storage 1-1:1.0: usb_probe_interface - got id
[119675.421875] scsi1 : SCSI emulation for USB Mass Storage devices
[119675.429687] drivers/usb/core/inode.c: creating file '003'
[119675.429687] hub 1-0:1.0: 198mA power budget left
[119675.429687] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[119675.429687] hub 1-0:1.0: port 1 enable change, status 00000503
[119675.437500] usb-storage: device found at 3
[119675.437500] usb-storage: waiting for device to settle before scanning
[119680.453125] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[119681.203125] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[119681.203125] sr 1:0:0:0: Attached scsi CD-ROM sr0
[119681.203125] sr 1:0:0:0: Attached scsi generic sg0 type 5
[119681.226562] usb-storage: device scan complete
[119690.851562] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119693.734375] cdrom: sr0: mrw address space DMA selected
[119694.218750] cdrom: sr0: mrw address space DMA selected
[119694.453125] cdrom: sr0: mrw address space DMA selected
[119698.828125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119744.718750] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119751.500000] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119760.132812] EAC mode: play enabled, rec enabled
[119762.835937] EAC mode: play disabled, rec disabled
[119775.171875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119780.187500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[119794.859375] EAC mode: play enabled, rec enabled
[119797.750000] EAC mode: play disabled, rec disabled
[119976.031250] EAC mode: play enabled, rec enabled
[119978.734375] EAC mode: play disabled, rec disabled
[119988.796875] EAC mode: play enabled, rec enabled
[119991.742187] EAC mode: play disabled, rec disabled
[119994.882812] EAC mode: play enabled, rec enabled
[119997.773437] EAC mode: play disabled, rec disabled
[120003.265625] tusb_source_power 629: VBUS b_idle, devctl 98 otg 178 conf c0000003 prcm 00a80500
[120003.414062] tusb_otg_ints 743: Forcing disconnect (no interrupt)
[120003.890625] hub 1-0:1.0: logical disconnect on port 1
[120003.890625] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[120003.890625] hub 1-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
[120003.890625] usb 1-1: USB disconnect, address 3
[120003.890625] usb 1-1: unregistering device

Re: How to mount USB CDROM on 2008 OS

[120003.890625] usb 1-1: usb_disable_device nuking all URBs
[120003.890625] usb 1-1: unregistering interface 1-1:1.0
[120003.890625] usbdev1.3_ep81: ep_device_release called for usbdev1.3_ep81
[120003.890625] usbdev1.3_ep02: ep_device_release called for usbdev1.3_ep02
[120003.890625] usb 1-1:1.0: uevent
[120003.890625] usbdev1.3_ep00: ep_device_release called for usbdev1.3_ep00
[120003.890625] usb 1-1: uevent
[120004.023437] scsi 1:0:0:0: rejecting I/O to dead device
[120004.023437] scsi 1:0:0:0: rejecting I/O to dead device
[120004.039062] scsi 1:0:0:0: rejecting I/O to dead device
[120004.039062] scsi 1:0:0:0: rejecting I/O to dead device
[120004.039062] scsi 1:0:0:0: rejecting I/O to dead device
[120004.039062] scsi 1:0:0:0: rejecting I/O to dead device
[120005.890625] hub 1-0:1.0: hub_suspend
[120005.890625] usb usb1: usb auto-suspend
[120153.250000] EAC mode: play enabled, rec enabled
[120155.953125] EAC mode: play disabled, rec disabled
[120174.671875] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[120179.687500] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[120200.515625] EAC mode: play enabled, rec enabled
[120203.406250] EAC mode: play disabled, rec disabled
[125719.320312] tusb_source_power 629: VBUS a_wait_vrise, devctl 81 otg 184 conf c0010001 prcm 00a80500
[125719.593750] musb_stage0_irq 646: CONNECT (a_host) devctl 5d
[125719.593750] hub 1-0:1.0: state 8 ports 1 chg 0000 evt 0000
[125719.593750] usb usb1: usb auto-resume
[125719.593750] usb usb1: finish resume
[125719.593750] hub 1-0:1.0: hub_resume
[125719.617187] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[125719.773437] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[125719.898437] usb 1-1: new high speed USB device using musb_hdrc and address 4
[125720.070312] usb 1-1: default language 0x0409
[125720.070312] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[125720.070312] usb 1-1: Product: USB Mass Storage Device
[125720.070312] usb 1-1: Manufacturer: TSST corp
[125720.070312] usb 1-1: SerialNumber: SET084MP00000002A01
[125720.070312] usb 1-1: device v0409 p0840 is not supported
[125720.070312] usb 1-1: uevent
[125720.070312] usb 1-1: usb_probe_device
[125720.070312] usb 1-1: configuration #1 chosen from 1 choice
[125720.570312] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[125720.578125] usb 1-1:1.0: uevent
[125720.578125] usb-storage 1-1:1.0: usb_probe_interface
[125720.578125] usb-storage 1-1:1.0: usb_probe_interface - got id
[125720.593750] scsi2 : SCSI emulation for USB Mass Storage devices
[125720.601562] drivers/usb/core/inode.c: creating file '004'
[125720.601562] hub 1-0:1.0: 198mA power budget left
[125720.601562] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[125720.601562] hub 1-0:1.0: port 1 enable change, status 00000503
[125720.601562] usb-storage: device found at 4
[125720.601562] usb-storage: waiting for device to settle before scanning
[125724.359375] EAC mode: play enabled, rec enabled
[125725.617187] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SE-T084L TS00 PQ: 0 ANSI: 0
[125726.242187] sr0: scsi3-mmc drive: 6x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[125726.242187] sr 2:0:0:0: Attached scsi CD-ROM sr0
[125726.242187] sr 2:0:0:0: Attached scsi generic sg0 type 5
[125726.265625] usb-storage: device scan complete
[125727.062500] EAC mode: play disabled, rec disabled
[125828.945312] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[125833.960937] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8)
[125904.039062] EAC mode: play enabled, rec enabled
[125906.742187] EAC mode: play disabled, rec disabled

Re: How to mount USB CDROM on 2008 OS

It all looks good so far

Can you try the mount again and paste any output here?

if it fails, also in xterm type

mount

and paste the output here

Re: How to mount USB CDROM on 2008 OS

Pls see following result:

/home/user # mount
rootfs on / type rootfs (rw)
/dev/root on /mnt/initfs type jffs2 (ro)
none on /mnt/initfs/proc type proc (rw)
none on /mnt/initfs/sys type sysfs (rw)
none on /mnt/initfs/tmp type tmpfs (rw)
/dev/mtdblock4 on / type jffs2 (rw,rpsize=1024,rpuid=0,rpuid=30000)
none on /tmp type tmpfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
none on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
/dev/mmcblk0p1 on /media/mmc2 type vfat (rw,nosuid,nodev,noexec,uid=29999,fmask=0133 ,dmask=0000,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8)
/dev/mmcblk1p1 on /media/mmc1 type vfat (rw,nosuid,nodev,noexec,uid=29999,fmask=0133 ,dmask=0000,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8)

Re: How to mount USB CDROM on 2008 OS

You did not paste the mount command that is failing for you. What happens when you actually try to mount it, wheat error are you getting?

Re: How to mount USB CDROM on 2008 OS

I've already paste, pls see
/usr/lib # mount /dev/scd0 /root/mmnt -t iso9660
mount: mounting /dev/scd0 on /root/mmnt failed
/usr/lib # mount /dev/scd0 /root/mmnt -t udf
mount: mounting /dev/scd0 on /root/mmnt failed

Re: How to mount USB CDROM on 2008 OS

Hi guys, I've just few minutes ago inserted audio cd in my cdrom and connected it to n800. The folder named scd0 appeared in file manager, but unfortunately there is no any data in this folder.
Could you pls help me to connect and use cdrom on my tablet

Re: How to mount USB CDROM on 2008 OS

Congratulations, I connected cdrom to my n800.
.
It was done after simple action, I created folder mmnt in /root in mc.
.
So now I can use all the data I have on my cds ))))

Re: How to mount USB CDROM on 2008 OS

Quote:

Originally Posted by penguinbait (Post 102277)

Download the modules
http://penguinbait.com/modules.tar

UPDATE USE THE DEB INSTEAD, thats it no reboot or anything
Attachment 633
Penguinbait actually made a deb, what is the world coming to?

insmod cdrom.ko
insmod sg.ko
insmod sr_mod.ko
insmod udf.ko
insmod isofs.ko

plug in usb CDROM

use (or where ever you want to mount it)
mount /dev/scd0 /root/mnt -t iso9660
mount /dev/scd0 /root/mnt -t udf

I think it will choose automatically, but you can force the filesystem

Are you guys having as much fun as me :D

PS

I want some thanks for this :)

Penguinbait i installed cdrom.deb but tell me what is http://penguinbait.com/modules.tar and i need to add them to my n800 os2008 device??

Re: How to mount USB CDROM on 2008 OS

hi, i have problem with my usb cdrom (cdwriter), i installed .deb, modules are loaded

here is my lsmod:
udf 84964 0 - Live 0xbf077000
isofs 32092 0 - Live 0xbf06e000
sr_mod 13444 0 - Live 0xbf069000
sg 21592 0 - Live 0xbf062000
cdrom 35164 1 sr_mod, Live 0xbf058000
g_file_storage 27560 0 - Live 0xbf050000
cx3110x 56200 0 - Live 0xbf041000
umac 258788 1 cx3110x, Live 0xbf000000 (P)

when i attach cdrom the device in /dev doesnt create, here is part of dmesg:
[ 673.242187] usb 1-1: new full speed USB device using musb_hdrc and address 2
[ 673.375000] usb 1-1: ep0 maxpacket = 16
[ 673.375000] usb 1-1: default language 0x0409
[ 673.375000] usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
[ 673.375000] usb 1-1: Product: HP USB CD-Writer Plus
[ 673.375000] usb 1-1: device v03f0 p0207 is not supported
[ 673.375000] usb 1-1: uevent
[ 673.375000] usb 1-1: usb_probe_device
[ 673.375000] usb 1-1: configuration #1 chosen from 1 choice
[ 673.375000] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 673.375000] usb 1-1:1.0: uevent
[ 673.375000] usbtest 1-1:1.0: usb_probe_interface
[ 673.375000] usbtest 1-1:1.0: usb_probe_interface - got id
[ 673.382812] drivers/usb/core/inode.c: creating file '002'
[ 673.382812] hub 1-0:1.0: 200mA power budget left
[ 673.382812] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 673.382812] hub 1-0:1.0: port 1 enable change, status 00000103
[ 675.382812] usb 1-1: usb auto-suspend
[ 677.406250] hub 1-0:1.0: hub_suspend
[ 677.406250] usb usb1: usb auto-suspend

does anybody know how to fix it? it works well with my linux laptop..thanks

Re: How to mount USB CDROM on 2008 OS

Quote:

Originally Posted by fpp (Post 102608)

Neat hack, but what sort of practical use ? :-)

Someone should make a mini portable CD reader/writer... you know, one that would just use the small format discs. That would go really well with my N810...

Re: How to mount USB CDROM on 2008 OS

Quote:

Originally Posted by Texrat (Post 221584)

Someone should make a mini portable CD reader/writer... you know, one that would just use the small format discs. That would go really well with my N810...

Well I just burned my first CD from my 810. Package will be forthcoming, but your gonna need KDE. So I imagine its not going to help Texrat much, but its possible I just did it.

K3B

http://penguinbait.com/cdburn.png

Re: How to mount USB CDROM on 2008 OS

Quote:

Originally Posted by HaZtile (Post 162043)

NOTHING

I am sorry, I just attempted to use this and the modules all load, but they do not work. I just recompiled the modules and it works again. I will update the (deb) shortly.

Re: How to mount USB CDROM on 2008 OS

See the first post it has been updated with a new deb that works with the latest OS version.

Re: How to mount USB CDROM on 2008 OS

Quote:

Originally Posted by penguinbait (Post 228057)

I was able to burn my entire flash partition to a CD. I should have a package soon for burning (its already done, I am testing again now) but again KDE will be a prereq. Although the command line tools will all be available inside the deb. Without KDE though you will not have the k3b frontend.

cdda2wav
cue2toc
dvd-ram-control
isoinfo
readcd
toc2mp3
cdrdao
dvd+rw-booktype
growisofs
isovfy
rscsi
dvd+rw-format
isodebug
toc2cddb
cdrecord
dvd+rw-mediainfo
isodump
mkisofs
toc2cue

Re: How to mount USB CDROM on 2008 OS

I just mounted a suse linux dvd using a lite-on external (mains-powered) USB dvd drive (one of these: http://www.ebuyer.com/product/156222 - quite a bargain at GB£31 or US$50!), so I am extremely please!