How to setup VoipDiscount Account on N800?
 

I tried to setup my voipdiscount account with the following information on my n800:
http://www.voipdiscount.com/en/sipp.html

But it failed to connect to the SIP network when I tried to dial up.Anybody knows how to set it up correctly?:confused:

Re: How to setup VoipDiscount Account on N800?
 

It should be the same config as voipbuster, search voipbuster in this forum for guidance and ilbc problems.

Re: How to setup VoipDiscount Account on N800?
 

Hi,
I use VOIP with voipstunt and another account, both active and good working, on my N800. I am using RTCOMM (search google for rtcomm maemo, first hit), and as in post #2 fix the ilbc problem (easy forum search).

I post here my voipstunt account configuration, maybe can be useful:

user name: YOURNAME @ voipstunt.com
passws: yours
checked "use for PSTN calls"
ADVANCED:
- Connection:
Transport: Auto
Outgoing proxy: sip.voipstunt.com
Port 5060
"Discover.." checked, Keep-alive auto, keep-alive frequency 0
-Authentication:
Just your ID and pass, without any @voipstunt.com
-Stun:
no autodetect STUN, use "stun.voipstunt.com" as server, port 3478.

I hope it will work also for you, all the best,

Nicola

Re: How to setup VoipDiscount Account on N800?
 

Please, start by reading the Wiki -- http://www.internettablettalk.com/wi...#Communication

And obviously, you didn't bother to search either :P

http://www.internettablettalk.com/fo...archid=1542500

Re: How to setup VoipDiscount Account on N800?
 

Thank you everybody(especially confini),it works now!

Re: How to setup VoipDiscount Account on N800?
 

You might want to check that this workaround (it's not a fix) does not disable Gizmo/Skype calling. I'm looking into this now as my Gizmo/Skype is not playing nice without the iLBC codec enabled :P

Re: How to setup VoipDiscount Account on N800?
 

Update: Skype works, Voipbuster works, Gizmo does not. As expected :)

Re: How to setup VoipDiscount Account on N800?
 

I didn't have much trouble setting up the account, and I can call (once I noticed that I had to add a "1" before the phone number).

However, when answer the call, there is no sound going in either direction. Googling "VOIP no sound" turned up some hits that made it sound like I am perhaps just not understanding how VOIP with SIP is supposed to work.

I also tried using "Linphone" on Linux, with the same effect -- dialing "15551234567@sip.voipdiscount.com" resulted in the call going through, but with no sounds...

What might I be missing?

Re: How to setup VoipDiscount Account on N800?
 

Do you happen to have the OGG Support (allows you to playback OGG files on the tablet) installed? If so, that's been known to cause audio issues.

Re: How to setup VoipDiscount Account on N800?
 

Following some of the directions that I found while searching for this, I moved away a library that was supposed to be problematic ("libgstdspilpbc.so"). I also just removed the ogg library with "apt-get", but that didn't seem to make any difference...

Re: How to setup VoipDiscount Account on N800?
 

erm, reflash?

Re: How to setup VoipDiscount Account on N800?
 

I posted this elsewhere, but here it is again, just for the record. It's a step by step, dummies guide for complete beginners written by myself!

1. On your N800, go to:
http://www.gronmayer.com/it/index.ph...&system=maemo4

2. Find the Eko One repository and add it to your N800 applications manager (click to install icon makes it easy on gronmayer's page)

3. In your application manager, browse installable applications, click all, and install becomeroot (this enables rd mode).

4. In application manager, go to tools, application catalogue, click new, and in web address erase http:// and input the word 'matrix'. Click cancel and click red when asked which pill you want (this enables red pill mode)

5. Now open x-terminal and input the following commands carefully letter by letter:

a. sudo gainroot (press enter)
b. cd /usr/lib/gstreamer-0.10 (press enter)
c. mv libgstdspilbc.so libgstdspilpbc.so.off (press enter)

6. In application manager, go to tools, application catalogue, click new, and in web address erase http:// and input the word 'matrix'. Click cancel and click blue when asked which pill you want (this returns you to blue pill mode)

You're done! Now just enter your voipbuster settings into the control panel/accounts (included RTCom in N800) and voipbuster/voipdiscount/whatever will work perfectly.

I've registered an account here to help people who are as lost as I was. I was lucky to find steps 2 and 3 (enabling RD mode) tonight!!

Thanks everyone for making this a great forum for the Nokia tablets!! I hope this helped someone!

Re: How to setup VoipDiscount Account on N800?
 

Infact,I didn't rename any file（or do any hack）,but it does work.

Re: How to setup VoipDiscount Account on N800?
 

I get the same problem with voipstunt. Can anybody help me?
I removed libstdspilbc.so, checked about ogg. But I still have no sound. The opponent hear me well.