Re: mke2fs /dev/mmcblk1p2 fails and rebooting n810
 

BusyBox v1.6.1 (2008-09-18 09:43:17 EEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ df -h
Filesystem Size Used Available Use% Mounted on
/dev/mtdblock4 4.3M 2.5M 1.8M 58% /mnt/initfs
none 512.0k 76.0k 436.0k 15% /mnt/initfs/tmp
/dev/mtdblock4 249.3M 152.9M 96.3M 61% /
none 512.0k 80.0k 432.0k 16% /tmp
none 1.0M 76.0k 948.0k 7% /dev
tmpfs 1.0M 0 1.0M 0% /dev/shm
/dev/mmcblk0p1 255.7M 0 255.7M 0% /media/mmc2
/dev/mmcblk1p1 255.7M 0 255.7M 0% /media/mmc1
~ $

Re: mke2fs /dev/mmcblk1p2 fails and rebooting n810
 

It looks like these are both partitioned. mmcblk0 (mmc2), should be the card we are talking about right?

run as root

fdisk -l /dev/mmcblk0

and


fdisk -l /dev/mmcblk1


What are you doing with your internal card, is this setup as booting also?

Re: mke2fs /dev/mmcblk1p2 fails and rebooting n810
 

right before i sent you that i started to set up to boot from internal SD (which worked) i just wanted to make sure i wasn't doing anything wrong.

Do you still want me to fdisk both?

Re: mke2fs /dev/mmcblk1p2 fails and rebooting n810
 

You have to partition the system from flash. You cannot boot to SD and partition properly, even if your partitioning the other card. At least not with the default kernel

All the FDISK -L does is list the partitions on the cards