maemo.org - Talk - Installing libqt and keepasx

maemo.org - Talk (https://talk.maemo.org/index.php)

- Applications (https://talk.maemo.org/forumdisplay.php?f=41)

- - Installing libqt and keepasx (https://talk.maemo.org/showthread.php?t=29708)

Re: Installing libqt and keepasx

Quote:

Originally Posted by VulcanRidr (Post 298715)

The Bluetooth keyboard takes a long time to disconnect, enough so that I hit the button again the first couple of times and ended up reconnecting it
The charging is odd. I plugged into an outlet, and while the "Charging" message came up momentarily as usual, the battery icon did not show the charging indication.
Books take a really, really long time to come up in FBreader. Instead of taking about 5 seconds, it takes upwards of 15 seconds to load. (estimated)

Is this a result of moving /var/log/apt? Or a result of qt4 being installed? Something else?

Thanks,
--vr

I have a few additional items to add, ranging from annoying to critical...

In addition to the battery icon not going into motion, the little spinner when loading apps is gone. The little text box is still there, but the spinny icon is gone.
This is a show stopper...The map doesn't move when using maemo mapper. The app found the satellites and the little compass rose is spinning, but the map is still where I left it last time I used maemo mapper. It did not update the map to my current location like it always does.

This puts me in an interesting situation. Unless someone has advice on how to get this all working, I am going to uninstall qt and (unfortunately) keepassx.

Thanks,
--vr

Re: Installing libqt and keepasx

These problems are almost certainly not caused by Qt (except maybe indirectly like by filling up the disk), I have it installed on several occasions and never encountered such behaviour (it's not even used by default so can't really interfere with applets and hildon until you start a qt app).

Re: Installing libqt and keepasx

Quote:

Originally Posted by attila77 (Post 299396)

I don't see anything that is full, though some are close:

Code:

/mnt/initfs (/dev/mtdblock4)    65% of 4M

/ (/dev/mtdblock4)    96% of 249.5M

/media/mmc2 (/dev/mmcblk0p1) 10% of 1.9G

/media/mmc1 (/dev/mmcblk1p1)    64% of 14.6G

/debian (/dev/dm-0)    84% of 1.2G

/debian/var/tmp (/dev/mtdblock4)    96% of 249.5M

/debian/home/user (/dev/mtdblock4)    2% of 6M

See anything that seems to be not right?

--vr

Re: Installing libqt and keepasx

Quote:

Originally Posted by VulcanRidr (Post 299440)

I don't see anything that is full, though some are close:

Code:

/mnt/initfs (/dev/mtdblock4)    65% of 4M

/ (/dev/mtdblock4)    96% of 249.5M

/media/mmc2 (/dev/mmcblk0p1) 10% of 1.9G

/media/mmc1 (/dev/mmcblk1p1)    64% of 14.6G

/debian (/dev/dm-0)    84% of 1.2G

/debian/var/tmp (/dev/mtdblock4)    96% of 249.5M

/debian/home/user (/dev/mtdblock4)    2% of 6M

See anything that seems to be not right?

--vr

Well, Atilla77, you were correct. It was not qt4. I uninstalled all of it and keepassx, just to test, and still see the same behavior.

I guess a reflash is in my future, and I may as well start reading up on pbeasy while I'm at it. :)

Got a link to the best practices for deploying it?

--vr

Re: Installing libqt and keepasx

http://talk.maemo.org/showthread.php...ghlight=pbeasy

I just followed this and it went quite smoothly...